CEN ISO/TS 29001:2011
(Main)Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010)
Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010)
ISO/TS 29001:2010 defines the quality management system for product and service supply organizations for the petroleum, petrochemical and natural gas industries.
Boxed text is original ISO 9001:2008 text unaltered and in its entirety. The petroleum, petrochemical, and natural gas industry sector-specific supplemental requirements are outside the boxes.
Erdöl-, petrochemische und Erdgasindustrie - Sektorspezifische Qualitätsmanagementsysteme - Anforderungen an Hersteller- und Serviceorganisationen (ISO/TS 29001:2010)
Industries du pétrole, de la pétrochimie et du gaz naturel - Systèmes de management de la qualité spécifiques au secteur - Exigences pour les organismes de fourniture de produits et de services (ISO/TS 29001:2010)
L'ISO/TS 29001:2010 définit le système de management de la qualité pour les organismes de fourniture de produits et de services des industries du pétrole, de la pétrochimie et du gaz naturel.
Chaque texte encadré est celui de l'ISO 9001:2008 originale sans aucune altération et reproduit dans son intégralité. Les exigences supplémentaires spécifiques du secteur des industries du pétrole, de la pétrochimie et du gaz naturel ne sont pas encadrées.
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Sektorsko specifični sistemi vodenja kakovosti - Zahteve za proizvodne in storitvene organizacije (ISO/TS 29001:2010)
Ta mednarodni standard opredeljuje zahteve za vodenje in zagotavljanje kakovosti, kjer mora organizacija a) prikazati svojo sposobnost dosledno zagotavljati proizvode, ki izpolnjujejo zahteve kupcev, veljavne zakone in predpise; b) krepiti zadovoljstvo kupcev z učinkovito uporabo sistema, vključno s postopki za nenehno izboljševanje sistema in zagotavljanje skladnosti z zahtevami kupcev in veljavnimi zakoni in predpisi.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2012
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
6HNWRUVNRVSHFLILþQLVLVWHPLYRGHQMDNDNRYRVWL=DKWHYH]DSURL]YRGQHLQ
VWRULWYHQHRUJDQL]DFLMH ,6276
Petroleum, petrochemical and natural gas industries - Sector-specific quality
management systems - Requirements for product and service supply organizations
(ISO/TS 29001:2010)
Erdöl-, petrochemische und Erdgasindustrie - Sektorspezifische
Qualitätsmanagementsysteme - Anforderungen an Hersteller- und Serviceorganisationen
(ISO/TS 29001:2010)
Industries du pétrole, de la pétrochimie et du gaz naturel - Systèmes de management de
la qualité spécifiques au secteur - Exigences pour les organismes de fourniture de
produits et de services (ISO/TS 29001:2010)
Ta slovenski standard je istoveten z: CEN ISO/TS 29001:2011
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN ISO/TS 29001
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2011
ICS 03.120.10; 75.020
English Version
Petroleum, petrochemical and natural gas industries - Sector-
specific quality management systems - Requirements for
product and service supply organizations (ISO/TS 29001:2010)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie -
Systèmes de management de la qualité spécifiques au Sektorspezifische Qualitätsmanagementsysteme -
secteur - Exigences pour les organismes de fourniture de Anforderungen an Hersteller- und Serviceorganisationen
produits et de services (ISO/TS 29001:2010) (ISO/TS 29001:2010)
This Technical Specification (CEN/TS) was approved by CEN on 27 December 2010 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 29001:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO/TS 29001:2010 has been prepared by Technical Committee ISO/TC 67 “Materials, equipment
and offshore structures for petroleum, petrochemical and natural gas industries” of the International
Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 29001:2011 by Technical
Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries” the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO/TS 29001:2010 has been approved by CEN as a CEN ISO/TS 29001:2011 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 29001
Third edition
2010-06-01
Petroleum, petrochemical and natural gas
industries — Sector-specific quality
management systems — Requirements
for product and service supply
organizations
Industries du pétrole, de la pétrochimie et du gaz naturel — Systèmes
de management de la qualité spécifiques au secteur — Exigences pour
les organismes de fourniture de produits et de services
Reference number
ISO/TS 29001:2010(E)
©
ISO 2010
ISO/TS 29001:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO/TS 29001:2010(E)
Contents Page
Foreword .vi
Introduction.vii
0.1 General .vii
0.2 Process approach .viii
0.3 Relationship with ISO 9004.ix
0.4 Compatibility with other management systems.x
0.5 Goal of this Technical Specification.x
1 Scope.1
1.1 General .1
1.1.1 Field of Application — Supplemental.1
1.2 Application .2
1.2.1 Application — Supplemental.2
2 Normative references.2
3 Terms and definitions .2
3.1 Terms and definitions for the petroleum, petrochemical and natural gas industries.3
4 Quality management system.4
4.1 General requirements .4
4.1.1 Outsourced processes and/or services — Supplemental.4
4.2 Documentation requirements.5
4.2.1 General .5
4.2.2 Quality manual.5
4.2.2.1 Quality manual — Supplemental.5
4.2.3 Control of documents .6
4.2.3.1 Control of documents — Supplemental .6
4.2.3.2 Control of document changes — Supplemental .6
4.2.4 Control of records .6
4.2.4.1 Control of records — Supplemental .7
5 Management responsibility .7
5.1 Management commitment .7
5.2 Customer focus .7
5.3 Quality policy .8
5.3.1 Quality policy — Supplemental.8
5.4 Planning.8
5.4.1 Quality objectives.8
5.4.2 Quality management system planning.8
5.5 Responsibility, authority and communication .9
5.5.1 Responsibility and authority .9
5.5.2 Management representative.9
5.5.3 Internal communication.9
5.6 Management review .10
5.6.1 General .10
5.6.1.1 General — Supplemental .10
5.6.2 Review input .10
5.6.3 Review output.11
6 Resource management.11
6.1 Provision of resources.11
6.2 Human resources .11
6.2.1 General .11
6.2.2 Competence, training and awareness.12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.