iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 2922:2000

(Main)

Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)

Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): SPD : correct at publication the formula p4 (3.5) - parenthesis missing.

Akustik - Messung des von Wasserfahrzeugen auf Binnengewässern und in Häfen abgestrahlten Luftschalls (ISO 2922:2000)

Diese Internationale Norm legt die Bedingungen für reproduzierbare und vergleichbare Messungen des Pegels des von Wasserfahrzeugen aller Art, außer motorgetriebenen Sportbooten nach ISO 14509, auf Binnengewässern und in Binnen- und Seehäfen abgestrahlten Luftschalls fest. Diese Internationale Norm kann auf kleine seetüchtige Wasserfahrzeuge, in Häfen betriebene asserfahrzeuge, Schwimmbagger und all jene Wasserfahrzeuge, einschließlich solcher ohne Verdrängungsfahrt, angewandt werden, die als Transportmittel auf dem Wasser eingesetzt werden oder dazu verwendet werden können.

Acoustique - Mesurage du bruit aérien émis par les bateaux de navigation intérieure et portuaire (ISO 2922:2000)

La présente Norme internationale spécifie les conditions d'obtention de résultats de mesurage reproductibles et comparables du bruit aérien émis par les bâteaux de tous types sur les voies de navigation intérieure et portuaire, excepté par les navires de plaisance motorisés tels que spécifiés dans l'ISO 14509. La présente Norme internationale est applicable aux petits navires de mer, aux bateaux de service, aux dragueurs et à tous les bateaux y compris les bateaux à l'amarrage, utilisés ou pouvant être utilisés comme moyens de transport sur l'eau.

Akustika - Merjenje zvoka plovil v zraku na kopenskih vodnih poteh in v pristaniščih (ISO 2922:2000)

Določa pogoje za pridobivanje ponovljivih in primerljivih rezultatov meritev hrupa, ki ga oddajajo plovila na različnih kopenskih vodnih poteh ter v lukah in pristaniščih. Ta standard se lahko uporablja tudi za majhna morska plovila, plovila v pristanišču, plovne bagre in vsa vodna plovila z največjo širino 7 m, vključno z neizpodrivnimi plovili, ki se uporabljajo kot sredstvo za prevoz po vodi ali so primerna za tako uporabo.

General Information

Status
Withdrawn
Publication Date
31-Oct-2000
Withdrawal Date
22-Dec-2020
ICS
17.140.30 - Noise emitted by means of transport
Technical Committee
CEN/TC 211 - Acuostics
Drafting Committee
CEN/TC 211 - Acuostics
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
23-Dec-2020
Ref Project
SIST EN ISO 2922:2001 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)

Relations

Replaces
EN 22922:1993 - Acoustics - Measurement of noise emitted by vessels on inland water-ways and harbours (ISO 2922:1975)
Effective Date
22-Dec-2008
Replaced By
EN ISO 2922:2020 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
Effective Date
21-Jun-2017
Amended By
EN ISO 2922:2000/A1:2013 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours - Amendment 1 (ISO 2922:2000/Amd 1:2013)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 2922:2001EN ISO 2922:2001
PreviousNext
Standard
EN ISO 2922:2001
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2922:2001
01-september-2001
1DGRPHãþD
SIST EN 22922:1999
$NXVWLND0HUMHQMH]YRNDSORYLOY]UDNXQDNRSHQVNLKYRGQLKSRWHKLQY
SULVWDQLãþLK ,62
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and
harbours (ISO 2922:2000)
Akustik - Messung des von Wasserfahrzeugen auf Binnengewässern und in Häfen
abgestrahlten Luftschalls (ISO 2922:2000)
Acoustique - Mesurage du bruit aérien émis par les bateaux de navigation intérieure et
portuaire (ISO 2922:2000)
Ta slovenski standard je istoveten z: EN ISO 2922:2000
ICS:
03.220.40 Vodni transport Transport by water
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
SIST EN ISO 2922:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2922:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 2922:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 2922:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 2922:2001
INTERNATIONAL ISO
STANDARD 2922
Second edition
2000-11-01
Acoustics — Measurement of airborne
sound emitted by vessels on inland
waterways and harbours
Acoustique — Mesurage du bruit aérien émis par les bateaux de navigation
intérieure et portuaire
Reference number
ISO 2922:2000(E)
©
ISO 2000

