EN ISO 10365:1995
(Main)Adhesives - Designation of main failure patterns (ISO 10365:1992)
Adhesives - Designation of main failure patterns (ISO 10365:1992)
Specifies the designations and illustrates, through diagrams, their respective appearances. It applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the assembly.
Klebstoffe - Bezeichnung der wichtigsten Bruchbilder (ISO 10365:1992)
Diese Internationale Norm beschreibt die Bezeichnungen der wichtigsten Bruchbildarten von geklebten Verbindungen und veranschaulicht durch Abbildungen ihr verschiedenes Aussehen. Sie ist anwendbar bei allen mechanischen Prüfungen von Klebungen, ungeachtet der Natur der Fügeteile und des Klebstoffes, die zur Herstellung der Klebung verwendet wurden.
Adhésifs - Désignation des principaux facies de rupture (ISO 10365:1992)
La présente Norme internationale décrit la désignation des principaux types de ruptures des assemblages collés et illustre, à l'aide de schémas, les faciès respectifs. Elle est applicable à tous les types d'essais mécaniques qui sont effectués sur un assemblage collé quelle que soit la nature des supports et de l'adhésif constituant l'assemblage.
Lepila - Označevanje glavnih načinov porušitev (ISO 10365:1992)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe - Bezeichnung der wichtigsten Bruchbilder (ISO 10365:1992)Adhésifs - Désignation des principaux facies de rupture (ISO 10365:1992)Adhesives - Designation of main failure patterns (ISO 10365:1992)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN ISO 10365:1995SIST EN ISO 10365:1998en01-februar-1998SIST EN ISO 10365:1998SLOVENSKI
STANDARD
INTERNATIONAL STANDARD 10365 First edition 1992-12-15 Adhesives - Designation of main failure Patterns Adhbsifs - Designation des principaux fach de rupture ------- --_-- ---- -- -_ ~-- ---_- ------ ----_ ----. -_-. _-. _-_ Reference number ISO 10365: 1992(E) SIST EN ISO 10365:1998
ISO 10365:1992(E) , Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 10365 was prepared by Technical Committee ISO/TC 61, Plastics, Sub-Committee SC 11, Products. 0 ISO 1992 All rights reserved. No part of this publication may be reproduced or utilized in any fort-n or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 10365:1998
INTERNATIONAL STANDARD ISO 10365:1992(E) Adhesives - Designation of main failure Patterns 1 Scope This International Standard specifies the desig- nations for the main types of failure Pattern of bonded assemblies and illustrates, through dia- grams, their respective appearances. lt applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the as- sem bly. 2 Normative reference The following Standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the edition indicated was valid. All Standards are subject to revision, and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.