EN 934-2:2001/A2:2005
(Amendment)Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete
and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may
not be applicable to admixtures intended for other types of concrete such as semi-dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i. e. requirements concerning
composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 2: Betonzusatzmittel - Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung
Adjuvants pour béton, mortier et coulis - Partie 2: Adjuvants pour béton - Définitions, exigences, conformité, marquage et étiquetage
Kemijski dodatki za beton, malto in injekcijsko maso – 2. del: Kemijski dodatki za beton – Definicije, zahteve, skladnost, označevanje in obeleževanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 934-2:2002/A2:2006
01-maj-2006
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR±GHO .HPLMVNLGRGDWNL]D
EHWRQ±'HILQLFLMH]DKWHYHVNODGQRVWR]QDþHYDQMHLQREHOHåHYDQMH
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions,
requirements, conformity, marking and labelling
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 2: Betonzusatzmittel -
Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung
Adjuvants pour béton, mortier et coulis - Partie 2: Adjuvants pour béton - Définitions,
exigences, conformité, marquage et étiquetage
Ta slovenski standard je istoveten z: EN 934-2:2001/A2:2005
ICS:
01.040.91
91.100.30
SIST EN 934-2:2002/A2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 934-2:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 01.040.91; 91.100.30
English Version
Admixtures for concrete, mortar and grout - Part 2: Concrete
admixtures - Definitions, requirements, conformity, marking and
labelling
Adjuvants pour béton, mortier et coulis - Partie 2: Adjuvants Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 2:
pour béton - Définitions, exigences, conformité, marquage Betonzusatzmittel; Definitionen, Anforderungen,
et étiquetage Konformität, Kennzeichnung und Beschriftung
This amendment A2 modifies the European Standard EN 934-2:2001; it was approved by CEN on 20 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 934-2:2001/A2:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 934-2:2001/A2:2005 (E)
Contents
Page
Foreword .3
1 Modification in Clause 2 Normative references.4
2 Modification in 4.1 General requirements .4
3 Modification in 4.2 Requirements for specific types of admixtures.4
4 Modification in Table 3.2.4
5 Modification in Clause 6 Conformity control .4
6 Modification in Annex ZA, Table ZA.1, column "Requirement clauses in this standard" .5
2
---------------------- Page: 3 ----------------------
EN 934-2:2001/A2:2005 (E)
Foreword
This European Standard (EN 934-2:2001/A2:2005) has been prepared by Technical Committee CEN/TC 104
“Concrete and related products”, the secretariat of which is held by DIN.
This Amendment to the European Standard EN 934-2:2001 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.
This European Standard covers matters for which the need for amendments or corrections to EN 934-2: 2001-
07 has been identified by CEN/TC 104 “Concrete and related products”.
The numbering and headlines in the following correspond to those in EN 934-2 for which the amendments and
corrections apply.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.