---------------------- Page: 5 ----------------------

SIST EN ISO 2922:2001
ISO 2922:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 2922:2001
ISO 2922:2000(E)
Contents Page
Foreword.iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Measurement quantities.3
5 Measurement uncertainty .3
6 Measuring equipment.4
6.1 Equipment specifications .4
6.2 Windscreen.4
6.3 Equipment calibration .4
7 Test site specifications and environmental conditions.5
7.1 Test conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2922:2020(Main)
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
SIST EN ISO 2922:2021

This document specifies the conditions for obtaining reproducible and comparable measurement results of the airborne sound emitted by vessels of all kinds, on inland waterways and in ports and harbours, except powered recreational craft as specified in the ISO 14509 series. This document is applicable to sea-going vessels, harbour vessels, dredgers, and all watercraft, including non-displacement craft, used or capable of being used as a means of transport on water. There are no limitations to the application of this document with regard to speed, length and height of vessels, as long as the ship is determined to act like a point source at the reference distance of 25 m.
All noise data obtained in accordance with this document are referred to a reference distance of 25 m.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1501-4:2023(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
SIST EN 1501-4:2023

This document provides all of the information required in order to perform efficiently, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The document ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values.
This document specifies the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501:2021 series.
This document applies to machines which are manufactured after the date of approval of this document by CEN.
Noise emissions of mobile waste and recycling containers are excluded.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11819-1:2023(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
SIST EN ISO 11819-1:2023

This document specifies a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For conditions where traffic is not free flowing, such as at junctions and where the traffic is congested, the method is not applicable.
A standard method for comparing the noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits regarding the use of road surfaces meeting certain noise criteria. However, it is not within the scope of ISO 11819 (all parts) to suggest such criteria.
The statistical pass-by (SPB) method is suitable for use for the following main purposes:
—    to classify road surfaces according to their influence on traffic noise (surface classification);
—    to assist in verifying conformity of production of road surfaces;
—    to evaluate acoustic performance of road surfaces throughout operation relative to new condition;
—    to evaluate the influence of different road surfaces on traffic noise at sites irrespective of condition and service time;
—    to evaluate acoustic performance of a road surface relative to a reference surface.
Due to practical restrictions, the method cannot be applied at all possible locations. However, the backing board method can allow some locations to be tested that were not previously acceptable.
Clause 5 gives a general description of the SPB method.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17495:2022(Main)
Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
SIST EN 17495:2022

This document specifies laboratory test procedures to determine a high-frequency dynamic stiffness, “acoustic stiffness”, of resilient components of rail fastening assemblies.
This document is applicable to complete rail fastening assemblies and to pad components of fastening systems including both discrete and continuous fastening systems.
It is applicable to the measurement of the dynamic transfer stiffness under a prescribed pre-load and the associated hysteretic damping loss factor.
It provides measurement methods and pre-load, excitation and frequency range conditions for application to ground borne and structure borne noise as well as for rolling noise.
It is not applicable to the measurement of the stiffness of pads and fastening assemblies under static or low-frequency dynamic loading used for track mechanics.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17812:2022(Main)
Determination of the acoustic properties of markings - The CPX measurement method
SIST-TS CEN/TS 17812:2022

This document outlines a method to measure the typical external noise emission produced when tyres of passenger car roll over a structured road marking. The result is a measure for the noise perceived in the surroundings of the road, hence not for interior noise in the car.
This method can be used for three purposes:
- determination of initial acoustic properties of a road marking, yielding a noise label for a given system;
- testing of the acoustic conformity of a particular marking to the noise label determined during the determination of initial acoustic properties;
- monitoring of the acoustic properties in the course of its lifetime.
The test result allows the road owner to make an assessment of the risk of nuisance when s/he considers a particular road marking system for application on a road in a noise sensitive area, e.g. built up areas. The method is also applicable to measurements on milled rumble strips.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3381:2021(Main)
Railway applications - Acoustics - Noise measurement inside railbound vehicles (ISO 3381:2021)
SIST EN ISO 3381:2021

