EN ISO 16120-3:2011

Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)

ISO 16120-3:2011 is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling.

Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 3: Besondere Anforderungen an Walzdraht aus unberuhigtem und ersatzunberuhigtem Stahl mit niedrigem Kohlenstoffgehalt (ISO 16120-3:2011)

Dieser Teil der ISO 16120 gilt für Walzdraht aus unberuhigtem und ersatzunberuhigtem Stahl mit niedrigen
Gehalten an Kohlenstoff und Silizium und mit hoher Verformbarkeit zum Ziehen und/oder Kaltwalzen.

Fil-machine en acier non allié destiné à la fabrication de fils - Partie 3: Exigences spécifiques au fil-machine en acier effervescent ou pseudo-effervescent à bas carbone (ISO 16120-3:2011)

L'ISO 16120-3:2011 est applicable au fil-machine en acier effervescent ou pseudo-effervescent à bas carbone et bas silicium, avec une ductilité élevée destiné au tréfilage et/ou au laminage à froid.

Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 3. del: Posebne zahteve za žico iz nepomirjenega in nepomirjenemu jeklu nadomestnega maloogljičnega jekla (ISO 16120-3:2011)

Ta evropski standard velja za žico iz nepomirjenega in nepomirjenemu jeklu nadomestnega maloogljičnega, malosilikonskega jekla z visoko preoblikovalnostjo za vlečenje in/ali hladno valjanje.

General Information

• Status: Published
• Publication Date: 30-Jun-2011
• Withdrawal Date: 30-Jan-2012
• ICS: 77.140.60 - Steel bars and rods
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 106 - Wire rod and wires
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2011
• Completion Date: 01-Jul-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 16120-3:2011 - Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)

Relations

• Replaces: EN 10016-3:1994 - Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DGRPHVWQHJDWalzdraht aus unlegiertem Stahl zum Ziehen - Teil 3: Besondere Anforderungen an Walzdraht aus unberuhigtem und ersatzunberuhigtem Stahl mit niedrigem Kohlenstoffgehalt (ISO 16120-3:2011)Fil-machine en acier non allié destiné à la fabrication de fils - Partie 3: Exigences spécifiques au fil-machine en acier effervescent ou pseudo-effervescent à bas carbone (ISO 16120-3:2011)Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN ISO 16120-3:2011SIST EN ISO 16120-3:2011en,fr,de01-november-2011SIST EN ISO 16120-3:2011SLOVENSKI
STANDARDSIST EN 10016-3:19971DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 16120-3
July 2011 ICS 77.140.60 Supersedes EN 10016-3:1994English Version
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 3: Exigences spécifiques au fil-machine en acier effervescent ou pseudo-effervescent à bas carbone (ISO 16120-3:2011)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 3: Besondere Anforderungen an Walzdraht aus unberuhigtem und ersatzunberuhigtem Stahl mit niedrigem Kohlenstoffgehalt (ISO 16120-3:2011) This European Standard was approved by CEN on 30 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16120-3:2011: ESIST EN ISO 16120-3:2011

Reference numberISO 16120-3:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO16120-3Second edition2011-07-01Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod Fil-machine en acier non allié destiné à la fabrication de fils — Partie 3: Exigences spécifiques au fil-machine en acier effervescent ou pseudo-effervescent à bas carbone
ISO 16120-3:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 16120-3:2011(E) © ISO 2011 – All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Designation.2 5 Requirements.2 5.1 General.2 5.2 Chemical composition.2 5.3 Internal soundness and surface quality.3 5.4 Depth of surface discontinuities.3 5.5 Non-metallic inclusions.3 5.6 Tensile strength.3 5.7 Scale characteristics.4 5.8 Mechanical damage.4 Annex A (informative)
Steel designations in accordance with ISO 16120-3 and designation of comparable steel grades in national or regional standards.5 Bibliography.6
ISO 16120-3:2011(E) iv © ISO 2011 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, i
...