EN ISO 19901-5:2016

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016)

ISO 19901:2016 specifies requirements for controlling the weight and centre of gravity (CoG) by means of mass management during the engineering and construction of structures for the offshore environment. The provisions are applicable to offshore projects that include structures of all types (fixed and floating) and materials. These structures can be complete new installations or the modifications to existing installations. Maintaining the weight control of existing installations is not part of the main body of this part of ISO 19901, but some guidance on this is included in the Annex G.
ISO 19901:2016:
- specifies quality requirements for reporting of weights and centres of gravity;
- specifies requirements for weight reporting;
- provides a basis for overall project weight reports or management reports for all weight control classes;
- specifies requirements for weight and load budgets;
- specifies the methods and requirements for the weighing and the determination of weight and CoG of major assemblies;
- specifies requirements for weight information from suppliers, including weighing of equipment and bulk materials for offshore installations.
It can be used:
- as a basis for planning, evaluating and presenting the client's, contractor's or fabricator's weight management and reporting system;
- as a means of refining the structural analysis or model;
- as a contract reference between client, contractor and suppliers;
- as a basis for costing, scheduling or determining suitable fabrication method(s) or location(s).

Erdöl- und Erdgasindustrie - Besondere Anforderungen an Offshore-Bauwerke - Teil 5: Gewichtskontrolle während der Auslegung und Konstruktion (ISO 19901-5:2016)

Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 5: Contrôle des poids durant la conception et la fabrication (ISO 19901-5:2016)

L'ISO 19901-5:2016 spécifie les exigences relatives au contrôle du poids et du centre de gravité (CdG) par la gestion des masses pendant les phases d'étude et de construction des structures en mer. Les dispositions s'appliquent aux projets de tous types (structures en mer fixes et flottantes) et matériaux. Ces structures peuvent être des installations entièrement nouvelles ou des modifications d'installations existantes. Le corps principal de l'ISO 19901-5:2016 ne traite pas du suivi des poids des installations existantes. Toutefois, l'Annexe G du présent document fournit des lignes directrices.
L'ISO 19901-5:2016:
- spécifie les exigences de qualité pour l'établissement de rapports de poids et de centres de gravité;
- spécifie les exigences relatives aux rapports de poids;
- fournit une base commune pour l'établissement de rapports de poids ou de suivi du projet dans son ensemble, quelle que soit la classe de suivi de poids considérée;
- spécifie les exigences relatives aux bilans de poids et de charges;
- spécifie les méthodes et les exigences relatives au pesage et à la détermination du poids et du centre de gravité des principaux ensembles;
- spécifie les exigences relatives aux données de poids provenant des fournisseurs, y compris le pesage des équipements et des matériels courants pour les installations en mer.
Elle peut être utilisée:
- comme base de planification, d'évaluation et de présentation du système de suivi et de gestion des poids du maître d'ouvrage, du contracteur ou du fabricant;
- comme moyen d'amélioration de l'analyse ou du modèle des structures;
- comme référence pour l'établissement du contrat entre le maître d'ouvrage, le contracteur et les fournisseurs;
- comme base d'établissement des coûts, de programmation ou de détermination de la (des) méthode(s) ou de l'emplacement de fabrication approprié(s).

Industrija za predelavo nafte in zemeljskega plina - Posebne zahteve za naftne ploščadi - 5. del: Nadzor teže med projektiranjem in gradnjo (ISO 19901-5:2016)

Ta del standarda ISO 19901 določa zahteve za nadzor teže in težišča (CoG) v okviru upravljanja teže med projektiranjem in gradnjo naftnih ploščadi. Določila veljajo za naftne ploščadi, ki vključujejo strukture (nepremične in plavajoče) ter materiale vseh vrst. Te strukture so lahko popolnoma nove ali nadgradnje obstoječih. Vzdrževanje nadzora teže pri obstoječih strukturah ni obravnavano v osrednjem sklopu tega dela standarda ISO 19901, temveč so nekatere smernice o tem zajete v dodatku G.
Ta del standarda ISO 19901:
– določa zahteve glede kakovosti za poročanje o težah in težiščih;
– določa zahteve za poročanje o teži;
– podaja osnovo za splošna projektna poročila o teži ali upravljavska poročila za vse razrede nadzora teže;
– določa zahteve za proračune teže in obremenitve;
– določa metode in zahteve za tehtanje ter določanje teže in težišča
glavnih sestavov;
– določa zahteve za informacije o teži, posredovane s strani dobaviteljev, vključno s tehtanjem opreme in
nepakiranim materialom za naftne ploščadi.
Uporablja se lahko kot:
– podlaga za načrtovanje, vrednotenje in predstavitev naročnikovega, izvajalčevega ali izdelovalčevega sistema za upravljanje in poročanje teže;
– sredstvo za izboljšanje strukturne analize ali modela;
– referenčna pogodba med naročnikom, izvajalcem in dobavitelji;
– podlaga za izračun stroškov, izdelavo terminskega načrta ali določanje ustreznih metod ali lokacij izdelave.

