iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14861:2004

(Main)

Forest machinery - Self propelled machinery - Safety requirements

Forest machinery - Self propelled machinery - Safety requirements

This document deals with all common significant hazards, hazardous situations and events of the following forestry machinery: fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors and harvesters as defined in ISO 6814 and also multi-function versions of these machines, when they are used as intended and under the conditions foreseen by the manufacturer, see Clause 4.
The machines listed can be of the mobile, ride-on or self-propelled type or a combination of these types.
The following significant hazards are excluded:
- thrown objects, that may occur on a particular machine,
- noise,
- vibration.
NOTE   Noise clauses including a noise test code will be developed as an amendment to this document.    
The use of this document will therefore not alone be sufficient to cover all significant risks for a majority of machines covered by this document.
The list of significant hazards dealt with in this document is given in normative Annex A. This Annex is the list of significant hazards that have been identified as common to the covered mobile, ride-on and self-propelled forestry machines.
It is not applicable to environmental hazards.
This document is not applicable to machines, which are manufactured before the date of publication of this document by CEN.

Forstmaschinen - Selbstfahrer - Sicherheitsanforderungen

Die vorliegende Internationale Norm legt allgemeine Sicherheitsanforderungen für speziell für den Forsteinsatz konstruierte selbstfahrende Maschinen nach ISO 6814:1983, Abschnitt 4 fest sowie für adaptierte Maschinen, wenn sie am Arbeitsort oder für Transportarbeiten eingesetzt werden.

Machines forestières - Machines automotrices - Prescriptions de securité

Gozdarski stroji - Stroji z lastnim pogonom - Varnostne zahteve

General Information

Status
Withdrawn
Publication Date
03-Aug-2004
Withdrawal Date
20-Oct-2009
ICS
65.060.80 - Forestry equipment
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 8 - Forestry machinery
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Oct-2009
Completion Date
21-Oct-2009
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 14861:2004 - Forest machinery - Self propelled machinery - Safety requirements

Relations

Merged Into
EN 14861:2004+A1:2009 - Forest machinery - Self propelled machinery - Safety requirements
Effective Date
18-Jan-2023
Amended By
EN 14861:2004/prA1 - Forest machinery - Self propelled machinery - Safety requirements
Effective Date
22-Dec-2008
Revised
EN ISO 11850:2011 - Machinery for forestry - General safety requirements (ISO 11850:2011)
Effective Date
22-Dec-2008

Buy Standard

EN 14861:2004EN 14861:2004
PreviousNext
Standard
EN 14861:2004
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14861:2004
01-november-2004
Gozdarski stroji - Stroji z lastnim pogonom - Varnostne zahteve
Forest machinery - Self propelled machinery - Safety requirements
Forstmaschinen - Selbstfahrer - Sicherheitsanforderungen
Machines forestieres - Machines automotrices - Prescriptions de securité
Ta slovenski standard je istoveten z: EN 14861:2004
ICS:
65.060.80 Gozdarska oprema Forestry equipment
SIST EN 14861:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14861:2004

---------------------- Page: 2 ----------------------

SIST EN 14861:2004

---------------------- Page: 3 ----------------------

SIST EN 14861:2004

---------------------- Page: 4 ----------------------

SIST EN 14861:2004

---------------------- Page: 5 ----------------------

SIST EN 14861:2004

---------------------- Page: 6 ----------------------

SIST EN 14861:2004

---------------------- Page: 7 ----------------------

SIST EN 14861:2004

---------------------- Page: 8 ----------------------

SIST EN 14861:2004

---------------------- Page: 9 -----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17822:2023(Main)
Forestry machinery - Requirements for sling gear and deflection pulleys for forestal hauling operations
SIST EN 17822:2023

This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications.
It is applicable to forestal hauling operations including rope-assisted felling.
This document is applicable to the following elements, sling gear and fastening elements:
-   deflection pulleys used in forestal hauling operation (see 3.22);
-   choker ropes;
-   choker chains;
-   radio-controlled chokers;
-   shackles;
-   round slings/tree protectors;
-   tree towing ropes;
-   rope slide hooks/rope sliders/choker hooks.
It is not applicable to the following sling gear:
-   the functional safety of radio-controlled chokers;
-   non-sheathed tree towing ropes made of synthetic fibres;
-   slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517:2021 (e.g. for the installation of the haul-back line).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11681-2:2022(Main)
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)
SIST EN ISO 11681-2:2022

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty).
The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B).
This document is applicable to chain-saws manufactured after its date of publication.
NOTE      Figure 1 shows an example of a chain-saw within the scope of this document.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11681-1:2022(Main)
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022)
SIST EN ISO 11681-1:2022

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to chain-saws manufactured after its date of publication.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11850:2011/A2:2022(Amendment)
Machinery for forestry - General safety requirements - Amendment 2: Access to operator's station and maintenance locations (ISO 11850:2011/Amd 2:2022)
SIST EN ISO 11850:2012/A2:2022
  • Amendment
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11806-1:2022(Main)
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)
SIST EN ISO 11806-1:2022

This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
NOTE       See Annex C for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19472-2:2022(Main)
Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)
SIST EN ISO 19472-2:2022

This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking).
This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E).
Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011.
This document is not applicable to traction aid winches manufactured before the date of its publication.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11806-2:2022(Main)
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
SIST EN ISO 11806-2:2022

This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1    A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication.
NOTE 2    See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22867:2021(Main)
Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
SIST EN ISO 22867:2022

This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.
Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.
Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11680-2:2021(Main)
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)
SIST EN ISO 11680-2:2022

This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1   A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication.
NOTE 2   See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11680-1:2021(Main)
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)
SIST EN ISO 11680-1:2022

This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication.
Brush cutters with a circular saw blade are not included in the scope of this document.
NOTE      Brush cutter requirements are outlined in ISO 11806-1:2021.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day