EN 12881-1:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, are measured by observing the extent to which the fire spreads along the test piece.
Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of (1,30 ± 0,05) kg per 10 min.
Method B uses a test piece 2,5 m in length and consumes propane gas through two burners mounted above and below the test piece trestle at the rate of (1,30 ± 0,05) kg per 10 min for each burner.
Method C uses a test piece 1,5 m in length and consumes propane gas through the burner at the rate of (565 ± 10) g per 50 min.

Fördergurte - Brandtechnische Prüfungen - Teil 1: Prüfungen mit dem Propanbrenner

Dieser Teil der EN 12881 legt drei Verfahren zur Bestimmung der Ausbreitung einer Flamme entlang eines Fördergurtes fest, der einer örtlichen Wärmequelle, wie Feuer, ausgesetzt war. Es wird sowohl die Beschädigung des Fördergurtes gemessen als auch seine Neigung, die Verbrennung zu unterstützen, wobei das Fortschreiten der Flamme entlang des Probekörpers beobachtet wird.
Für Verfahren A wird ein 2 m langer Probekörper verwendet, wobei der Propangasverbrauch des Brenners (1,30  0,05) kg in 10 min beträgt.
Für Verfahren B wird ein 2,5 m langer Probekörper verwendet, wobei der Propangasverbrauch von zwei Brennern, die über und unter dem Gestell mit dem Probekörper montiert sind, (1,30  0,05) kg in 10 min für jeden Brenner beträgt.
Für Verfahren C wird ein 1,5 m langer Probekörper verwendet, wobei der Propangasverbrauch des Brenners  (565  10) g in 50 min beträgt.

Courroies transporteuses - Essais de simulation d'inflammation - Partie 1: Essais avec brûleur propane

La présente partie de l’EN 12881 décrit trois méthodes de mesurage de la propagation d’une flamme sur une courroie transporteuse qui a été exposée à une source de chaleur localisée relativement élevée, comme par exemple un feu. On mesure la détérioration de la courroie transporteuse, ainsi que sa tendance à entretenir la combustion, en observant le degré de propagation du feu sur l’éprouvette. La méthode A utilise une éprouvette de 2 m de long et consomme du gaz propane à l’aide d’un brûleur, à raison de (1,30 ± 0,05) kg par 10 min. La méthode B utilise une éprouvette de 2,5 m de long et consomme du gaz propane à l’aide de deux brûleurs installés au-dessus et au-dessous du support d’éprouvette à raison de (1,30 ± 0,05) kg par 10 min pour chaque brûleur. La méthode C utilise une éprouvette de 1,5 m de long et consomme du gaz propane à l’aide d’un brûleur, à raison de (565 ± 10) g par 50 min.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Požarnovarnostni preskusi - 1. del: Preskusi s propanskim gorilnikom

General Information

• Status: Withdrawn
• Publication Date: 08-Apr-2008
• Withdrawal Date: 13-May-2014
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 3 - Safety requirements for conveyor belting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-May-2014
• Completion Date: 14-May-2014
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12881-1:2006+A1:2008 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

Relations

• Merged From: EN 12881-1:2005 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
• Effective Date: 22-Dec-2008
• Replaced By: EN 12881-1:2014 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner testsNRPCourroies transporteuses - Essais de simulation d'inflammation - Partie 1: Essais avec brûleur propaneFördergurte - Brandtechnische Prüfungen - Teil 1: Prüfungen mit dem Propanbrenner53.040.20Deli za transporterjeComponents for conveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:SIST EN 12881-1:2006+A1:2008en,frTa slovenski standard je istoveten z:EN 12881-1:2005+A1:200801-julij-2008SIST EN 12881-1:2006+A1:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12881-1:2005+A1
April 2008 ICS 13.220.40; 53.040.20 Supersedes EN 12881-1:2005 English Version
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
Courroies transporteuses - Essais de simulation d'inflammation - Partie 1: Essais avec brûleur propane
Fördergurte - Brandtechnische Prüfungen - Teil 1: Prüfungen mit dem Propanbrenner This European Standard was approved by CEN on 26 August 2005 and includes Amendment 1 approved by CEN on 21 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12881-1:2005+A1:2008: E



EN 12881-1:2005+A1:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Propane gas supply.5 4 Method A – Two metre single burner test.6 4.1 Apparatus.6 4.2 Preparation of test pieces.9 4.3 Temperature at commencement of test.9 4.4 Number of tests.9 4.5 Procedure.10 4.6 Termination of tests.10 4.7 Measurement of damage to test pieces.10 4.8 Test report.11 5 Method B – Double burner test.12 5.1 Apparatus.
...