This document specifies the measurement method and conditions to obtain reproducible noise levels on-board all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called “unit”, except for track maintenance vehicles in working modes.
This document is applicable to type testing. It does not include all the instructions to carry out monitoring testing or evaluation of noise exposure of passengers or drivers over a whole journey.
This document is not applicable to guided buses.
It provides measurement procedures for vehicle interior noise (in general, a vehicle type test is carried out using only a selected subset of these tests):
—    when the vehicle is moving at constant speed;
—    when the vehicle is stationary;
—    when the vehicle is accelerating or decelerating;
—    in the driver's cab when an external warning horn is sounding (specifically required for European Union regulation application)
It does not provide measurement procedures for:
—    audibility or intelligibility of any audible signals;
—    assessment of warning devices other than warning horns.
The assessment of noise exposure of train crew due to operational conditions is not in the scope of this document.
The results can be used, for example:
—    to characterise the noise inside these units;
—    to compare the internal noise of various units on a particular track section;
—    to collect basic source data for units.
The test procedures specified in this document are of engineering grade (grade 2), the preferred grade for noise declaration purposes as defined in ISO 12001. If test conditions are relaxed, for example as they are for monitoring of in-service trains, then the results are no longer of engineering grade.
The procedures specified for accelerating and decelerating tests are of survey grade (grade 3).

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-6:2018+A1:2021(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
SIST EN 1793-6:2018+A1:2021

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2922:2020(Main)
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
SIST EN ISO 2922:2021

This document specifies the conditions for obtaining reproducible and comparable measurement results of the airborne sound emitted by vessels of all kinds, on inland waterways and in ports and harbours, except powered recreational craft as specified in the ISO 14509 series. This document is applicable to sea-going vessels, harbour vessels, dredgers, and all watercraft, including non-displacement craft, used or capable of being used as a means of transport on water. There are no limitations to the application of this document with regard to speed, length and height of vessels, as long as the ship is determined to act like a point source at the reference distance of 25 m.
All noise data obtained in accordance with this document are referred to a reference distance of 25 m.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17285:2020(Main)
Railway applications - Acoustics - Measuring of door audible warnings
SIST EN 17285:2020

This document specifies procedures to assess acoustic signals at passenger external doors applying to all kind of rolling stock. The following applies to this standard:
-   this document refers to acoustical passenger information indicating the release, opening and closing of passenger doors;
-   this document is applicable to tonal signals with defined frequency components levels and pulse sequences;
-   this document is not applicable to spoken information or to signals comprising a sequence of impulses (such as a door finding signal).
NOTE   Acoustic door signals are defined in EN 16584 2 "Design for PRM use".

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15610:2019(Main)
Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
SIST EN 15610:2019

1.1   This document specifies a direct measurement method for characterizing the surface roughness of the rail and wheel associated with rolling noise ("acoustic roughness"), in the form of a one-third octave band spectrum.
This document describes a method for:
a)   selecting measuring positions along a track or selecting wheels of a vehicle;
b)   selecting lateral positions for measurements;
c)   the data acquisition procedure;
d)   measurement data processing in order to estimate a set of one-third octave band roughness spectra;
e)   presentation of this estimate for comparison with limits of acoustic roughness;
f)   comparison with a given upper limit in terms of a one-third octave band wavelength spectrum;
g)   the measuring system requirements.
1.2   It is applicable to the:
a)   compliance testing of reference track sections in relation to the acceptance test for noise emitted by railway vehicles;
b)   performance testing of track sections in relation to noise emitted by railway vehicles;
c)   acceptance of the running surface condition only in the case where the acoustic roughness is the acceptance criterion;
d)   assessment of the wheel surface condition as an input for the acoustic acceptance of brake blocks;
e)   assessment of the wheel and rail roughness as input to the calculation of combined wheel rail roughness;
f)   diagnosis of wheel-rail noise issues for specific tracks or wheels;
g)   assessment of the wheel and rail roughness as input to rolling noise modelling;
h)   assessment of the wheel and rail roughness as input to noise source separation methods.
1.3   It is not applicable to the:
a)   measurement of roughness (rail roughness, wheel roughness or combined roughness) using an indirect method;
b)   analysis of the effect of wheel-rail interaction, such as a “contact filter”;
c)   approval of rail and wheel reprofiling, including rail grinding operations, except for those where the acoustic roughness is specifically the approval criterion (and not the grinding quality criteria as provided in e.g. EN 13231-3);
d)   characterization of track and wheel geometry except where associated with noise generation.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day