iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 877:1999/A1:2006/AC:2008

(Corrigendum)

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance

TC - Corrections or new text inserted in 3.13, 4.1.3, 4.6.3, 5.7.3.3, D.2, Table D.1, Annexes G and H and various places of Annex ZA

Rohre und Formstücke aus Gusseisen, deren Verbindungen und Zubehör zur Entwässerung von Gebäuden - Anforderungen, Prüverfahren und Qualitätssicherung

Tuyaux et raccords en fonte, leurs assemblages et accessoires destinés à l'évacuation des bâtiments - Prescriptions, méthodes d'essai et assurance qualité

Cevi, fitingi in pribor iz litega železa za hišne vodne odtoke - Zahteve, postopki preskušanja in zagotavljanje kakovosti

General Information

Status
Withdrawn
Publication Date
29-Jan-2008
Withdrawal Date
26-Oct-2021
ICS
23.040.05 - Pipeline and its parts for external sewage systems
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 203 - Cast iron pipes, fittings and their joints
Drafting Committee
CEN/TC 203/WG 3 - Soil pipelines
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
27-Oct-2021
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 877:2001/A1:2007/AC:2008 - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance

Relations

Replaced By
EN 877:2021 - Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
Effective Date
03-Nov-2021
Corrects
EN 877:1999 - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
Effective Date
08-Jun-2022

Buy Standard

EN 877:2001/A1:2007/AC:2008EN 877:2001/A1:2007/AC:2008
PreviousNext
Corrigendum
EN 877:2001/A1:2007/AC:2008
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevi, fitingi in pribor iz litega železa za hišne vodne odtoke - Zahteve, postopki preskušanja in zagotavljanje kakovostiRohre und Formstücke aus Gusseisen, deren Verbindungen und Zubehör zur Entwässerung von Gebäuden - Anforderungen, Prüverfahren und QualitätssicherungTuyaux et raccords en fonte, leurs assemblages et accessoires destinés à l'évacuation des bâtiments - Prescriptions, méthodes d'essai et assurance qualitéCast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance91.140.80Drenažni sistemiDrainage systems23.040.40Kovinski fitingiMetal fittings23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 877:1999/A1:2006/AC:2008SIST EN 877:2001/A1:2007/AC:2008en,fr01-april-2008SIST EN 877:2001/A1:2007/AC:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 877:1999/A1:2006/ACJanuary 2008Janvier 2008Januar 2008ICS 23.040.10; 23.040.40English versionVersion FrançaiseDeutsche FassungCast iron pipes and fittings, their joints and accessories for the evacuationof water from buildings - Requirements, test methods and qualityassuranceTuyaux et raccords en fonte, leursassemblages et accessoires destinés àl'évacuation des bâtiments - Prescriptions,méthodes d'essai et assurance qualitéRohre und Formstücke aus Gusseisen,deren Verbindungen und Zubehör zurEntwässerung von Gebäuden -Anforderungen, Prüverfahren undQualitätssicherungThis corrigendum becomes effective on 30 January 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 30 janvier 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 30.Januar 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 877:1999/A1:2006/AC:2008 D/E/FSIST EN 877:2001/A1:2007/AC:2008

range of products Group of products produced by one manufacturer for which the test results for one or more characteristics from any one product within the range are valid for all other products within this range.".
4.1.3 Reaction to fire In the second dash, replace the words "assembled products" with "a range" and delete the comma after the bracket to read: "  a range (including coated pipes, coated fittings and couplings) shall be tested according to EN 13823 (SBI), using the mounting adaptations given in Annex H, and shall satisfy the requirements of classification criteria and additional classifications listed in EN 13501-1 for the intended class of reaction to fire.".
4.6.3 External coatings Replace the words "the products assembled as a discharge system" with "the range" and “PCS system ext. coating” with “PCS range ext. coating” to read: " … For a classification of the range within classes E to B (see EN 13501-1, table on “classes on reaction to fire on performance for construction products excluding floorings”), each coating shall conform to the following requirements when tested in accordance to 5.7.3.3:  Ignitability: requirements of classification criteria and additional classifications listed in EN 13501-1 specific to the class. For an A2 classification of the range (see EN 13501-1, table on “classes on reaction to fire on performance for construction products excluding floorings”), the gross calorific potential of the external coatings, noted PCS range ext. coating, shall conform to the requirements of EN 13501-1 on external components when tested and calculated in accordance with 5.7.3.3:  gross calorific potential of external coatings, PCS range ext. coating:  if external coatings are substantial components, PCS range ext. coating ≤ 3 MJ/kg;  if external coatings are non-substantial components, PCS range ext. coating ≤ 4 MJ/m2.".
PCS range ext. coating, shall be calculated. The method of calculation is detailed in Annex G.".
D.2 Initial type testing Replace the word "conformance" with "conformity" to read: "Samples of prototypes (pipes, fittings, accessories and joints) for each range of DN (see Table 7) shall pass all the type tests listed in Tables 9 and 10 to demonstrate conformity with Clause 4, before production commences.".
– Range 1 per range 5.7.3.3/Annex H 4.1.3/4.6.3 ". Annex G (informative) Replace “the assembled products” with “the range” and replace twice “PCS system ext. coating” with
“PCS range ext. coating” to read:
"Method of calculation of gross calorific potential of external coatings for the range, noted PCS range ext. coating PCS range ext. coating = (0,8 × PCS pipes ext. coating) + (0,2 × PCS fitti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 598(Main)
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
oSIST prEN 598:2017

This European Standard specifies the products characteristics and associated test and assessment methods applicable to coated and lined ductile iron pipes, coated and lined fittings and joints which include (non-exhaustive list) coated and lined accessories such as collar, tees, saddles, bends, tapers, flanged socket.
Intended use: Gravity and pressure drains and sewers:
-   operating without pressure, or with positive or negative pressure;
-   installed below or above ground;
-   for conveyance of surface water, wastewater in separate systems or in combined systems.

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 877 rev(Main)
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
oSIST prEN 877:2012

This European Standard applies to cast iron pipeline components used for the construction of discharge systems for buildings and of drains, normally as gravity systems. The range of nominal sizes extends from DN 40 to DN 600 inclusive. This standard specifies the requirements for the materials, dimensions and tolerances, mechanical properties, appearance, standard coatings  and quality assurance for cast iron pipes, fittings and accessories. It also indicates performance requirements for all components, including joints.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-2:2014(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
SIST EN 1124-2:2014

This European Standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems and specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
This part of EN 1124 is only valid in connection with EN 1124 1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-4:2013(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
SIST EN 1124-4:2013

This European Standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures ) :
-   above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships;
-   inside a watertight compartment below freeboard deck;
-   with direct connection to the outboard (not permitted below freeboard deck);
-   inside tanks as long as these are not filled with foreign media and are not cargo tanks.
On well-anchored maritime structures, this European Standard applies to pipes and fittings of longitudinally welded stainless steel pipe with spigot and socket used in drainage systems in the accommodation area.
Pipes and fittings according to this European Standard may also be used in central vacuum cleaning installations, in vacuum suction lifting installations, in chip transporting installations and in other waste water and process pipes as long as the media to be discharged do not damage the components or the health and safety of the personnel.
For other pipes, this European Standard only applies if agreed with the relevant operators and following prior consultation with the manufacturer.
This European Standard contains a designation system for the different types of pipes and fittings for easy identification of each component.
This European Standard is only applicable in conjunction with EN 1124-1.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day