Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves

This Part of EN 13244 specifies the characteristics of valves made from polyethylene (PE) intended to be used in the field of buried and above-ground pressure systems for water for general purposes, drainage and sewerage. It also specifies the test parameters for the test methods referred to in this Part of EN 13244. Valves made from material other than thermoplastics designed to a relevant standard(s) may be used in PE piping systems according to EN 13244 provided they have relevant PE connection ends see EN 13244-3 for butt fusion or electrofusion.

Kunststoff-Rohrleitungssysteme für erd- und oberirdisch verlegte Druckrohrleitungen für Brauchwasser, Entwässerung und Abwasser - Polyethylen (PE) - Teil 4: Armaturen

Dieser Teil von EN 13244 legt die Anforderungen an Armaturen oder Armaturenkörper aus Polyethylen (PE) fest, die für erd- und oberirdisch verlegte Druckrohrleitungen für Brauchwasser, Entwässerung und Abwasser eingesetzt werden. Er gilt auch für Vakuum-Abwassersysteme.
ANMERKUNG 1   Wasser für allgemeine Zwecke ist nicht für den menschlichen Gebrauch bestimmt und Rohrleitungsteile, die dieser Norm entsprechen sollten nicht für die Wasserversorgung für den menschlichen Gebrauch verwendet werden. Rohrleitungsteile aus PE für die Verwendung in der Wasserversorgung für den menschlichen Gebrauch und die Fortleitung von Rohwasser, das zur Aufbereitung von Trinkwasser genutzt wird, siehe EN 12201 [1].
ANMERKUNG 2   Armaturen aus anderen Werkstoffen als Polyethylen, die ebenfalls für den Einsatz in erd  und oberirdisch verlegten Druckrohrleitungen für Brauchwasser, Entwässerung und Abwasser vorgesehen sind und die Anforderungen der entsprechenden Norm(en) erfüllen, dürfen in Rohrleitungssystemen aus PE nach EN 13244 eingebaut werden, wenn die Verschweißbarkeit (Stumpf  oder Heizwendelschweißen) mit den entsprechenden Anschlüssen aus PE (siehe EN 13244 3) sichergestellt ist.
Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in dieser Norm verwiesen wird.
Zusammen mit den übrigen Teilen der EN 13244 (siehe Vorwort) gilt dieser Teil für Armaturen aus PE, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Werkstoffen, die unter den folgenden Bedingungen für die Wasserversorgung vorgesehen sind:
   Verlegung im Rohrgraben;
   Entwässerung ins Meer (Siele);
   Überlandleitungen in Binnengewässern oder in Kanälen;
   Düker und Brückenleitungen;
   der maximal zulässige Betriebsdruck MOP beträgt nicht mehr als 25 bar  ;
   es gilt eine Betriebstemperatur von 20 °C als Bezugstemperatur.
ANMERKUNG 3   Für Anwendungsgebiete, in denen konstante Betriebstemperaturen über 20 °C bis maximal 40 °C auftreten, können Druckminderungsfaktoren verwen

Systèmes de canalisations en plastique pour les applications générales de transport d'eau, de branchement et de collecteurs d'assainissement, enterrés sous pression - Polyéthylène (PE) - Partie 4: Robinets

La présente partie de l'EN 13244 spécifie les aspects généraux des systèmes de canalisations en polyéthylène pour les applications générales de transport d'eau, de branchements et de collecteurs d'assainissement enterrés et aériens sous pression. Elle s'applique aussi aux systèmes de collecteurs par le vide.
NOTE 1   L'eau pour les applications générales n'est pas destinée à la consommation humaine et il convient que les composants conformes à cette norme ne soient utilisés pour des systèmes de transport d'eau pour la consommation humaine. Pour les composants PE destinés au transport de l'eau pour la consommation humaine y compris les eaux brutes avant traitement , voir l'EN 12201[1] .
NOTE 2   Les robinets  fabriqués    à partir d'une matière autre que le polyéthylène (PE), conçus selon la (les) norme(s) appropriée(s) peuvent être utilisés dans les systèmes de canalisation PE conformément à l'EN 13244, à condition d'être dotés de terminaison de connexion pour le soudage bout à bout  ou l'électrosoudage (voir l'EN 13244-3).
Elle spécifie aussi les paramètres d'essai  pour les méthodes d'essai auxquelles il est fait référence dans la présente norme.
Conjointement aux autres parties de l'EN 13244 (voir avant-propos), elle s'applique aux robinets en PE, à leurs assemblages et aux assemblages avec des composants en d'autres en matières destinés à être utilisés selon les conditions suivantes :
   enterrés dans le sol ;
   déversoirs en mer ;
   posés dans l'eau ;
   au dessus du sol, y compris les tubes suspendus sous les ponts ;
   à une pression de service maximale, MOP, pouvant atteindre jusqu'à 25 bar ) ;
   à une température de service de 20 °C comme température de référence.
NOTE 3   Pour des applications fonctionnant à des températures constantes supérieures à 20 °C et jusqu'à 40 °C, voir l'Annexe A de l'EN 13244-1:2002.
L'EN 13244 comprend une gamme étendue de pressions de service et spécifie les exigences concernant les couleurs et les additifs.
NOTE 4   Il est de

Cevni sistemi iz polimernih materialov, podzemni in nadzemni, za tlačne vodovode splošne namembnosti, odvodnjavanje in kanalizacijo – Polietilen (PE) - 4. del: Ventili

General Information

Status
Withdrawn
Publication Date
10-Dec-2002
Withdrawal Date
31-Jan-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2012
Completion Date
01-Feb-2012

Relations

Buy Standard

Standard
EN 13244-4:2003
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.9HQWLOLKunststoff-Rohrleitungssysteme für erd- und oberirdisch verlegte Druckrohrleitungen für Brauchwasser, Entwässerung und Abwasser - Polyethylen (PE) - Teil 4: ArmaturenSystemes de canalisations en plastique pour les applications générales de transport d'eau, de branchement et de collecteurs d'assainissement, enterrés sous pression - Polyéthylene (PE) - Partie 4: RobinetsPlastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 13244-4:2002SIST EN 13244-4:2003en01-oktober-2003SIST EN 13244-4:2003SLOVENSKI
STANDARD



SIST EN 13244-4:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13244-4December 2002ICS 23.060.01; 93.030English versionPlastics piping systems for buried and above-ground pressuresystems for water for general purposes, drainage and sewerage- Polyethylene (PE) - Part 4: ValvesSystèmes de canalisations en plastique pour lesapplications générales de transport d'eau, de branchementet de collecteurs d'assainissement, enterrés sous pression- Polyéthylène (PE) - Partie 4: RobinetsKunststoff-Rohrleitungssysteme für erd- und oberirdischverlegte Druckrohrleitungen für Brauchwasser,Entwässerung und Abwasser - Polyethylen (PE) - Teil 4:ArmaturenThis European Standard was approved by CEN on 16 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13244-4:2002 ESIST EN 13244-4:2003



EN 13244-4:2002 (E)2ContentspageForeword.3Introduction.51Scope.62Normative references.63Definitions, symbols and abbreviations.74Material.84.1Compound for PE valve bodies.84.2Material for non-polyethylene parts.85General characteristics.95.1Appearance of the valve.95.2Design.95.3Colour.96Geometrical characteristics.106.1General.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.