EN 1870-1:2007+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), dimensions saws and building site saws, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer.
NOTE 1   For the definition of stationary and displaceable machine see 3.13 and 3.14.
NOTE 2   Circular saw benches, and dimension saws are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning.
The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool.
This document does not apply to:
a)   machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;
b)   hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting.
NOTE 3   Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002; hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2003 together with EN 60745-2-5:2003.
For the purpose of this document building site saws having a tiltable spindle are considered to be circular saw benches.
This document is not applicable to circular saw benches (with and without sliding table), dimensions saws and b

Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 1: Tischkreissägemaschinen (mit und ohne Schiebetisch), Formatkreissägemaschinen und Baustellenkreissägemaschinen

Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 1: Scies circulaires à table de menuisier (avec ou sans table mobile), scies au format et scies de chantier

Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels
qu’énumérés dans l’Article 4, applicables aux scies circulaires à table de menuisier (avec ou sans table mobile et/ou
unité d’alimentation escamotable), aux scies au format et aux scies de chantier, ci-après désignées sous le terme
«machines». Celles-ci sont conçues pour la coupe de bois massif, de panneaux de particules et de fibres, de
contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique et/ou de
plastique/alliages légers, durant l’utilisation normale et dans les conditions prévues par le !fabricant".
NOTE 1 Pour la définition de machines fixes et de machines transportables, voir 3.13 et 3.14.
NOTE 2 Les scies circulaires à table de menuisier et les scies au format sont utilisées pour le délignage, pour le tronçonnage,
pour la coupe au format et pour le rainurage. Les scies de chantier sont utilisées pour le délignage, pour le tronçonnage et pour
la coupe au format.
Les prescriptions du présent document s’appliquent aussi aux machines conçues pour le rainurage avec une largeur
ne dépassant pas 20 mm par passage d’une fraise.
Le présent document ne s’applique pas :
a) aux machines montées sur un établi ou une table similaire à un établi, qui sont conçues pour réaliser un travail
en position fixe et qui peuvent être soulevées à la main par une personne. L’établi peut également faire partie
intégrante de la machine s’il est composé de pieds articulés qui peuvent être dépliés ;
b) aux machines à bois portatives, y compris toute adaptation permettant leur utilisation de manière différente, par
exemple fixées sur un bâti.

Varnost lesnoobdelovalnih strojev - Krožne žage - 1. del: Delovne mize (s podajalno mizo ali brez nje), žage za rezanje na mero in žage na gradbišču

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2009
• Withdrawal Date: 23-Apr-2013
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: CEN/TC 142 - Woodworking machines - Safety
• Drafting Committee: CEN/TC 142/WG 4 - Circular sawing machines
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Apr-2013
• Completion Date: 24-Apr-2013
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1870-1:2007+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

Relations

• Merged From: EN 1870-1:2007 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 18-Jan-2023
• Merged From: EN 1870-1:2007/prA1 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 18-Jan-2023
• Replaced By: EN 1870-18:2013 - Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
• Effective Date: 08-Jun-2022
• Replaced By: EN 1870-19:2013 - Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.JUDGELãþXSicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 1: Tischkreissägemaschinen (mit und ohne Schiebetisch), Formatkreissägemaschinen und BaustellenkreissägemaschinenSécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 1: Scies circulaires à table de menuisier (avec ou sans table mobile), scies au format et scies de chantierSafety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-1:2007+A1:2009SIST EN 1870-1:2007+A1:2009en,fr01-april-2009SIST EN 1870-1:2007+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1870-1:2007+A1
January 2009 ICS 79.120.10 Supersedes EN 1870-1:2007English Version
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 1: Scies circulaires à table de menuisier (avec ou sans table mobile), scies au format et scies de chantier
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 1: Tischkreissägemaschinen (mit und ohne Schiebetisch), Formatkreissägemaschinen und Baustellenkreissägemaschinen This European Standard was approved by CEN on 24 February 2007 and includes Amendment 1 approved by CEN on 13 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-1:2007+A1:2009: ESIST EN 1870-1:2007+A1:2009

Test for rigidity of building site saws . 81Annex B (normative)
Saw spindle dimensional tolerances . 82Annex C (normative)
Riving knife mounting strength test . 83Annex D (normative)
Riving knife lateral stability test . 84Annex E (normative)
Minimum dimensions of the machine table, extension table and insert . 85Annex F (normative)
Saw blade guard stability test . 88F.1 General . 88F.2 Separately from riving knife mounted saw blade guards . 88F.2.1 Saw blade guards with lead-in . 88F.2.2 Saw blade guards with in-feed rollers . 89F.3 Riving knife mounted saw blade guards . 90Annex G (normative)
Impact test method for guards . 92G.1 General . 92G.2 Test method . 92G.2.1 Preliminary remarks . 92G.2.2 Testing equipment . 92G.2.3 Projectile for guards . 92G.2.4 Sampling. 92G.2.5 Test procedure . 92G.3 Results . 93G.4 Assessment . 93G.5 Test report . 93G.6 Test equipment for impact test . 93Annex H (informative)
Use of well tried components . 95Annex I (normative)
Braking tests . 96I.1 Conditions for all tests . 96I.2 Tests . 96I.2.1 Un-braked run-down time . 96I.2.2 Braked run-down time .
...