EN ISO 16348:2003

Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)

ISO 16348:2003 specifies appearance and its associated terms and outlines the principles involved in validating appearance when it is specified as a requirement of metallic and other inorganic coatings.

Metallishe und andere anorganische Überzüge - Definitionen und Festlegungen, die das Aussehen betreffen (ISO 16348:2003)

Diese Europäische Norm legt das Aussehen und deren zugehörende Begriffe fest und beschreibt die Prinzipien, die für das Aussehen gelten sollen, wenn das Aussehen von metallischen und verwandten anorganischen Schichten festgelegt wird.

Revêtements métalliques et autres revêtements inorganiques - Définitions et principes concernant l'apparence (ISO 16348:2003)

L'ISO 16348:2003 définit l'apparence et ses termes associés ainsi que les grandes lignes des principes afférents à la validation de l'apparence lorsque celle-ci est spécifiée comme une exigence des revêtements métalliques et autres revêtements inorganiques.

Kovinske in druge anorganske prevleke - Definicije in dogovori v zvezi z videzom (ISO 16348:2003)

General Information

• Status: Published
• Publication Date: 14-May-2003
• Withdrawal Date: 29-Nov-2003
• ICS: 01.040.25 - Manufacturing engineering (Vocabularies)
• ICS: 25.220.40 - Metallic coatings
• ICS: 25.220.99 - Other treatments and coatings
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 1 - Test methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 15-May-2008
• Completion Date: 15-May-2008
• Ref Project: SIST EN ISO 16348:2003 - Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16348:2003
01-december-2003
Kovinske in druge anorganske prevleke - Definicije in dogovori v zvezi z videzom
(ISO 16348:2003)
Metallic and other inorganic coatings - Definitions and conventions concerning
appearance (ISO 16348:2003)
Metallishe und andere anorganische Überzüge - Definitionen und Festlegungen, die das
Aussehen betreffen (ISO 16348:2003)
Revetements métalliques et autres revetements inorganiques - Définitions et principes
concernant l'apparence (ISO 16348:2003)
Ta slovenski standard je istoveten z: EN ISO 16348:2003
ICS:
25.220.20 Površinska obdelava Surface treatment
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 16348:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16348:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 16348:2003
EUROPEAN STANDARD
EN ISO 16348
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 01.040.25; 25.220.40; 25.220.99
English version
Metallic and other inorganic coatings - Definitions and
conventions concerning appearance (ISO 16348:2003)
Revêtements métalliques et autres revêtements Metallishe und andere anorganische Überzüge -
inorganiques - Définitions et principes concernant Definitionen und Festlegungen, die das Aussehen betreffen
l'apparence (ISO 16348:2003) (ISO 16348:2003)
This European Standard was approved by CEN on 18 December 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16348:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16348:2003
EN ISO 16348:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Terms and definitions.4
3 Principle.4
4 Representative approved reference samples .4
5 Inspection conditions.5
6 Test report .5
Bibliography .6
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16348:2003
EN ISO 16348:2003 (E)
Foreword
This document (EN ISO 16348:2003) has been prepared by Technical Committee CEN/TC 262 "Metallic and other
inorganic coatings", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 107
"Metallic and other inorganic coatings".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latest
by November 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
Fran
...