iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 13828

(Main)

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements

This document applies primarily to copper alloy and stainless steel ball valves with dimensions DN 6 to DN 100, for installations in buildings for potable water supply up to PN16 and a maximum distribution temperature of 65 °C. Occasional excursions up to 90 °C are permitted for a period of 1 h maximum.
The ball valves are classified by their nominal pressure being either PN10 or PN16.
This document specifies:
- the requirements of the materials and the design of ball valves;
- the mechanical, hydraulic and acoustic requirements of ball valves;
- the test methods to verify the requirements of ball valves;
- the marking requirements of ball valves.

Gebäudearmaturen - Handbetätigte Kugelhähne aus Kupferlegierungen und nicht rostenden Stählen für Trinkwasseranlagen in Gebäuden - Prüfungen und Anforderungen

Diese Europäische Norm gilt vorwiegend für Kugelhähne aus Kupferlegierungen und Edelstahl der Nennweiten DN 6 bis DN 100 für Installationen zur Trinkwasserversorgung in Gebäuden bis PN16 und eine höchste Verteilungstemperatur von 65 °C. Zeitweilige Abweichungen bis 90 °C sind für die Dauer von höchstens 1 h zulässig.
Die Kugelhähne werden nach ihrem Nenndruck, entweder PN10 oder PN16, klassifiziert.
Diese Europäische Norm legt fest:
- die Anforderungen an die Werkstoffe und die Konstruktion von Kugelhähnen,
- die mechanischen und hydraulischen Anforderungen sowie die Anforderungen an das Geräuschverhalten von Kugelhähnen,
- die Prüfverfahren, mit denen die Erfüllung der Anforderungen an Kugelhähne nachgewiesen wird,
die Anforderungen an die Kennzeichnung von Kugelhähnen.

Robinetterie de bâtiment - Robinets d’arrêt à tournant sphérique actionnés à la main en alliage de cuivre et en acier inoxydable pour la distribution d’eau potable dans les bâtiments - Essais et exigences

Le présent document s’applique principalement aux robinets d’arrêt à tournant sphérique en alliage de cuivre et en acier inoxydable, de diamètre compris entre DN 6 et DN 100, destinés à être installés dans les bâtiments pour la distribution d’eau potable jusqu’à PN 16 et à une température maximale de distribution de 65 °C. Des écarts de température occasionnels jusqu’à 90 °C sont autorisés pendant une durée maximum de 1 h.
Les robinets d’arrêt à tournant sphérique sont classés selon leur pression nominale, à savoir PN 10 ou PN 16.
Le présent document spécifie :
- les exigences relatives aux matériaux et à la conception des robinets d’arrêt à tournant sphérique ;
- les exigences mécaniques, hydrauliques et acoustiques applicables aux robinets d’arrêt à tournant sphérique ;
- les méthodes d’essai permettant de vérifier le respect des exigences applicables aux robinets d’arrêt à tournant sphérique ;
- les exigences de marquage applicables aux robinets d’arrêt à tournant sphérique.

Ventili v stavbah - Ročni krogelni ventili iz bakrene zlitine in krogelni ventili iz nerjavnega jekla za oskrbo s pitno vodo v stavbah - Preskusi in zahteve

General Information

Status
Not Published
Publication Date
11-Dec-2024
ICS
23.060.20 - Ball and plug valves
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164/WG 14 - Valves and fitting for buildings and devices to prevent pollution by backflow
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
27-Apr-2023
Due Date
19-Oct-2023
Completion Date
27-Apr-2023
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Ref Project
oSIST prEN 13828:2023 - Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements

Relations

Revises
EN 13828:2003 - Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
Effective Date
22-Sep-2021

Buy Standard

prEN 13828:2023prEN 13828:2023
PreviousNext
Draft
prEN 13828:2023
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13828:2023
01-april-2023
Ventili v stavbah - Ročni krogelni ventili iz bakrene zlitine in krogelni ventili iz
nerjavnega jekla za oskrbo s pitno vodo v stavbah - Preskusi in zahteve
Building valves - Manually operated copper alloy and stainless steel ball valves for
potable water supply in buildings -Tests and requirements
Gebäudearmaturen - Handbetätigte Kugelhähne aus Kupferlegierungen und nicht
rostenden Stählen für Trinkwasseranlagen in Gebäuden - Prüfungen und Anforderungen
Robinetterie de bâtiment - Robinets d’arrêt à tournant sphérique actionnés à la main en
alliage de cuivre et en acier inoxydable pour la distribution d’eau potable dans les
bâtiments - Essais et exigences
Ta slovenski standard je istoveten z: prEN 13828
ICS:
23.060.20 Zapirni ventili (kroglasti in Ball and plug valves
pipe)
91.140.60 Sistemi za oskrbo z vodo Water supply systems
oSIST prEN 13828:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13828:2023

---------------------- Page: 2 ----------------------
oSIST prEN 13828:2023


DRAFT
EUROPEAN STANDARD
prEN 13828
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2023
ICS 23.060.20 Will supersede EN 13828:2003
English Version

Building valves - Manually operated copper alloy and
stainless steel ball valves for potable water supply in
buildings - Tests and requirements
Robinetterie de bâtiment - Robinets d'arrêt à tournant Gebäudearmaturen - Handbetätigte Kugelhähne aus
sphérique actionnés à la main en alliage de cuivre et en Kupferlegierungen und nicht rostenden Stählen für
acier inoxydable pour la distribution d'eau potable Trinkwasseranlagen in Gebäuden - Prüfungen und
dans les bâtiments - Essais et exigences Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13828:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13828:2023
prEN 13828:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Designation. 7
5 Design characteristics . 8
5.1 Materials .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1213:1999(Main)
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
SIST EN 1213:2000

