EN 15011:2011+A1:2014

Cranes - Bridge and gantry cranes

This European Standard applies to bridge and gantry cranes able to travel by wheels on rails, runways or roadway surfaces, and to gantry cranes without wheels mounted in a stationary position.
This European Standard specifies requirements for all significant hazards, hazardous situations and events relevant to bridge and gantry cranes when used as intended and under conditions foreseen by the manufacturer (see Clause 4).
This European Standard does not include requirements for the lifting of persons.
The specific hazards due to potentially explosive atmospheres, ionising radiation and operation in electromagnetic fields beyond the range of EN 61000-6-2 are not covered by this European Standard.
This European Standard is applicable to bridge and gantry cranes manufactured after the date of its publication as an EN.

Krane - Brücken- und Portalkrane

Appareils de levage à charge suspendue - Ponts roulants et portiques

!La présente Norme européenne s'applique aux portiques et ponts roulants pouvant se déplacer par l'intermédiaire de roues (galets) sur des rails, chemins de roulement ou routes et aux ponts roulants sans roues (galets) montés en position fixe."
La présente Norme européenne traite de l'ensemble des phénomènes dangereux significatifs, des situations et des événements dangereux liés aux ponts roulants et aux portiques lorsque ceux-ci sont utilisés conformément à l'usage prévu et dans les conditions prévues par le fabricant (voir Article 4).
La présente Norme européenne ne contient pas de prescriptions relatives au levage de personnes.
Les phénomènes dangereux spécifiques dus à des atmosphères potentiellement explosives, un rayonnement ionisant et un fonctionnement dans des champs électromagnétiques allant au-delà de la plage de l'EN 61000-6-2 ne sont pas couverts par la présente Norme européenne.
La présente Norme est applicable aux ponts roulants et aux portiques qui sont fabriqués après sa date de publication comme Norme Européenne (EN).

Žerjavi - Mostni in portalni (kozičasti) žerjavi (vključno z dopolnilom A1)

General Information

• Status: Withdrawn
• Publication Date: 18-Feb-2014
• Withdrawal Date: 08-Dec-2020
• ICS: 53.020.20 - Cranes
• Technical Committee: CEN/TC 147 - Cranes - Safety
• Drafting Committee: CEN/TC 147/WG 14 - Bridge and gantry cranes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 09-Dec-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 15011:2011+A1:2014 - Cranes - Bridge and gantry cranes

Relations

• Merged From: EN 15011:2011/FprA1 - Cranes - Bridge and gantry cranes
• Effective Date: 18-Jan-2023
• Merged From: EN 15011:2011 - Cranes - Bridge and gantry cranes
• Effective Date: 30-Oct-2013
• Replaced By: EN 15011:2020 - Cranes - Bridge and gantry cranes
• Effective Date: 15-Feb-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Krane - Brücken- und PortalkraneAppareils de levage à charge suspendue - Ponts roulants et portiquesCranes - Bridge and gantry cranes53.020.20DvigalaCranesICS:Ta slovenski standard je istoveten z:EN 15011:2011+A1:2014SIST EN 15011:2011+A1:2014en,fr,de01-marec-2014SIST EN 15011:2011+A1:2014SLOVENSKI
STANDARDSIST EN 15011:20111DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15011:2011+A1
February 2014 ICS 53.020.20 Supersedes EN 15011:2011English Version
Cranes - Bridge and gantry cranes
Appareils de levage à charge suspendue - Ponts roulants et portiques
Krane - Brücken- und Portalkrane This European Standard was approved by CEN on 18 December 2010 and includes Amendment 1 approved by CEN on 19 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15011:2011+A1:2014 ESIST EN 15011:2011+A1:2014

Guidance for specifying the operating duty according to EN 13001-1 . 50 Annex B (informative)
Guidance for specifying the classes P of average number of accelerations according to EN 13001-1 . 58 Annex C (informative)
Calculation of dynamic coefficient ¥h(t) . 59 Annex D (normative)
Loads caused by skewing . 62 Annex E (informative)
Local stresses in wheel supporting flanges . 70 Annex F (normative)
Noise test code . 75 Annex G (informative)
Actions on crane supporting structures induced by cranes . 83 Annex H (informative)
Selection of a suitable set of crane standards for a given application . 85 Annex ZA (informative)
Relationship between this European standard and the Essential Requirements of EU Directive 2006/42/EC . 86 Bibliography . 87
(IEC 60825-1:2007) EN 60947-5-5, Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997) EN ISO 3744:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 4871, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 1120
...