EN ISO 294-2:1998/A1:2005

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)

Kunststoffe - Spritzgießen von Probekörpern aus Thermoplasten - Teil 2: Kleine Zugstäbe - Änderung 1 (ISO 294-2:1996/Amd 1:2004)

Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2: Barreaux de traction de petites dimensions (ISO 294-2:1996/Amd 1:2004)

Polimerni materiali - Vbrizgavanje plastomernih preskušancev – 2. del: Mali paličasti preskušanci (ISO 294-2:1996/Amd 1:2004)

General Information

• Status: Withdrawn
• Publication Date: 23-Aug-2005
• Withdrawal Date: 18-Dec-2018
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 3 - Mechanical properties and preparation of test specimens
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Dec-2018
• Ref Project: SIST EN ISO 294-2:2000/A1:2006 - Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)

Relations

• Replaced By: EN ISO 294-2:2018 - Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
• Effective Date: 26-Dec-2018
• Amends: EN ISO 294-2:1998 - Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2006
3ROLPHUQLPDWHULDOL9EUL]JDYDQMHSODVWRPHUQLKSUHVNXãDQFHY±GHO0DOL
SDOLþDVWLSUHVNXãDQFL,62$PG
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small
tensile bars (ISO 294-2:1996/Amd 1:2004)
Kunststoffe - Spritzgießen von Probekörpern aus Thermoplasten - Teil 2: Kleine
Zugstäbe - Änderung 1 (ISO 294-2:1996/Amd 1:2004)
Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques -
Partie 2: Barreaux de traction de petites dimensions (ISO 294-2:1996/Amd 1:2004)
Ta slovenski standard je istoveten z: EN ISO 294-2:1998/A1:2005
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 294-2:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 83.080.20
English Version
Plastics - Injection moulding of test specimens of thermoplastic
materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd
1:2004)
Plastiques - Moulage par injection des éprouvettes de Kunststoffe - Spritzgießen von Probekörpern aus
matériaux thermoplastiques - Partie 2: Barreaux de traction Thermoplasten - Teil 2: Kleine Zugstäbe - Änderung 1 (ISO
de petites dimensions (ISO 294-2:1996/Amd 1:2004) 294-2:1996/Amd 1:2004)
This amendment A1 modifies the European Standard EN ISO 294-2:1998; it was approved by CEN on 8 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 294-2:1998/A1:2005: E
worldwide for CEN national Members.

Foreword
The text of ISO 294-2:1996/Amd 1:2004 has been prepared by Technical Committee ISO/TC 61
"Plastics” of the International Organization for Standardization (ISO) and has been taken over as
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2006, and conflicting national
standards shall be withdrawn at the latest by February 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 294-2:1996/Amd 1:2004 has been approved by CEN as EN ISO 294-
2:1998/A1:2005 without any modifications.

INTERNATIONAL ISO
STANDARD 294-2
First editio
...