EN 934-2:2001/A1:2004

Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete
and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may
not be applicable to admixtures intended for other types of concrete such as semi-dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i. e. requirements concerning
composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Betonzusatzmittel - Teil 2: Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung

Adjuvants pour béton, mortier et coulis - Adjuvants pour béton - Partie 2 : Définitions, exigences, conformité, marquage et étiquetage

Kemijski dodatki za beton, malto in injekcijsko maso - Kemijski dodatki za beton - 2. del: Definicije, zahteve, skladnost, označevanje in obeleževanje

General Information

• Status: Withdrawn
• Publication Date: 05-Oct-2004
• Withdrawal Date: 26-May-2009
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 3 - Admixtures for concrete
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-May-2009
• Completion Date: 27-May-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 934-2:2002/A1:2004 - Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling

Relations

• Replaced By: EN 934-2:2009 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
• Effective Date: 30-May-2009
• Amends: EN 934-2:2001 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2004
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR.HPLMVNLGRGDWNL]DEHWRQ
GHO'HILQLFLMH]DKWHYHVNODGQRVWR]QDþHYDQMHLQREHOHåHYDQMH
Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions,
requirements, conformity, marking and labelling
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Betonzusatzmittel - Teil 2:
Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung
Adjuvants pour béton, mortier et coulis - Adjuvants pour béton - Partie 2 : Définitions,
exigences, conformité, marquage et étiquetage
Ta slovenski standard je istoveten z: EN 934-2:2001/A1:2004
ICS:
01.040.91
91.100.30
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 934-2:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 01.040.91; 91.100.30
English version
Admixtures for concrete, mortar and grout - Concrete admixtures
- Part 2: Definitions, requirements, conformity, marking and
labelling
Adjuvants pour béton, mortier et coulis - Adjuvants pour Zusatzmittel für Beton, Mörtel und Einpressmörtel -
béton - Partie 2 : Définitions, exigences, conformité, Betonzusatzmittel - Teil 2: Definitionen, Anforderungen,
marquage et étiquetage Konformität, Kennzeichnung und Beschriftung
This amendment A1 modifies the European Standard EN 934-2:2001; it was approved by CEN on 29 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 934-2:2001/A1:2004: E
worldwide for CEN national Members.

Contents
Page
Foreword.3
1 Modification to Clause 2 .4
2 Modification to Table 2.4
3 Modification to Table 3.1.4
4 Modification to Table 3.2.4
5 Modification to Table 4.4
6 Modificati
...