EN 10230-1:1999
(Main)Steel wire nails - Part 1: Loose nails for general applications
Steel wire nails - Part 1: Loose nails for general applications
This European Standard specifies requirements for preferred form and dimensions, tolerance on dimensions and surface coating of loose steel wire nails for general applications.
Nägel aus Stahldraht - Teil 1: Lose Nägel für allgemeine Verwendungszwecke
Diese Europäische Norm legt Anforderungen hinsichtlich der zu bevorzugenden Formen und Maße, Maßtoleranzen und Oberflächenüberzüge für lose Nägel für allgemeine Verwendungszwecke fest.
Pointes en fil d'acier - Partie 1: Pointes pour usage général
La présente norme européenne spécifie les prescriptions relatives aux formes et dimensions préférentielles, à la tolérance sur les dimensions et au revêtement des pointes en fil d'acier pour usage général.
Jekleni žičniki - 1. del: Žičniki za splošno uporabo
General Information
- Status
- Published
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 30-May-2000
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Drafting Committee
- ECISS/TC 30 - Steel wires
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 03-Sep-2025
- Completion Date
- 23-Sep-2025
- Directive
- 89/106/EEC - Construction products
Overview
EN 10230-1:1999 - Steel wire nails - Part 1: Loose nails for general applications (CEN) defines requirements for loose steel wire nails intended for general-purpose use. The standard specifies the preferred form and dimensions, tolerances on dimensions, and surface coating expectations for loose steel wire nails. This makes EN 10230-1 a reference for consistent product specification, manufacturing and procurement of steel wire nails across Europe.
Key topics and technical requirements
The standard focuses on practical, dimension-related requirements rather than performance testing or material chemistry. Main technical topics include:
- Preferred form and dimensions - standardized shapes and nominal sizes to ensure interchangeability and consistent fit in common applications.
- Dimensional tolerances - allowable deviations from nominal dimensions to control quality and ensure compatibility with nail-setting equipment and fastener applications.
- Surface coating requirements - acceptable types or conditions of surface finish/coating for corrosion protection and handling, as applicable for general applications.
- Scope limitation - applies to loose (uncollected) steel wire nails intended for general use; it does not extend to specialized or collated fasteners unless otherwise stated in related documents.
(Notes: EN 10230-1 sets geometric and coating requirements; specific mechanical properties, test methods, or material grades are not detailed in the provided scope.)
Practical applications
EN 10230-1 is relevant wherever loose steel wire nails are specified, sold or used:
- Manufacturers - to design production lines and quality controls that meet standardized sizes and coatings.
- Distributors and traders - to list and verify product conformity when supplying loose nails for general-purpose markets.
- Buyers and procurement teams - to write clear specifications in purchase orders, ensuring supplied nails meet expected dimensions and finishes.
- Carpenters, joiners and construction contractors - to select compatible loose nails for general wood and building applications where standard sizing and coatings matter.
- Quality assurance and inspection - to assess dimensional conformity and surface coating against recognized European requirements.
Related standards
For complete specification and application context, users commonly consult other CEN/EN standards covering fasteners, wire products and specialized nails. When precise mechanical properties, collated nails, or performance testing are required, refer to additional EN standards covering those topics.
Keywords: EN 10230-1:1999, steel wire nails, loose nails, dimensions, tolerances, surface coating, CEN standard, nail specifications, fasteners, manufacturers, quality control.
Frequently Asked Questions
EN 10230-1:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel wire nails - Part 1: Loose nails for general applications". This standard covers: This European Standard specifies requirements for preferred form and dimensions, tolerance on dimensions and surface coating of loose steel wire nails for general applications.
This European Standard specifies requirements for preferred form and dimensions, tolerance on dimensions and surface coating of loose steel wire nails for general applications.
EN 10230-1:1999 is classified under the following ICS (International Classification for Standards) categories: 21.060.50 - Pins, nails. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10230-1:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/BC/CEN/87/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 10230-1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nägel aus Stahldraht - Teil 1: Lose Nägel für allgemeine VerwendungszweckePointes en fil d'acier - Partie 1: Pointes pour usage généralSteel wire nails - Part 1: Loose nails for general applications77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains21.060.50Pins, nailsICS:Ta slovenski standard je istoveten z:EN 10230-1:1999SIST EN 10230-1:2000en01-november-2000SIST EN 10230-1:2000SLOVENSKI
STANDARD
SIST EN 10230
...
