Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

1.1 General
This European Standard applies to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer.
This European Standard deals with significant hazards, hazardous situations and events relevant to heating boilers used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
The boilers may operate under natural draught or forced draught. The stoking may work manually or automatically.
The boilers may operate under room sealed conditions in case of supervised under pressure in the combustion chamber.
The boilers may operate in condensing condition.
NOTE This European Standard deals with boilers which are both within and outside of the scope of the Machinery
Directive 2006/42/EC.
This European Standard contains requirements and test methods for safety, combustion quality, operating characteristics, marking and maintenance of heating boilers and secondary emission reduction appliances and efficiency improvement appliances. It also covers all external equipment that influences the safety systems (e.g. back burning safety device, integral fuel hopper).
This European Standard covers only boilers that include burners as a unit. The standard applies to the combination of a boiler body with a solid fuel burner according to EN 15270 as a unit only when the whole unit is tested in accordance with this European Standard.
Heating boilers in accordance with this European Standard are designed for central heating installations where the heat carrier is water and the maximum allowable temperature is 110 °C, and which can operate at a maximum allowable operating pressure of 6 bars. For heating boilers with a built-in or attached water heater (storage or continuous flow heater), this European Standard only applies to those parts of the water heater which are necessarily subject to the operating conditions of the heating boiler (heating part).
This European Standard does not apply to:
heating boilers and other heating appliances which are also designed for the direct heating of the place of installation;
cooking appliances;
the design and construction of external fuel storage and transportation devices prior to the safety devices of the boiler;
room sealed applications above a nominal heat output > 70 kW or operated with positive pressure in the combustion chamber or operated under natural draught;
This European Standard specifies the necessary terminology for solid fuel heating boilers, the control and safety related requirements, the design requirements, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements.
This European Standard is not applicable to heating boilers which are tested before the date of its publication as an EN (European Standard).
1.2 Fuels
These boilers may burn either fossil fuels, biogenic fuels or other fuels such as peat, as specified for their use by the boiler manufacturer, in accordance with the requirements of this European Standard.
Solid fuels included in this European Standard are categorised as follows.
1.2.1 Biogenic fuels
Biomass in a natural state, in the form of:
Adaptation to new fuels standards and consideration of new fuels standards in preparation.
A log wood with moisture content w ≤ 25 %, according to EN 14961-5;
B1 chipped wood (wood chipped by machine, usually up to a maximum length of 15 cm) with moisture content from w 15 % to w 35 %, according to EN 14961-4;
B2 chipped wood as under B1, except with moisture content w > 35 %;
C1 compressed wood (e.g. pellets without additives, made of wood and/or bark particles; natural binding agents such as molasses, vegetable paraffins and starch are permitted), pellets according to EN 14961-2;
(...)

Heizkessel - Teil 5: Heizkessel für feste Brennstoffe, manuell und automatisch beschickte Feuerungen, Nennwärmeleistung bis 500 kW - Begriffe, Anforderungen, Prüfungen und Kennzeichnung

