prEN ISO 13916
(Main)Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO/DIS 13916:2024)
Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO/DIS 13916:2024)
ISO 13916:2017 specifies requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. ISO 13916:2017 can also be applied as appropriate in the case of other welding processes. ISO 13916:2017 does not cover the measurement of post weld heat treatment temperatures.
Schweißen - Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur (ISO/DIS 13916:2024)
Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage (ISO/DIS 13916:2024)
L'ISO 13916 :2017 définit les prescriptions relatives à la mesure de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage lors du soudage par fusion. L'ISO 13916 :2017 peut également s'appliquer si nécessaire à d'autres procédés de soudage. L'ISO 13916 :2017 ne couvre pas la mesure des températures lors du traitement thermique après soudage.
Varjenje - Merjenje temperature predgrevanja, medvarkovne temperature in temperature vzdrževanja predgrevanja (ISO/DIS 13916:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Varjenje - Merjenje temperature predgrevanja, medvarkovne temperature in
temperature vzdrževanja predgrevanja (ISO/DIS 13916:2024)
Welding - Measurement of preheating temperature, interpass temperature and preheat
maintenance temperature (ISO/DIS 13916:2024)
Schweißen - Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur (ISO/DIS
13916:2024)
Soudage - Mesurage de la température de préchauffage, de la température entre
passes et de la température de maintien du préchauffage (ISO/DIS 13916:2024)
Ta slovenski standard je istoveten z: prEN ISO 13916
ICS:
17.200.99 Drugi standardi v zvezi s Other standards related to
termodinamiko thermodynamics
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 13916
ISO/TC 44/SC 10
Welding — Measurement of
Secretariat: DIN
preheating temperature, interpass
Voting begins on:
temperature and preheat
2024-07-12
maintenance temperature
Voting terminates on:
2024-10-04
Soudage — Mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du
préchauffage
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 13916:2024(en)
DRAFT
ISO/DIS 13916:2024(en)
International
Standard
ISO/DIS 13916
ISO/TC 44/SC 10
Welding — Measurement of
Secretariat: DIN
preheating temperature, interpass
Voting begins on:
temperature and preheat
2024-07-12
maintenance temperature
Soudage — Mesurage de la température de préchauffage, de la
Voting terminates on:
température entre passes et de la température de maintien du
préchauffage
2024-10-04
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 13916:2024(en)
ii
ISO/DIS 13916:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 Point of measurement .1
4.2 Time of measurement .3
4.3 Test equipment .3
5 Test report . 3
6 Designation . 3
6.1 General .3
6.2 Example 1 .3
6.3 Example 2 .3
Bibliography . 4
iii
ISO/DIS 13916:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.