SIST EN 10230-1:2000 문서는 일반적인 응용을 위한 느슨한 강철 와이어 못에 대한 유럽 표준을 규정하고 있습니다. 이 표준은 강철 와이어 못의 선호하는 형태와 치수, 치수에 대한 공차, 표면 코팅에 대한 요구 사항을 명확히 명시하고 있어, 사용자가 제품의 품질을 보장받을 수 있도록 돕습니다. 이 표준의 주요 강점은 제품의 치수와 형태에 대한 명확한 가이드라인을 제공하여, 제조사와 소비자 모두가 일관된 품질의 제품을 기대할 수 있게 한다는 점입니다. 또한, 표면 코팅에 대한 명세는 강철 와이어 못의 내구성과 부식 저항성을 향상시키는데 기여하여, 다양한 환경에서의 사용에 적합하다는 점을 부각시킵니다. SIST EN 10230-1:2000은 일반적인 응용을 위한 느슨한 강철 와이어 못에 대한 표준으로서, 건설 및 제조 산업에서 널리 활용될 수 있는 중요한 문서입니다. 이 표준은 제품의 특정 치수와 형태에 대한 일관성을 요구하므로, 효과적인 생산 및 품질 보증을 위한 필수적인 요건을 충족합니다. 이는 특히 소비자 보호와 산업 안전성을 높이기 위한 중요한 기반을 마련합니다. 종합적으로, SIST EN 10230-1:2000 표준은 강철 와이어 못의 품질과 일관성을 확보하고, 다양한 산업 분야에서의 적용 가능성을 넓히는 등 중요한 역할을 담당하고 있습니다.
EN 10230-1:1999は、一般的な用途向けの鋼線釘に関する欧州標準であり、標準的な形状、寸法、寸法および表面コーティングの公差についての要件を明確に定めています。この標準の適用範囲は、ルース釘と呼ばれる鋼線釘全般に及び、様々な建築および製造業において幅広く利用されることを目的としています。 この文書の強みは、鋼線釘の製造者、販売者、およびユーザーにとっての具体的なガイドラインを提供している点です。尺度としての信頼性が高く、高品質な鋼線釘の流通と使用を促進するための基準を設けています。特に、寸法の公差や表面コーティングの要件に関する厳密な規定は、製品の一貫性と品質を確保するための助けになります。 また、この標準は、国際的な取引や製品の互換性において重要な役割を果たし、鋼線釘に関するリーダビリティを向上させ、適切な基準に基づく製品選定を助けるため、特に製造業者や建設業者にとって関連性の高い文書です。そのため、EN 10230-1:1999は鋼線釘の業界標準としての地位を確立しており、今後の発展に寄与することが期待されます。
The EN 10230-1:1999 standard provides comprehensive guidelines for loose steel wire nails used in general applications, focusing on critical specifications including preferred form, dimensions, tolerances, and surface coatings. The document establishes clear requirements that enhance quality and consistency across the manufacturing process, ensuring that products meet safety and performance expectations. One of the key strengths of this standard is its detailed specification on dimensions and tolerances, which promotes uniformity and reliability in the production of steel wire nails. This is particularly relevant for manufacturers aiming to conform to industry benchmarks, as adherence to these specifications can lead to improved end-user satisfaction and reduced risk of failures in application. Furthermore, EN 10230-1:1999 underscores the importance of surface coatings, addressing the need for durability and corrosion resistance. The inclusion of such performance criteria not only extends the lifespan of the nails but also ensures compatibility with various environmental conditions. This aspect of the standard is especially pertinent for applications in construction and carpentry, where material integrity is vital. In summary, SIST EN 10230-1:2000 serves as a pivotal standard for producers and users of loose steel wire nails by firmly outlining the essential parameters that govern quality and application suitability. Its focus on consistent dimensions, tolerances, and surface quality establishes a framework that is both practical and relevant to various sectors within the construction industry.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...