1.1 Allgemeines
Dieses Dokument ist anzuwenden für Heizkessel und deren Sicherheitseinrichtungen bis zu einer Nennwärmeleistung von 500 kW, die ausschließlich für die Verfeuerung von festen Brennstoffen vorgesehen sind und nach den mitgelieferten Anweisungen des Kesselherstellers sowie dem unter normalen Umständen vorhersehbaren Fehlanwendung betrieben werden.
Dieses Dokument ist darüber hinaus anzuwenden für mit festen Brennstoffen betriebene Kessel, die mit Verbrennungsluft von der Außenseite des Gebäudes gespeist werden, sowie für raumluftunabhängige Feuerstätten.
Dieses Dokument behandelt signifikante Gefahren, gefährliche Situationen und Ereignisse, die für Heizkessel im bestimmungsmäßigen Betrieb und unter den in der technischen Dokumentation des Kessels festgelegten Bedingungen relevant sind (siehe Abschnitt 4).
Die Heizkessel können mit Naturzug oder mit Gebläse betrieben werden. Die Brennstoffzufuhr kann von Hand oder automatisch erfolgen. Der Kessel kann nicht-kondensierend oder kondensierend betrieben werden.
ANMERKUNG 1 Dieses Dokument behandelt Kessel, die im Anwendungsbereich der Maschinenrichtlinie 2006/42/EG oder nicht im Anwendungsbereich der Maschinenrichtlinie 2006/42/EG liegen (manuell beschickter Kessel ohne Gebläse).
ANMERKUNG 2 Es besteht das Risiko, dass Kondensat bei niedrigen Temperaturen im Kondensatablass gefriert.
Dieses Dokument enthält Anforderungen und Prüfverfahren für die Sicherheit, die Verbrennungsleistung, das Betriebsverhalten, die Kennzeichnung und die Wartung von Heizkesseln. Darüber hinaus behandelt die Norm die gesamte externe Ausrüstung, die Einfluss auf die Sicherheitssysteme hat (z. B. Rückbrand-Schutzeinrichtung, integrierter Brennstoffvorratsbehälter).
Dieses Dokument betrachtet nur Heizkessel mit Brennern im Verbund als Gesamteinheit. Das Dokument ist nur auf eine Kombination aus Kesselkörper und einem Brenner entsprechend EN 15270:2007 anwendbar, wenn die Gesamteinheit nach dem vorliegenden Dokument geprüft wird.
Heizkessel nach diesem Dokument sind für die Beheizung von zentralen Heizungsanlagen bestimmt, deren Wärmeträger Wasser mit einer maximal zulässigen Temperatur von 110 °C ist und die mit einem maximal zulässigen Betriebsdruck von 6 bar betrieben werden können. Bei Heizkesseln mit eingebautem oder einem angebautem Wassererwärmer (Speicher- oder Durchlaufwassererwärmer) ist dieses Dokument nur für die Bauteile des Wassererwärmers anzuwenden, die zwangsläufig den Betriebsbedingungen des Heizkessels unterliegen (Heizungsteil).
Dieses Dokument ist nicht anzuwenden für:
- Heizkessel und andere Heizgeräte, die auch zur direkten Beheizung des Aufstellraums konstruiert sind, auch nach der Europäischen Verordnung 2015/1185/EU;
- Kochgeräte;
- Auslegung und Konstruktion von externen Brennstofflagern und Beschickungs¬einrichtungen vor den Sicherheitseinrichtungen des Heizkessels;
- manuell beschickte Strohballen-Heizkessel;
- KWK Geräte (Kraft-Wärme-Kopplung).
Dieses Dokument legt die für Heizkessel für feste Brennstoffe notwendigen Begriffe, die regelungs- und sicherheitstechnischen Anforderungen, die Bauanforderungen, die heiztechnischen Anforderungen (unter Berücksichtigung der Umweltanforderungen) und deren Prüfungen sowie die Kennzeichnung fest.
[...]

Chaudières de chauffage - Partie 5 : Chaudières spéciales pour combustibles solides, à chargement manuel et automatique, puissance utile inférieure ou égale à 500 kW - Définitions, exigences, essais et marquage

1.1 Généralités
Le présent document s’applique aux chaudières de chauffage, y compris aux dispositifs de sécurité, ayant une puissance utile nominale inférieure ou égale à 500 kW, qui sont conçues pour la combustion de combustibles solides uniquement et qui sont mises en œuvre conformément aux instructions fournies avec la chaudière et au mauvais usage raisonnablement prévisible défini par le constructeur.
Le présent document s'applique également aux chaudières à combustibles solides prélevant l'air de combustion à l'extérieur du bâtiment et aux appareils à circuit étanche.
Le présent document traite des phénomènes dangereux, situations dangereuses et événements dangereux significatifs se rapportant aux chaudières de chauffage utilisées comme il se doit et selon les conditions définies dans la documentation technique de la chaudière (voir Article 4).
Les chaudières peuvent être à tirage naturel ou forcé. L'alimentation de combustible peut être manuelle ou automatique. Les chaudières peuvent fonctionner en ou sans condensation.
NOTE 1 Le présent document traite des chaudières qui sont couvertes par le domaine d'application de la Directive Machines 2006/42/CE et les chaudières qui ne sont pas couvertes par le domaine d'application de la Directive Machines 2006/42/CE (chaudière à tirage naturel à chargement manuel).
NOTE 2 Il existe un risque de gel des condensats lors de l'évacuation des condensats à basse température.
Le présent document contient des exigences et méthodes d'essai relatives à la sécurité, à la combustion, à la performance, aux caractéristiques de fonctionnement, au marquage et à la maintenance des chaudières de chauffage. Elle couvre également tout équipement externe qui influence les systèmes de sécurité (par exemple dispositif de sécurité contre un retour de flamme, trémie à combustible intégrée).
Le présent document ne couvre que les chaudières intégrant des brûleurs comme une unité thermique. Le document s'applique à l'association d'un corps de chaudière avec un brûleur de combustibles solides conformément à l'EN 15270:2007 sous forme d'une unité thermique uniquement lorsque cette association est soumise à essai conformément au présent document.
Les chaudières conformes au présent document sont conçues pour des installations de chauffage central dont le fluide caloporteur est l'eau, avec une température maximale admissible de 110 °C (limiteur de température de sécurité) et une pression hydraulique maximale de service admissible de 6 bars. Pour des chaudières à production d'eau chaude par ballon ou échangeurs noyés ou juxtaposés (par accumulation ou à production instantanée), le présent document ne s'applique qu'aux éléments du système de production d'eau chaude qui sont soumis aux conditions de fonctionnement de la partie chauffage de la chaudière.
[...]

