EN ISO 3059:2012
(Main)Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
ISO 3059:2012 specifies the control of the viewing conditions for magnetic particle and penetrant testing. It includes minimum requirements for the illuminance and UV-A irradiance and their measurement. It is intended for use when the human eye is the primary detection aid.
ISO 3059:2012 does not cover the use of actinic blue light sources.
Zerstörungsfreie Prüfung - Eindringprüfung und Magnetpulverprüfung - Betrachtungsbedingungen (ISO 3059:2012)
Diese Internationale Norm legt die Kontrolle der Betrachtungsbedingungen für die Magnetpulverprüfung und die Eindringprüfung fest. Sie enthält die Mindestanforderungen an die Beleuchtungsstärke und die UV A Bestrahlungsstärke und ihre Messungen. Sie gilt für Anwendungen, bei denen das menschliche Auge das Haupterfassungshilfsmittel ist.
Diese Internationale Norm deckt nicht die Anwendung aktinischer blauer Lichtquellen ab.
Essais non destructifs - Contrôle par ressuage et contrôle par magnétoscopie - Conditions d'observation (ISO 3059:2012)
L'ISO 3059:2012 spécifie les moyens de vérification des conditions d'observation lors des contrôles par magnétoscopie et par ressuage. Elle inclut les exigences minimales relatives à l'éclairement lumineux ainsi qu'à l'éclairement énergétique UV‑A et leur mesurage. Son utilisation est destinée aux cas où l'oeil est le principal instrument de détection.
L'ISO 3059:2012 n'est pas applicable à l'utilisation de sources de lumière bleue actinique.
Neporušitveno preskušanje - Penetrantsko preskušanje in preskušanje z magnetnimi delci - Pogoji opazovanja (ISO 3059:2012)
Ta mednarodni standard določa obvladovanje pogojev opazovanja za preskušanje z magnetnimi delci in penetrantsko preskušanje. Podaja minimalne zahteve za osvetljenost in sevanje UV-A ter ustrezne meritve. Namenjen je za uporabo pri primarnem zaznavanju s prostim očesom. Ta mednarodni standard ne zajema uporabe virov modre aktinične svetlobe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2013
1DGRPHãþD
SIST EN ISO 3059:2002
Neporušitveno preskušanje - Penetrantsko preskušanje in preskušanje z
magnetnimi delci - Pogoji opazovanja (ISO 3059:2012)
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing
conditions (ISO 3059:2012)
Zerstörungsfreie Prüfung - Eindringprüfung und Magnetpulverprüfung -
Betrachtungsbedingungen (ISO 3059:2012)
Essais non destructifs - Contrôles par ressuage et contrôles par magnétoscopie -
Moyens de vérification des conditions d'observation (ISO 3059:2012)
Ta slovenski standard je istoveten z: EN ISO 3059:2012
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3059
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 19.100 Supersedes EN ISO 3059:2001
English Version
Non-destructive testing - Penetrant testing and magnetic particle
testing - Viewing conditions (ISO 3059:2012)
Essais non destructifs - Contrôle par ressuage et contrôle Zerstörungsfreie Prüfung - Eindringprüfung und
par magnétoscopie - Conditions d'observation (ISO Magnetpulverprüfung - Betrachtungsbedingungen (ISO
3059:2012) 3059:2012)
This European Standard was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3059:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 3059:2012) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing", the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3059:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
INTERNATIONAL ISO
STANDARD 3059
Third edition
2012-12-01
Non-destructive testing — Penetrant
testing and magnetic particle testing —
Viewing conditions
Essais non destructifs — Contrôles par ressuage et contrôles par
magnétoscopie — Moyens de vérification des conditions d’observation
Reference number
ISO 3059:2012(E)
©
ISO 2012
ISO 3059:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 3059:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3059 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 138, Non-destructive testing, in collaboration with ISO Technical Committee ISO/TC 135, Non-
destructive testing, Subcommittee SC 2, Surface methods, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 3059:2001) which has been technically revised.
Changes from the second edition include:
— updating of the normative references;
— addition of a terms and definitions clause;
— review of requirements for colour contrast and fluorescent techniques;
— reduction of verification period of irradiation and illuminance meters to 12 months;
— an editorial review of the text.
ISO 3059:2012(E)
Introduction
Both penetrant and magnetic particle testing require controlled conditions for viewing indications, e.g.:
— adequate white light to achieve reliable testing with colour contrast techniques;
— adequate UV-A irradiance with minimal light for fluorescent systems.
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 3059:2012(E)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.