Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality

This European Standard characterizes the quality of track geometry based on parameters defined in EN 13848 1 and specifies the different track geometry classes which should be considered.
This European Standard covers the following topics:
- description of track geometry quality;
- classification of track quality according to track geometry parameters;
- considerations on how this classification can be used;
- this European Standard applies to high-speed and conventional lines of 1 435 mm and wider gauge;
- this European Standard forms an integral part of EN 13848 series.

Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 6: Charakterisierung der geometrischen Gleislagequalität

Diese Europäische Norm beschreibt die Qualität der Gleisgeometrie entsprechend den Parametern nach EN 13848-1 und legt die zu berücksichtigenden unterschiedlichen Gleisgeometrieklassen fest.
Diese Europäische Norm enthält die folgenden Themen:
- Beschreibung der Gleislagequalität;
- Klassifizierung der Gleisqualität nach den Parametern der Gleisgeometrie;
- Hinweise zur Anwendung dieser Klassifizierung;
- diese Europäische Norm gilt für Hochgeschwindigkeitsstrecken und konventionellen Strecken mit 1 435 mm und größeren Spurweiten;
- diese Europäische Norm ist Bestandteil der Normenreihe EN 13848.

Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 6: Caractérisation de la qualité géométrique de la voie

Cette Norme européenne caractérise la qualité de la géométrie des voies sur la base des paramètres définis dans l’EN 13848-1 et spécifie les différentes classes de géométrie de voie qui doivent être considérées.
Cette Norme européenne couvre les sujets suivants :
- description de la qualité géométrique de la voie ;
- classification des niveaux de qualité des voies, conformément aux paramètres de géométrie de voie ;
- considérations sur les façons dont cette classification peut être utilisée ;
- cette Norme européenne s’applique aux lignes à grande vitesse et aux lignes classiques ayant un écartement de voie de 1 435 mm et plus ;
- cette Norme européenne fait partie intégrante de la série EN 13848.

Železniške naprave - Zgornji ustroj proge - Kakovost tirne geometrije - 6. del: Karakterizacija kakovosti tirne geometrije

Na podlagi parametrov, navedenih v standardu EN 13848-1, standard EN 13848-6 opisuje kakovost tirne geometrije in določa različne razrede tirne geometrije, ki jih je treba upoštevati. Ta evropski standard obravnava naslednje teme: – opis kakovosti tirne geometrije; – klasifikacija tirne kakovosti glede na parametre tirne geometrije; – možnosti uporabe te klasifikacije. Ta standard velja za visokohitrostne in običajne proge s širino 1435 mm ali več, če so vozila, ki obratujejo na njih, skladna s standardom EN 14363 in drugimi standardi o varnosti vozil. Ta standard je sestavni del serije EN 13848.

General Information

Status
Withdrawn
Publication Date
25-Mar-2014
Withdrawal Date
24-Nov-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
25-Nov-2020

Relations

Buy Standard

Standard
EN 13848-6:2014
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13848-6:2012 - BARVE
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj proge - Kakovost tirne geometrije - 6. del: Karakterizacija kakovosti tirne geometrijeBahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 6: Charakterisierung der geometrischen GleislagequalitätApplications ferroviaires - Voie - Qualité géométrique de la voie - Partie 6: Caractérisation de la qualité géométrique de la voieRailway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality93.100Gradnja železnicConstruction of railways45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13848-6:2014SIST EN 13848-6:2014en,fr,de01-maj-2014SIST EN 13848-6:2014SLOVENSKI
STANDARD



SIST EN 13848-6:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13848-6
March 2014 ICS 93.100 English Version
Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 6: Caractérisation de la qualité géométrique de la voie
Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 6: Charakterisierung der geometrischen Gleislagequalität This European Standard was approved by CEN on 3 February 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13848-6:2014 ESIST EN 13848-6:2014



EN 13848-6:2014 (E) 2 Contents Page Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions, symbols and abbreviations . 5 3.1 Terms and definitions . 5 3.2 Symbols and abbreviations . 5 4 Basic principles . 6 4.1 Introduction . 6 4.2 Transparency . 6 4.3 Complexity . 7 4.4 Track-vehicle interaction . 7 5 Assessment of track geometry quality: state-of-the-art . 7 5.1 General . 7 5.2 Standard deviation (SD) .
...

SLOVENSKI STANDARD
oSIST prEN 13848-6:2012
01-julij-2012
Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 6. del:
Karakteristike kakovosti tirne geometrije
Railway applications - Track - Track geometry quality - Part 6: Characterisation of track
geometry quality
Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 6: Charakterisierung
der geometrischen Gleislagequalität
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 6:
Caractérisation de la qualité géométrique de la voie
Ta slovenski standard je istoveten z: prEN 13848-6
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
93.100 Gradnja železnic Construction of railways
oSIST prEN 13848-6:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13848-6:2012

---------------------- Page: 2 ----------------------
oSIST prEN 13848-6:2012


EUROPEAN STANDARD
DRAFT
prEN 13848-6
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2012
ICS 93.100
English Version
Railway applications - Track - Track geometry quality - Part 6:
Characterisation of track geometry quality
Applications ferroviaires - Voie - Qualité géométrique de la Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie
voie - Partie 6: Caractérisation de la qualité géométrique de - Teil 6: Charakterisierung der geometrischen
la voie Gleislagequalität
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13848-6:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13848-6:2012
prEN 13848-6:2012 (E)
Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols and abbreviations . 4
5 Basic principles . 5
5.1 Introduction . 5
5.2 Basic parameters for track geometry quality assessment . 5
5.3 Transparency . 5
5.4 Complexity . 5
5.5 Tr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.