General Information

• Status: Withdrawn
• Publication Date: 15-Mar-2016
• Withdrawal Date: 30-Nov-2021
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Dec-2021
• Ref Project: SIST EN ISO 19901-5:2016 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016)

Relations

• Replaces: EN ISO 19901-5:2003 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003)
• Effective Date: 23-Mar-2016
• Replaced By: EN ISO 19901-5:2021 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight management (ISO 19901-5:2021)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2016
1DGRPHãþD
SIST EN ISO 19901-5:2004
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3RVHEQH]DKWHYH]DQDIWQH
SORãþDGLGHO1DG]RUWHåHPHGSURMHNWLUDQMHPLQJUDGQMR,62
Petroleum and natural gas industries - Specific requirements for offshore structures -
Part 5: Weight control during engineering and construction (ISO 19901-5:2016)
Erdöl- und Erdgasindustrie - Besondere Anforderungen an Offshore-Bauwerke - Teil 5:
Gewichtskontrolle während der Auslegung und Konstruktion (ISO 19901-5:2016)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures
en mer - Partie 5: Contrôle des poids durant la conception et la fabrication (ISO 19901-
5:2016)
Ta slovenski standard je istoveten z: EN ISO 19901-5:2016
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19901-5
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN ISO 19901-5:2003
English Version
Petroleum and natural gas industries - Specific
requirements for offshore structures - Part 5: Weight
control during engineering and construction (ISO 19901-
5:2016)
Industries du pétrole et du gaz naturel - Exigences Erdöl- und Erdgasindustrie - Besondere
spécifiques relatives aux structures en mer - Partie 5: Anforderungen an Offshore-Bauwerke - Teil 5:
Contrôle des poids durant la conception et la Gewichtskontrolle während der Auslegung und
fabrication (ISO 19901-5:2016) Konstruktion (ISO 19901-5:2016)
This European Standard was approved by CEN on 30 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19901-5:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 19901-5:2016) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 19901-5:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19901-5:2016 has been approved by CEN as EN ISO 19901-5:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 19901-5
Second edition
2016-02-15
Petroleum and natural gas
industries — Specific requirements
for offshore structures —
Part 5:
Weight control during engineering
and construction
Industries du pétrole et du gaz naturel — Exigences spécifiques
relatives aux structures en mer —
Partie 5: Contrôle des poids durant la conception et la fabrication
Reference number
ISO 19901-5:2016(E)
©
ISO 2016
ISO 19901-5:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 19901-5:2016(E)
Contents Page
Foreword .v
0 Introduction .vi
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 2
4 Abbreviated terms . 8
5 Weight control classes . 8
5.1 General . 8
5.2 Class A: High definition of weight and CoG . 8
5.3 Class B: Medium definition of weight and CoG. 8
5.4 Class C: Low definition of weight and CoG . 9
5.5 Selection of class of weight control . 9
6 Weight and load budget (WLB).10
6.1 General .10
6.2 Requirements .11
6.3 Content .11
6.3.1 General.11
6.3.2 Weight reserves .12
6.3.3 Future weights and loads .13
6.3.4 Loading conditions and parameters .13
6.3.5 Formats and levels.14
6.3.6 CoG envelopes .14
7 Weight control procedure .15
8 Weight reporting .16
8.1 General .16
8.2 Weight report requirements .17
9  Requirements for suppliers’ weight data and weighing of equipment and bulks .20
9.1 General .20
9.2 Provision of weight information .20
9.3 Weighing requirements .20
9.4 Weighing equipment .21
9.5 Weighing procedure .21
9.6 Notification and witnessing of weighing .22
9.7 Calibration of weighing equipment .22
9.8 Weighing operation .22
9.9 Temporaries during weighing .23
9.10 Items not installed during weighing .23
10  Requirements for weighing of major assemblies .23
10.1 Weighing procedure .23
10.2 Environmental conditions .23
10.2.1 Light .23
10.2.2 Wind .24
10.2.3 Temperature and humidity .
...