3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010)

ISO 20685:2010 addresses protocols for the use of 3-D surface-scanning systems in the acquisition of human body shape data and measurements defined in ISO 7250-1 that can be extracted from 3-D scans. It does not apply to instruments that measure the location and/or motion of individual landmarks.
While mainly concerned with whole-body scanners, it is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners).
The intended audience is those who use 3-D scanners to create 1-D anthropometric databases and the users of 1-D anthropometric data from 3-D scanners. Although not necessarily aimed at the designers and manufacturers of those systems, scanner designers and manufacturers will find it useful in meeting the needs of clients who build and use 1‑D anthropometric databases.

3-D-Scanverfahren für international kompatible anthropometrische Datenbanken (ISO 20685:2010)

Diese Internationale Norm legt Verfahren für die Anwendung von 3D-Oberflächenscansystemen für die
Gewinnung von Daten zur Form des menschlichen Körpers und für in ISO 7250-1 festgelegte Messungen
fest, die aus 3D-Scans gewonnen werden können. Sie ist nicht auf Geräte anwendbar, die den Ort und/oder
die Bewegung einzelner Messpunkte messen.
Obwohl die Internationale Norm überwiegend auf Ganzkörperscanner bezogen ist, ist sie auch auf
Körperteilscanner (Kopfscanner, Handscanner, Fußscanner) anwendbar.
Die Norm richtet sich an diejenigen, die 3D-Scanner zur Erstellung von anthropometrischen 1D-Datenbanken
nutzen, und an die Nutzer von anthropemetrischen 1D-Daten, die durch 3D-Scanner gewonnen wurden.
Obwohl dies nicht notwendigerweise die Personen sind, die die Systeme konstruieren und herstellen, werden
Konstrukteure und Hersteller von Scannern diese nützlich finden, um die Bedürfnisse ihrer Kunden zu
erfüllen, die anthropometrische 1D-Datenbanken erstellen und anwenden.

Méthodologies d'exploration tridimensionnelles pour les bases de données anthropométriques compatibles au plan international (ISO 20685:2010)

L'ISO 20685:2010 concerne les protocoles d'utilisation des systèmes d'exploration à l'aide de scanners 3D de surface permettant de collecter des données sur la forme du corps humain et les mesurages définis dans l'ISO 7250, que l'on peut obtenir à partir de scanners 3D. Elle ne s'applique pas aux instruments qui mesurent l'emplacement et/ou le déplacement de repères individuels.
La majeure partie de l'ISO 20685:2010 concerne les scanners pour le corps entier, mais elle s'applique également aux scanners limités à une partie du corps (scanners pour la tête, scanners pour la main, scanners pour le pied).
L'ISO 20685:2010 s'adresse aux utilisateurs des scanners 3D pour créer des bases de données anthropométriques 1D, et aux utilisateurs de données anthropométriques 1D issues de scanners 3D. Elle ne s'adresse pas nécessairement aux concepteurs et fabricants des systèmes, cependant, les concepteurs et fabricants de scanners apprécieront son utilité si elle satisfait aux besoins de leurs clients qui élaborent et utilisent des bases de données anthropométriques 1D.

Postopki 3D-skeniranja za mednarodno združljive baze antropometrijskih podatkov (ISO 20685:2010)

Ta mednarodni standard naslavlja protokole za uporabo 3-D sistemov za skeniranje površine za pridobitev oblike človeškega telesa in meritev določenih v ISO 7250-1, ki so lahko povzete iz 3-D skenov. Ne velja za inštrumente, ki merijo lokacijo in/ali gibanje posameznih orientacijskih oznak. Medtem ko ta standard zlasti zadeva skenerje za celo telo, prav tako velja za skenerje za dele telesa (skenerji glave, skenerji rok, skenerji nog). Namenjeno občinstvo je tisto, ki uporablja 3-D skenerje za izdelavo 1-D antropometričnih podatkovni baz in uporabnike 1-D antropometričnih podatkov iz 3-D skenerjev. Čeprav ni nujno usmerjen v načrtovalce in proizvajalce teh sistemov, ga bojo načrtovalci skenerjev in proizvajalci imeli za koristnega pri zagotovitvi potreb klientov, ki gradijo in uporabljajo antropometrične podatkovne baze.

General Information

Status
Withdrawn
Publication Date
14-Jun-2010
Withdrawal Date
11-Dec-2018
Technical Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Dec-2018

Relations

Buy Standard

Standard
EN ISO 20685:2010
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20685:2010
01-december-2010
1DGRPHãþD
SIST EN ISO 20685:2006
Postopki 3D-skeniranja za mednarodno združljive baze antropometrijskih
podatkov (ISO 20685:2010)
3-D scanning methodologies for internationally compatible anthropometric databases
(ISO 20685:2010)
3-D-Scanverfahren für international kompatible anthropometrische Datenbanken (ISO
20685:2010)
Méthodologies d'exploration tridimensionnelles pour les bases de données
anthropométriques compatibles au plan international (ISO 20685:2010)
Ta slovenski standard je istoveten z: EN ISO 20685:2010
ICS:
13.180 Ergonomija Ergonomics
SIST EN ISO 20685:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20685:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 20685:2010


EUROPEAN STANDARD
EN ISO 20685

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2010
ICS 13.180 Supersedes EN ISO 20685:2005
English Version
3-D scanning methodologies for internationally compatible
anthropometric databases (ISO 20685:2010)
Méthodologies d'exploration tridimensionnelles pour les 3-D-Scanverfahren für international kompatible
bases de données anthropométriques compatibles au plan anthropometrische Datenbanken (ISO 20685:2010)
international (ISO 20685:2010)
This European Standard was approved by CEN on 12 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20685:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20685:2010
EN ISO 20685:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20685:2010
EN ISO 20685:2010 (E)
Foreword
This document (EN ISO 20685:2010) has been prepared by Technical Committee ISO/TC 159 "Ergonomics"
in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn
at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20685:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 20685:2010 has been approved by CEN as a EN ISO 20685:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 20685:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 20685:2010

INTERNATIONAL ISO
STANDARD 20685
Second edition
2010-06-15


3-D scanning methodologies for
internationally compatible
anthropometric databases
Méthodologies d'exploration tridimensionnelles pour les bases de
données anthropométriques compatibles au plan international

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.