EN 1124-2:2007

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions

This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems.  
It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.  
This European Standard is only valid in connection with EN 1124-1. It does not apply to the marking of products. EN 1124-1/A1 applies to the marking.

Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr, mit Steckmuffe für Abwasserleitungen - Teil 2: System S; Maße

Diese Norm gilt für Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steck¬muffe für Abwasserleitungen.
Sie legt Maße und Grenzabmaße für Rohre, Formstücke und Rohrverbindungen fest und enthält zur ein¬fachen Identifizierung jedes Bauteils ein System für die Bezeichnung der verschiedenen Arten von Rohren und Formstücken, die mit den getroffenen Anforderungen übereinstimmen.
Diese Europäische Norm gilt nur in Verbindung mit EN 1124 1. Sie gilt nicht für die Kennzeichnung der Produkte. Hierfür gilt EN 1124 1/A1.

Tubes et raccords de tubes soudés longitudinalement en acier inoxydable, à manchon enfichable pour réseaux d'assainissement - Partie 2: Système S - Dimensions

Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - Mere

General Information

• Status: Withdrawn
• Publication Date: 13-Nov-2007
• Withdrawal Date: 17-Jun-2014
• ICS: 23.040.05 - Pipeline and its parts for external sewage systems
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 23.040.40 - Metal fittings
• ICS: 23.040.60 - Flanges, couplings and joints
• Technical Committee: CEN/TC 165 - Waste water engineering
• Drafting Committee: CEN/TC 165/WG 7 - Steel pipes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Jun-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 1124-2:2009 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions

Relations

• Replaces: EN 1124-2:1999 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions
• Effective Date: 22-Dec-2008
• Replaced By: EN 1124-2:2014 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
• Effective Date: 18-Jun-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - MereRohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr, mit Steckmuffe für Abwasserleitungen - Teil 2: System S; MaßeTubes et raccords de tube soudés longitudinalement en acier inoxydable, a manchon enfichable pour réseaux d'assainissement - Partie 2: Systeme S; DimensionsPipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 1124-2:2007SIST EN 1124-2:2009en,fr,de01-januar-2009SIST EN 1124-2:2009SLOVENSKI
STANDARDSIST EN 1124-2:20001DGRPHãþD



SIST EN 1124-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1124-2November 2007ICS 23.040.10; 23.040.40; 23.040.60Supersedes EN 1124-2:1999
English VersionPipes and fittings of longitudinally welded stainless steel pipeswith spigot and socket for waste water systems - Part 2: SystemS; dimensionsTubes et raccords de tubes soudés longitudinalement enacier inoxydable, à manchon enfichable pour réseauxd'assainissement - Partie 2: Système S - DimensionsRohre und Formstücke aus längsnahtgeschweißtem,nichtrostendem Stahlrohr, mit Steckmuffe fürAbwasserleitungen - Teil 2: System S; MaßeThis European Standard was approved by CEN on 7 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1124-2:2007: ESIST EN 1124-2:2009



EN 1124-2:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Symbols.5 5 Dimensions.6 5.1 General and tolerances.6 5.2 Sockets.7 5.3 Pipes – Shape B 1.8 5.4 Bends.9 5.4.1 Bends – Shape C 1 and C 2.9 5.4.2 Bend with stilling section – Shape
C 3.10 5.5 Branches.
...