Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017)

ISO 16120-2:2017 is applicable to general purpose steel wire rod for drawing and/or cold rolling.

Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2: Besondere Anforderungen an Walzdraht für allgemeine Verwendung (ISO 16120-2:2017)

Dieser Teil der ISO 16120 gilt für Walzdraht für allgemeine Verwendung zum Ziehen und/oder Kaltwalzen.

Fil-machine en acier non allié destiné à la fabrication de fils - Partie 2: Exigences spécifiques au fil-machine d'usage général (ISO 16120-2:2017)

ISO 16120-2:2017 est applicable au fil-machine en acier d'usage général destiné au tréfilage et/ou au laminage à froid.

Valjana žica iz nelegiranega jekla - 2. del: Posebne zahteve za žico za splošno uporabo (ISO 16120-2:2017)

Ta dokument se uporablja za jeklene žice za splošno uporabo za vlečenje in/ali hladno valjanje.

General Information

Status
Published
Publication Date
21-Feb-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
22-Feb-2017
Completion Date
22-Feb-2017

RELATIONS

Buy Standard

Standard
EN ISO 16120-2:2017
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 16120-2:2017
01-maj-2017
1DGRPHãþD
SIST EN ISO 16120-2:2011
Valjana žica iz nelegiranega jekla - 2. del: Posebne zahteve za žico za splošno
uporabo (ISO 16120-2:2017)

Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-

purpose wire rod (ISO 16120-2:2017)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2: Besondere Anforderungen an
Walzdraht für allgemeine Verwendung (ISO 16120-2:2017)

Fil-machine en acier non allié destiné à la fabrication de fils - Partie 2: Exigences

spécifiques au fil-machine d'usage général (ISO 16120-2:2017)
Ta slovenski standard je istoveten z: EN ISO 16120-2:2017
ICS:
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN ISO 16120-2:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16120-2:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 16120-2:2017
EN ISO 16120-2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 77.140.60 Supersedes EN ISO 16120-2:2011
English Version
Non-alloy steel wire rod for conversion to wire - Part 2:
Specific requirements for general purpose wire rod (ISO
16120-2:2017)

Fil-machine en acier non allié destiné à la fabrication Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2:

de fils - Partie 2: Exigences spécifiques au fil-machine Besondere Anforderungen an Walzdraht für

d'usage général (ISO 16120-2:2017) allgemeine Verwendung (ISO 16120-2:2017)
This European Standard was approved by CEN on 15 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16120-2:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16120-2:2017
EN ISO 16120-2:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 16120-2:2017
EN ISO 16120-2:2017 (E)
European foreword

This document (EN ISO 16120-2:2017) has been prepared by Technical Committee ISO/TC 17 “Steel” in

collaboration with Technical Committee ECISS/TC 106 “Wire rod and wires” the secretariat of which is

held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall

be withdrawn at the latest by August 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes EN ISO 16120-2:2011.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 16120-2:2017 has been approved by CEN as EN ISO 16120-2:2017 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 16120-2:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 16120-2:2017
INTERNATIONAL ISO
STANDARD 16120-2
Third edition
2017-02
Non-alloy steel wire rod for
conversion to wire —
Part 2:
Specific requirements for general
purpose wire rod
Fil-machine en acier non allié destiné à la fabrication de fils —
Partie 2: Exigences spécifiques au fil-machine d’usage général
Reference number
ISO 16120-2:2017(E)
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 16120-2:2017
ISO 16120-2:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16120-2:2017
ISO 16120-2:2017(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Designation ................................................................................................................................................................................................................ 1

5 Requirements .......................................................................................................................................................................................................... 2

5.1 General ........................................................................................................................................................................................................... 2

5.2 Chemical composition ...................................................................................................................................................................... 2

5.3 Internal soundness and surface quality ............................................................................................................................ 4

5.4 Depth of surface discontinuities .............................................................................................................................................. 4

5.5 Core segregation .................................................................................................................................................................................... 4

5.6 Tensile strength ...................................................................................................................................................................................... 4

5.7 Scale characteristics ........................................................................................................................................................................... 5

5.8 Mechanical damage ............................................................................................................................................................................. 5

Annex A (informative) Steel designations and designation of comparable steel grades ...............................6

Bibliography ................................................................................................................................................................................................................................ 8

© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16120-2:2017
ISO 16120-2:2017(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,

as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the

Technical Barriers to Trade (TBT) see the following URL: www . i so .org/ iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 17, Steel wire

rod and wire products.

This third edition cancels and replaces the second edition (ISO 16120-2:2011), which has been

technically revised.
A list of all parts in the ISO 16120 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16120-2:2017
INTERNATIONAL STANDARD ISO 16120-2:2017(E)
Non-alloy steel wire rod for conversion to wire —
Part 2:
Specific requirements for general purpose wire rod
1 Scope

This document is applicable to general purpose steel wire rod for drawing and/or cold rolling.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 4948-2, Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main

quality classes and main property or application characteristics

ISO 16120-1:—, Non-alloy steel wire rod for conversion to wire — Part 1: General requirements

3 Terms and definitions
No terms and definitions are listed in this document.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at http:// www .iso .org/ obp
4 Designation

In the designation C##D, “C” means non-alloy steel (see ISO/TS 4949); ## is the indicative average

content of carbon; “D” signifies that it is for wire-drawing.

If steels are ordered according to chemical composition, ## indicates the values to be inserted by the

purchaser according to the steel names designated in Table 1, first column.
The designati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.