Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test

This document specifies a quantitative method for the measurement of adhesive strength of metallic and other inorganic coatings applied to metallic, polymer and glass substrates.
Typical coatings for which this document applies are metallic coatings such as aluminium, copper, nickel, nickel plus chromium, silver, tin, tin-nickel alloys, zinc, gold as well as other inorganic coatings such as oxides or nitrides, e.g. of aluminium, indium and indium-tin, silicon, niobium, titanium, tungsten, zirconium and others.
This document does not apply to certain hot dip, spray and mechanical coatings, for which other standards may apply, e.g. EN ISO 14916 or EN ISO 4624.
The measurement is valid if the cohesion and adhesion properties of the adhesive are higher than those of the coating subjected to test.

Metallische und andere anorganische Überzüge - Verfahren zur quantitativen Messung der Haftfestigkeit durch den Zugversuch

Dieses Dokument legt ein quantitatives Verfahren zur Messung der Haftfestigkeit metallischer und anderer anorganischer Überzüge fest, die auf metallische, Polymer- und Glas Grundwerkstoffe aufgebracht wurden.
Typische Überzüge, für die dieses Dokument gilt, sind metallische Überzüge, z. B. aus Aluminium, Kupfer, Nickel, Chrom Nickel, Silber, Zinn, Zinn Nickel Legierungen, Zink, Gold und andere anorganische Überzüge, z. B. aus Oxiden oder Nitriden der Elemente Aluminium, Indium und Indium Zinn, Silicium, Niob, Titan, Wolfram, Zirkon und anderen.
Dieses Dokument gilt nicht für bestimmte Schmelztauchüberzüge, aufgespritzte und mechanische Überzüge, für welche andere Normen wie z. B. EN ISO 14916 oder EN ISO 4624 angewendet werden dürfen.
Diese Messung ist gültig, wenn die Kohäsions- und Adhäsionseigenschaften des Klebstoffes größer als die des zu prüfenden Überzuges sind.

Revêtements métalliques et autres revêtements inorganiques - Méthode de mesurage quantitatif de l'adhérence par essai de traction

Le présent document spécifie une méthode quantitative de mesurage de la résistance d’adhérence des revêtements métalliques et autres revêtements inorganiques appliqués sur des substrats métalliques, en polymères ou en verre.
Les revêtements types auxquels le présent document s’applique sont les revêtements métalliques, tels que l’aluminium, le cuivre, le nickel, le nickel-chrome, l’argent, l’étain, les alliages étain-nickel, le zinc et l’or, ainsi que les autres revêtements inorganiques, tels que les oxydes ou les nitrures par exemple d’aluminium, indium et indium-étain, silicium, niobium, titane, tungstène, zirconium et autres.
Le présent document ne s’applique pas à certains revêtements obtenus par immersion à chaud, par pulvérisation ou par voie mécanique, pour lesquels d’autres normes telles que l’EN ISO 14916 ou l’EN ISO 4624 peuvent s’appliquer.
Le mesurage est valable si les propriétés de cohésion et d’adhérence de l’adhésif sont supérieures à celles du revêtement soumis à l’essai.

Kovinske in druge anorganske prevleke - Metoda za kvantitativno merjenje adhezije z nateznim preskusom

Ta evropski standard določa kvantitativno metodo za merjenje adhezije kovinskih in drugih anorganskih prevlek na kovinskih površinah.  Običajne prevleke, za katere se uporablja ta evropski standard, so baker, nikelj, nikelj-krom, srebro, kositer, zlitine kositer-nikelj, cink, zlato.  Ta evropski standard se ne uporablja za nekatere vroče prevleke in prevleke, nanesene z brizganjem.

General Information

Status
Published
Publication Date
27-Nov-2018
Withdrawal Date
30-May-2019
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jan-2024
Completion Date
15-Jan-2024

Relations

Buy Standard

Standard
EN 13144:2019
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13144:2017
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13144:2019
01-januar-2019
1DGRPHãþD
SIST EN 13144:2003
Kovinske in druge anorganske prevleke - Metoda za kvantitativno merjenje
adhezije z nateznim preskusom
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion
by tensile test
Metallische und andere anorganische Überzüge - Verfahren zur quantitativen Messung
der Haftfestigkeit durch den Zugversuch
Revêtements métalliques et autres revêtements inorganiques - Méthode de mesurage
quantitatif de l'adhérence par essai de traction
Ta slovenski standard je istoveten z: EN 13144:2018
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN 13144:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13144:2019

---------------------- Page: 2 ----------------------

SIST EN 13144:2019


EN 13144
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2018
EUROPÄISCHE NORM
ICS 25.220.40; 25.220.99 Supersedes EN 13144:2003
English Version

Metallic and other inorganic coatings - Method for
quantitative measurement of adhesion by tensile test
Revêtements métalliques et autres revêtements Metallische und andere anorganische Überzüge -
inorganiques - Méthode de mesurage quantitatif de Verfahren zur quantitativen Messung der Haftfestigkeit
l'adhérence par essai de traction durch den Zugversuch
This European Standard was approved by CEN on 28 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13144:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13144:2019
EN 13144:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Determination of adhesive strength by measurement. 5
4.1 Principle . 5
4.2 Testing devices . 5
4.3 Adherend preparation . 8
4.4 Adhesives and their application . 8
4.5 Test assemblies . 9
4.6 Measurement . 11
5 Expression of results .
...

SLOVENSKI STANDARD
oSIST prEN 13144:2017
01-junij-2017
Kovinske in druge anorganske prevleke - Metoda za kvantitativno merjenje
adhezije z nateznim preskusom
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion
by tensile test
Metallische und andere anorganische Überzüge - Verfahren zur quantitativen Messung
der Haftfestigkeit durch den Zugversuch
Revêtements métalliques et autres revêtements inorganiques - Méthode de mesurage
quantitatif de l'adhérence par essai de traction
Ta slovenski standard je istoveten z: prEN 13144
ICS:
25.220.40 Kovinske prevleke Metallic coatings
oSIST prEN 13144:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13144:2017

---------------------- Page: 2 ----------------------
oSIST prEN 13144:2017


DRAFT
EUROPEAN STANDARD
prEN 13144
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2017
ICS 25.220.40; 25.220.99 Will supersede EN 13144:2003
English Version

Metallic and other inorganic coatings - Method for
quantitative measurement of adhesion by tensile test
Revêtements métalliques et autres revêtements Metallische und andere anorganische Überzüge -
inorganiques - Méthode de mesurage de l'adhérence Verfahren zur quantitativen Messung der Haftfestigkeit
par essai de traction durch den Zugversuch
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 262.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13144:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13144:2017
prEN 13144:2017 (E)
Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Determination of adhesive strength by measurement. 5
4.1 Principle . 5
4.2 Testing devices . 5
4.2.1 Tensile testing machine . 5
4.2.2 Centrifuge . 7
4.3 Adherend preparation . 8
4.4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.