The purpose of this Standard EN 1213 is to specify: - the requirements for the materials and the design of stopvalves; - the mechanical, hydraulic and acousticrequirements ; - the test methods; - the marking requirements; for copper alloy stopvalves for use with drinking water supply in buildings. This standard applies primarily to copper alloy stopvalves, dimensions DN 10 to DN 100, for potable water supply in buildings up to PN 10 and a distribution temperature of 65°C. Occasional excursions up to 95°C are permitted for a period of 1 hr. maximum.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15714-3:2022(Main)
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
SIST EN 15714-3:2023

This document specifies basic requirements for pneumatic part-turn valve actuators, both double acting and single acting, used for on-off and modulating control duties.
It includes guidelines, recommendations and methods for enclosure and corrosion protection, control and testing.
It does not apply to pneumatic actuators which are integral parts of control valves and to pneumatic actuators designed for permanent immersion in fresh or sea water.
Other requirements, or conditions of use, different from those indicated in this document, are expected to be subject to negotiations, between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15714-6:2022(Main)
Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
SIST EN 15714-6:2022

This document specifies basic requirements for piston type hydraulic linear actuators for industrial valve, both double acting and single acting, used for on-off and modulating control duties. It includes criteria, method and guidelines for design, qualification, corrosion protection, control and testing.
It does not apply to hydraulic actuators which are integral parts of control valves. Other requirements, or conditions of use, different from those indicated in this document, are expected to be subject to negotiations, between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15714-5:2022(Main)
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
SIST EN 15714-5:2022

This document provides basic requirements for piston type pneumatic linear actuators for industrial valve, both double acting and single acting, used for on-off and modulating control duties.
It includes criteria, method and guidelines for design, qualification, corrosion protection, control and testing.
It does not apply to diaphragm actuators and to pneumatic actuators which are integral parts of control valves.
Other requirements, or conditions of use, different from those indicated in this document, are subject to agreement, between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16135:2006/A1:2019(Amendment)
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
SIST EN ISO 16135:2006/A1:2019
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 331:2015(Main)
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
SIST EN 331:2016

1.1 This European Standard specifies the characteristics for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking provisions.
It applies to metallic valves not directly buried for domestic and commercial installations inside or outside of buildings, using gases of the first, second and third family (specified in EN 437) and working up to 0,2 × 105 Pa, 0,5 × 105 Pa, 1 × 105Pa, 5 × 105 Pa and 20 × 105Pa and with temperature limits from -5 °C or −20 °C to + 60 °C.
NOTE   "Not directly buried" within the context of this standard means that valves below ground are not in direct contact with earth or other materials e.g. that they are in a protected encasement.
1.2 Valve nominal sizes (DN) covered by this European Standard are as follows: 6, 8, 10, 12, 15, 20, 25, 32, 40, 50, 65, 80, 100.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17292:2015(Main)
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
SIST EN ISO 17292:2016

ISO 17292:2015 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications.
It covers valves of the nominal sizes DN:
-      8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600;
corresponding to nominal pipe sizes NPS:
-      ¼, ⅜, ½, , 1, 1 ¼, 1 ½, 2, 2 ½, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24;
and applies for pressure designations:
-      Class 150; 300; 600; 800 (Class 800 applies only for valves with threaded and socket welding end);
-      PN 16, 25, 40, 63, 100.
It includes provisions for testing and inspection and for valve characteristics as follows:
-      flanged and butt-welded ends, in sizes 15 ≤ DN ≤ 600 (½ ≤ NPS ≤ 24);
-      socket welding and threaded ends, in sizes 8 ≤ DN ≤ 50 (¼ ≤ NPS ≤ 2);
-      body seat openings designated as full bore, reduced bore, and double reduced bore;
-      materials.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13547:2013(Main)
Industrial valves - Copper alloy ball valves
SIST EN 13547:2014

This European Standard applies to copper alloy ball valves for general use having, flanged, threaded, capillary or compression or loose nut/union body ends.
This European Standard does not apply to copper alloy ball valves for drinking water applications.
This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings for the shell and body seats, dimensions, test procedures and marking.
For some specific fields of application, for example gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required.
The range of nominal sizes is DN 6 to DN 300 and of nominal diameters 6 mm to 110 mm.
The range of pressure designations covered is PN 6 ; PN 10 ; PN 16 ; PN 20 ; PN 25 ; PN 32 ; PN 40 ; PN 63 ; Class 150 and Class 300.
For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1983:2013(Main)
Industrial valves - Steel ball valves
SIST EN 1983:2014

This European Standard specifies requirements for industrial steel ball valves having flanged, threaded, socket welding or butt welding ends.
The DN range is:
-   DN 4 ; DN 6 ; DN 8 ; DN 10 ; DN 15 ; DN 20 ; DN 25 ; DN 32 ; DN 40 ; DN 50 ; DN 65 ; DN 80 ; DN 100 ; DN 125 ; DN 150 ; DN 200 ; DN 250 ; DN 300 ; DN 350 ; DN 400 ; DN 450 ; DN 500 ; DN 550 ; DN 600 ; DN 650 ; DN 700 ; DN 750 ; DN 800 ; DN 850 ; DN 900.
The PN and Class ranges are:
-   PN 6 ; PN 10 ; PN 16 ; PN 25 ; PN 40 ; PN 63 ; PN 100 ;
-   Class 150 ; Class 300 ; Class 600 ; Class 900 ; Class 1 500 ; Class 2 500 ; Class 4 500.
This European Standard applies to steel ball valves mainly used for industrial and general purpose applications. However, they can be used for other applications provided the requirements of the relevant performance standard are met.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13082:2008+A1:2012(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
SIST EN 13082:2009+A1:2012

This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor.
This European Standard specifies the performance requirements and the critical dimensions of the vapour transfer valve. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day