Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions

This standard applies to pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot
and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings, pipe connectors
and seals and establishes a system of designations for the different pipe and fitting types that conform to the
stated requirements. This standard is only valid in connection with EN 1123-1. This standard does not apply
to the marking of products. EN 1123-1 applies to the marking.

Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: Maße

Diese Europäische Norm gilt für Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Entwässerungssysteme in Gebäuden. Sie legt Maße und Grenzabmaße für Rohre, Formstücke, Rohrverbindungen und Dichtmittel fest und enthält zur einfachen Identifizierung jedes Bauteils ein System für die Bezeichnung der verschiedenen Arten von Rohren und Formstücken, die mit den getroffenen Anforderungen übereinstimmen. Diese Norm gilt nur in Verbindung mit EN 1123-1. Diese Norm gilt nicht für die Kennzeichnung der Produkte. Hierfür gilt EN 1123-1.

Tubes et raccords, soudés longitudinalement en acier galvanisé à chaude, à manchon enfichable, pour réseaux d'assainissement - Partie 2: Dimensions

La présente Norme européenne s’applique aux tubes et raccords soudés longitudinalement en acier galvanisé à chaud, à manchon enfichable, pour réseaux d’évacuation des bâtiments. Elle fixe les dimensions et les tolérances pour les tubes, raccords, jonctions de tubes et leurs joints et contient, pour simplifier l’identification de chaque composant, un système de désignation des divers types de tubes et raccords conformes aux exigences déterminées. La présente norme ne s’applique qu’associée à l’EN 1123-1. Elle ne s’applique pas au marquage des produits qui relève de l’EN 1123-1.

Vzdolžno varjene jeklene cevi in spojniki, vroče galvanizirani, z obojko, za sisteme za odpadno vodo - 2. del: Mere

General Information

Status
Published
Publication Date
25-Sep-2007
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
09-Jun-2022

Relations

Buy Standard

Standard
EN 1123-2:2007+A1:2007
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: MaßeTubes et raccords, soudés longitudinalement en acier galvanisé a chaude, a manchon enfichable, pour réseaux d'assainissement - Partie 2: DimensionsPipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions93.030Zunanji sistemi za odpadno vodoExternal sewage systems77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 1123-2:2006+A1:2007SIST EN 1123-2:2007+A1:2007en,fr,de01-december-2007SIST EN 1123-2:2007+A1:2007SLOVENSKI
STANDARD



SIST EN 1123-2:2007+A1:2007



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1123-2:2006+A1
September 2007 ICS 93.030 Supersedes EN 1123-2:2006 English Version
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
Tubes et raccords, soudés longitudinalement en acier galvanisé à chaude, à manchon enfichable, pour réseaux d'assainissement - Partie 2: Dimensions
Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: Maße This European Standard was approved by CEN on 13 October 2006 and includes Amendment 1 approved by CEN on 23 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1123-2:2006+A1:2007: ESIST EN 1123-2:2007+A1:2007



EN 1123-2:2007 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Symbols and abbreviations.7 5 Dimensions.7 5.1 General and tolerances.7 5.2 Sockets.9 5.3 Pipes.10 5.3.1 General.10 5.3.2 Pipe with one socket — Shape B 1.11 5.3.3 Pipe with two sockets — Shape B 2.12 5.4 Bends.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.