Kotli za gretje - 5. del: Kotli na trdna goriva z ročnim in samodejnim polnjenjem z nazivno močjo do 500 kW - Terminologija, zahteve, preskušanje in označevanje

General Information

Status
Withdrawn
Publication Date
06-Apr-2021
Withdrawal Date
08-Nov-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Nov-2022

Relations

Buy Standard

Standard
EN 303-5:2021
English language
98 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 303-5:2018
English language
95 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 303-5:2021
01-julij-2021
Nadomešča:
SIST EN 303-5:2012
Kotli za gretje - 5. del: Kotli na trdna goriva z ročnim in samodejnim polnjenjem z
nazivno močjo do 500 kW - Terminologija, zahteve, preskušanje in označevanje
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically
stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and
marking
Heizkessel - Teil 5: Heizkessel für feste Brennstoffe, manuell und automatisch beschickte
Feuerungen, Nennwärmeleistung bis 500 kW - Begriffe, Anforderungen, Prüfungen und
Kennzeichnung
Chaudières de chauffage - Partie 5 : Chaudières spéciales pour combustibles solides, à
chargement manuel et automatique, puissance utile inférieure ou égale à 500 kW -
Définitions, exigences, essais et marquage
Ta slovenski standard je istoveten z: EN 303-5:2021
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
SIST EN 303-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 303-5:2021

---------------------- Page: 2 ----------------------
SIST EN 303-5:2021


EN 303-5
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2021
EUROPÄISCHE NORM
ICS 91.140.10 Supersedes EN 303-5:2012
English Version

Heating boilers - Part 5: Heating boilers for solid fuels,
manually and automatically stoked, nominal heat output of
up to 500 kW - Terminology, requirements, testing and
marking
Chaudières de chauffage - Partie 5 : Chaudières Heizkessel - Teil 5: Heizkessel für feste Brennstoffe,
spéciales pour combustibles solides, à chargement manuell und automatisch beschickte Feuerungen,
manuel et automatique, puissance utile inférieure ou Nennwärmeleistung bis 500 kW - Begriffe,
égale à 500 kW - Définitions, exigences, essais et Anforderungen, Prüfungen und Kennzeichnung
marquage
This European Standard was approved by CEN on 15 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 303-5:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 303-5:2021
EN 303-5:2021 (E)
Contents Page
European foreword . 5
Introduction . 7
1 Scope . 8
1.1 General . 8
1.2 Fuels . 9
2 Normative references . 10
3 Terms and definitions . 13
4 Requirements . 20
4.1 General requirements .
...

SLOVENSKI STANDARD
oSIST prEN 303-5:2018
01-april-2018
.RWOL]DJUHWMHGHO.RWOLQDWUGQDJRULYD]URþQLPLQVDPRGHMQLPSROQMHQMHP]
LPHQVNRPRþMRGRN:7HUPLQRORJLMD]DKWHYHSUHVNXãDQMHLQR]QDþHYDQMH
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically
stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and
marking
Heizkessel - Teil 5: Heizkessel für feste Brennstoffe, manuell und automatisch
beschickte Feuerungen, Nennwärmeleistung bis 500 kW - Begriffe, Anforderungen,
Prüfungen und Kennzeichnung
Chaudières de chauffage - Partie 5 : Chaudières spéciales pour combustibles solides, à
chargement manuel et automatique, puissance utile inférieure ou égale à 500 kW -
Définitions, exigences, essais et marquage
Ta slovenski standard je istoveten z: prEN 303-5
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
oSIST prEN 303-5:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 303-5:2018

---------------------- Page: 2 ----------------------
oSIST prEN 303-5:2018


DRAFT
EUROPEAN STANDARD
prEN 303-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2018
ICS 91.140.10 Will supersede EN 303-5:2012
English Version

Heating boilers - Part 5: Heating boilers for solid fuels,
manually and automatically stoked, nominal heat output of
up to 500 kW - Terminology, requirements, testing and
marking
Chaudières de chauffage - Partie 5 : Chaudières Heizkessel - Teil 5: Heizkessel für feste Brennstoffe,
spéciales pour combustibles solides, à chargement manuell und automatisch beschickte Feuerungen,
manuel et automatique, puissance utile inférieure ou Nennwärmeleistung bis 500 kW - Begriffe,
égale à 500 kW - Définitions, exigences, essais et Anforderungen, Prüfungen und Kennzeichnung
marquage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 57.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 303-5:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 303-5:2018
prEN 303-5:2018 (E)
Contents Page
European foreword . 5
Introduction . 7
1 Scope . 8
1.1 General . 8
1.2 Fuels . 9
2 Normative references . 9
3 Terms and defini
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.