EN 27435:1992
(Main)Slotted set screws with long dog point (ISO 7435:1983)
Slotted set screws with long dog point (ISO 7435:1983)
Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,6 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.
Gewindestifte mit Schlitz und Zapfen (ISO 7435:1983)
Vis sans tête, fendues, à téton long (ISO 7435:1983)
La présente Norme internationale spécifie les caractéristiques des vis sans tête, fendues, à téton long, de diamètre nominal de filetage M 1,6 à M 12 inclus et de grade A. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898, ISO 965, ISO 3506, 4759/1.
Navojni zatiči z zarezo in čepom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gewindestifte mit Schlitz und Zapfen (ISO 7435:1983)Vis sans tete, fendues, a téton long (ISO 7435:1983)Slotted set screws with long dog point (ISO 7435:1983)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 27435:1992SIST EN 27435:1996en01-april-1996SIST EN 27435:1996SLOVENSKI
STANDARD
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(LLYHAPO~HAR OPrAHH3ALW n0 CTAHAAPTM3Al&lM@ORGANISATION INTERNATIONALE DE NORMALISATION Slotted set screws with long dog Point Vis sans t-he, fendues, d tbton long First edition - 1983-09-01 U DC 621 l 82.219.4.092.5 Ref. No. ISO 7435-1983 (E) Descriptors : fasteners, screws, slotted headless screws, dimensions, specifications, designation. Price based on 3 pages SIST EN 27435:1996
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 7435 was developed by Technical Committee ISO/TC 2, Fasteners, and was circulated to the member bodies in December 1981. lt has been approved by the member bodies of the following countries: Austria Belgium Brazil China Czechoslova kia Denmark Egypt, Arab Rep. of Finland France Germany, F. R. lndia liungary Ireland Italy Japan Korea, Dem. P. Rep. of Korea, Rep. of Mexico Netherlands New Zealand No member body expressed disapproval of the document. Norway Poland Romania South Africa, Rep. of Spain Sweden Switzerland United Kingdom USSR 0 International Organization for Standardization, 1983 0 Printed in Switzerland SIST EN 27435:1996
INTERNATIONAL STANDARD ISO 74354983 (E) Slotted set screws with long dog Point 1 Scope and field of application This International Standard specifies the characteristics of slotted set screws with long dog Point and thread sizes from M 1,6 to M 12 inclusive and product grade A. If other specifications are required, it is recommended that they should be selected from existing International Standar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.