EN ISO 286-2:2010/AC:2013
(Corrigendum)Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
General Information
- Abstract
This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI (for holes) and ei (for shafts) (see Figures 1 and 2).
- Status
- Published
- Publication Date
- 06-Aug-2013
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 07-Aug-2013
- Completion Date
- 07-Aug-2013
Relations
- Effective Date
- 12-Feb-2026
- Effective Date
- 15-May-2013
Get Certified
Connect with accredited certification bodies for this standard
BSMI (Bureau of Standards, Metrology and Inspection)
Taiwan's standards and inspection authority.
Sponsored listings
Frequently Asked Questions
EN ISO 286-2:2010/AC:2013 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)". This standard covers: This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI (for holes) and ei (for shafts) (see Figures 1 and 2).
This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI (for holes) and ei (for shafts) (see Figures 1 and 2).
EN ISO 286-2:2010/AC:2013 is classified under the following ICS (International Classification for Standards) categories: 17.040.10 - Limits and fits. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 286-2:2010/AC:2013 has the following relationships with other standards: It is inter standard links to ISO 286-2:2010/Cor 1:2013, EN ISO 286-2:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 286-2:2010/AC:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikation (GPS) - ISO-Toleranzsystem für Längenmaße - Teil 2: Tabellen der Grundtoleranzgrade und Grenzabmaße für Bohrungen und Wellen (ISO 286-2:2010/Cor 1:2013)Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2: Tableaux des classes de tolérance normalisées et des écarts limites des alésages et des arbres - Rectificatif technique 1 (ISO 286-2:2010/Cor 1:2013)Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)17.040.40Geometrical Product Specification (GPS)17.040.10Tolerance in ujemiLimits and fitsICS:Ta slovenski standard je istoveten z:EN ISO 286-2:2010/AC:2013SIST EN ISO 286-2:2010/AC:2014en01-junij-2014SIST EN ISO 286-2:2010/AC:2014SLOVENSKI
STANDARDSIST ISO 286-2:19991DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 286-2:2010/AC
August 2013
Août 2013
August 2013 ICS 17.040.10 English version Version Française Deutsche Fassung
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2: Tableaux des classes de tolérance normalisées et des écarts limites des alésages et des arbres - Rectificatif technique 1 (ISO 286-2:2010/Cor 1:2013) Geometrische Produktspezifikation (GPS) -ISO-Toleranzsystem für Längenmaße - Teil 2: Tabellen der Grundtoleranzgrade und Grenzabmaße für Bohrungen und Wellen (ISO 286-2:2010/Cor 1:2013) This corrigendum becomes effective on 7 August 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 7 août 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 7. August 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN ISO 286-2:2010/AC:2013 D/E/FSIST EN ISO 286-2:2010/AC:2014
Page Foreword .3
INTERNATIONAL STANDARD ISO 286-2:2010 TECHNICAL CORRIGENDUM 1 Published 2013-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
— Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts TECHNICAL CORRIGENDUM 1 Spécification géométrique des produits (GPS) — Système de codification ISO pour les tolérances sur les
...