Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002)

This International Standard specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip. This International Standard also specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,3 mm to 8,0 mm and in rolling widths from 600 mm to 2 100 mm. It also applies to slit cold-rolled wide strip in widths less than 600 mm manufactured from wide strip by longitudinal slitting and to cut lengths manufactured from such strip.

Kontinuierlich gewalztes Kaltband, Kaltbreitband, Blech und Kaltband in Stäben aus nichtrostenden Stählen - Grenzabmaße und Formtoleranzen (ISO 9445:2002)

1.1   Diese Internationale Norm legt die Grenzabmaße und Formtoleranzen fest für kontinuierlich gewalztes Kaltband aus nichtrostenden Stählen, in Dicken bis einschließlich 3 mm und in Walzbreiten kleiner als
600 mm. Sie gilt auch für Kaltband in Stäben.
1.2   Diese Internationale Norm legt auch die Grenzabmaße und Formtoleranzen fest für kontinuierlich gewalztes Kaltbreitband und Blech aus nichtrostenden Stählen, in Dicken von 0,3 mm bis 8,0 mm und in Walzbreiten von 600 mm bis 2100 mm. Sie gilt auch für längsgeteiltes Kaltbreitband in Breiten unter 600 mm hergestellt aus Kaltbreitband durch Längsteilen und für Stäbe aus diesen Erzeugnissen.

Feuillards, larges bandes, tôles et feuillards coupés à longueur en acier inoxydable laminés à froid en continu - Tolérances sur les dimensions et la forme (ISO 9445:2002)

Kontinuirno hladno valjani ozki trakovi, široki trakovi, pločevine iz nerjavnih jekel in rezane dolžine – Mejni odstopki mer in tolerance oblik (ISO 9445:2002)

General Information

Status
Withdrawn
Publication Date
28-Feb-2006
Withdrawal Date
02-Mar-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Mar-2010
Completion Date
03-Mar-2010

Relations

Buy Standard

Standard
EN ISO 9445:2006
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9445:2004
German language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9445:2006
01-maj-2006
1DGRPHãþD
SIST EN 10258:1998
SIST EN 10259:1998
.RQWLQXLUQRKODGQRYDOMDQLR]NLWUDNRYLãLURNLWUDNRYLSORþHYLQHL]QHUMDYQLKMHNHO
LQUH]DQHGROåLQH±0HMQLRGVWRSNLPHULQWROHUDQFHREOLN ,62
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut
lengths - Tolerances on dimensions and form (ISO 9445:2002)
Kontinuierlich gewalztes Kaltband, Kaltbreitband, Blech und Kaltband in Stäben aus
nichtrostenden Stählen - Grenzabmaße und Formtoleranzen (ISO 9445:2002)
Feuillards, larges bandes, tôles et feuillards coupés a longueur en acier inoxydable
laminés a froid en continu - Tolérances sur les dimensions et la forme (ISO 9445:2002)
Ta slovenski standard je istoveten z: EN ISO 9445:2006
ICS:
77.140.20 Visokokakovostna jekla Stainless steels
77.140.50 3ORãþDWLMHNOHQLL]GHONLLQ Flat steel products and semi-
SROL]GHONL products
SIST EN ISO 9445:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9445:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 9445:2006


EUROPEAN STANDARD EN ISO 9445

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2006
ICS 77.140.20; 77.140.50 Supersedes EN 10258:1997 and EN 10259:1997
English Version
Continuously cold-rolled stainless steel narrow strip, wide strip,
plate/sheet and cut lengths - Tolerances on dimensions and
form (ISO 9445:2002)
Feuillards, larges bandes, tôles et feuillards coupés à Kontinuierlich gewalztes Kaltband, Kaltbreitband, Blech und
longueur en acier inoxydable laminés à froid en continu - Kaltband in Stäben aus nichtrostenden Stählen -
Tolérances sur les dimensions et la forme (ISO 9445:2002) Tolerances on dimensions and form (ISO 9445:2002)
This European Standard was approved by CEN on 6 February 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9445:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9445:2006
EN ISO 9445:2006 (E)



Foreword

The text of ISO 9445:2002 has been prepared by Technical Committee ISO/TC 17 "Steel” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO
9445:2006 by Technical Committee ECISS/TC 23 "Steels for heat treatment, alloy steels and
free-cutting steels - Qualities and dimensions", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2006, and conflicting
national standards shall be withdrawn at the latest by September 2006.

This document supersedes EN 10258:1997 and EN 10259:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 9445:2002 has been approved by CEN as EN ISO 9445:2006 without any
modifications.


2

---------------------- Page: 4 ----------------------

SIST EN ISO 9445:2006


INTERNATIONAL ISO
STANDARD 9445
Second edition
2002-11-01


Continuously cold-rolled stainless steel
narrow strip, wide strip, plate/sheet and cut
lengths — Tolerances on dimensions and
form
Feuillards, larges bandes, tôles et feuillard
...

SLOVENSKI OSIST prEN ISO 9445:2004

PREDSTANDARD
september 2004
Kontinuirno hladno valjani ozki trakovi, široki trakovi, pločevine iz nerjavnih
jekel in razrezi - Mejni odstopki mer in tolerance oblik (ISO 9445:2002)
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut
lengths - Tol
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.