EN ISO 7494-1:2011

Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011)

ISO 7494-1:2011 specifies requirements and test methods for dental units, regardless of whether or not they are electrically powered.
ISO 7494-1:2011 also specifies requirements for manufacturer's instructions, marking and packaging.

Zahnheilkunde - Zahnärztliche Behandlungseinheiten - Teil 1: Allgemeine Anforderungen und Prüfverfahren (ISO 7494-1:2011)

Dieser Teil von ISO 7494 legt Anforderungen und Prüfverfahren für zahnärztliche Behandlungseinheiten fest, unabhängig davon, ob sie elektrisch oder nicht elektrisch betrieben werden. Er enthält auch Anforderungen an die Gebrauchsanweisung, Kennzeichnung und Verpackung.

Médecine bucco-dentaire - Units dentaires - Partie 1: Exigences générales et méthodes d'essai (ISO 7494-1:2011)

L'ISO 7494-1:2011 spécifie les exigences et les méthodes d'essai relatives aux units dentaires, qu'ils soient mus électriquement ou non.
L'ISO 7494-1:2011 spécifie également les exigences relatives aux instructions du fabricant, au marquage et à l'emballage.

Zobozdravstvo - Dentalne enote - 1. del: Splošne zahteve in preskusne metode (ISO 7494-1:2011)

Ta del ISO 7494 določa zahteve in preskusne metode za dentalne enote, ne glede na to, ali so na električni pogon ali ne. Prav tako določa zahteve za navodila proizvajalca, označevanje in pakiranje.

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2011
• Withdrawal Date: 24-Jul-2018
• ICS: 11.060.20 - Dental equipment
• ICS: 11.060.25 - Dental instruments
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Jul-2018
• Ref Project: SIST EN ISO 7494-1:2011 - Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011)

Relations

• Replaces: EN ISO 7494-1:2005 - Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2004)
• Effective Date: 20-Aug-2011
• Replaced By: EN ISO 7494-1:2018 - Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements (ISO 7494-1:2018)
• Effective Date: 01-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7494-1:2011
01-december-2011
1DGRPHãþD
SIST EN ISO 7494-1:2005
Zobozdravstvo - Dentalne enote - 1. del: Splošne zahteve in preskusne metode
(ISO 7494-1:2011)
Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-
1:2011)
Zahnheilkunde - Zahnärztliche Behandlungsgeräte - Teil 1: Allgemeine Anforderungen
und Prüfverfahren (ISO 7494-1:2011)
Médecine bucco-dentaire - Units dentaires - Partie 1: Exigences et méthodes d'essai
générales (ISO 7494-1:2011)
Ta slovenski standard je istoveten z: EN ISO 7494-1:2011
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
SIST EN ISO 7494-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7494-1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 7494-1:2011


EUROPEAN STANDARD
EN ISO 7494-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 11.060.20 Supersedes EN ISO 7494-1:2005
English Version
Dentistry - Dental units - Part 1: General requirements and test
methods (ISO 7494-1:2011)
Médecine bucco-dentaire - Units dentaires - Partie 1: Zahnheilkunde - Zahnärztliche Behandlungseinheiten - Teil
Exigences générales et méthodes d'essai (ISO 7494- 1: Allgemeine Anforderungen und Prüfverfahren (ISO 7494-
1:2011) 1:2011)
This European Standard was approved by CEN on 14 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7494-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7494-1:2011
EN ISO 7494-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7494-1:2011
EN ISO 7494-1:2011 (E)
Foreword
This document (EN ISO 7494-1:2011) has been prepared by Technical Committee ISO/TC 106 “Dentistry” in
collaboration with Technical Committee CEN/TC 55 “Dentistry”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7494-1:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7494-1:2011 has been approved by CEN as a EN ISO 7494-1:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7494-1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 7494-1:2011

INTERNATIONAL ISO
STANDARD 7494-1
Second edition
2011-08-15

Dentistry — Dental units —
Part 1:
General requirements and test methods
Médecine bucco-dentaire — Units dentaires —
Partie 1: Exigences générales et méthodes d'essai




Reference num
...