EN 295-2:2013
(Main)Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
This European Standard specifies requirements for the evaluation of conformity of products manufactured from vitrified clay and other materials (referred to as "products") specified in the following standards:
- pipes, fittings and joints according to EN 295-1;
- adapters, connectors and flexible couplings according to EN 295-4;
- perforated pipes and fittings according to EN 295-5;
- components of manholes and inspection chambers according to EN 295-6; and
- pipes and joints for pipe jacking according to EN 295-7.
Steinzeugrohrsysteme für Abwasserleitungen und -kanäle - Teil 2: Bewertung der Konformität und Probenahme
Diese Europäische Norm legt Anforderungen für die Konformitätsbewertung von Erzeugnissen aus Steinzeug und anderen Werkstoffen (bezeichnet als „Produkte“) fest, die in den folgenden Normen festgelegt sind:
- Rohre, Formstücke und Verbindungen nach EN 295 1;
- Übergangs- und Anschlussbauteile und flexible Kupplungen nach EN 295 4;
- gelochte Rohre und Formstücke nach EN 295 5;
- Bauteile für Einsteig- und Inspektionsschächte nach EN 295 6; und
- Rohre und Verbindungen für Rohrvortrieb nach EN 295 7.
Systèmes de tuyaux en grès vitrifié pour les collecteurs d'assainissement et les branchements - Partie 2: Évaluation de la conformité et échantillonnage
La présente Norme européenne spécifie les exigences pour l'évaluation de la conformité des produits
fabriqués à partir de grès vitrifié et d'autres matériaux (appelés les « produits ») spécifiés dans les normes
suivantes :
⎯ tuyaux, accessoires et joints conformes au prEN 295-1,
⎯ adaptateurs, raccords et manchons souples conformes au prEN 295-4,
⎯ tuyaux perforés et accessoires conformes au prEN 295-5,
⎯ éléments de regards et de chambres de visite conformes au prEN 295-6 et
⎯ tuyaux et joints destinés au fonçage conformes au prEN 295-7.
Keramični cevni sistemi za odvod odpadne vode in kanalizacijo - 2. del: Vrednotenje skladnosti in vzorčenje
Ta evropski standard določa zahteve za vrednotenje skladnosti izdelkov, proizvedenih iz keramike in drugih materialov (v nadaljnjem besedilu: izdelki), opredeljenih v naslednjih standardih:
– cevi, fazonski kosi in spoji v skladu s standardom EN 295-1;
– adapterji, priključki in prožne spojke v skladu s standardom EN 295-4;
– drenažne cevi in fazonski kosi v skladu s standardom EN 295-5;
– sestavni deli vstopnih in revizijskih jaškov v skladu s standardom EN 295-6 ter
– cevi in spoji za potisne cevi v skladu s standardom EN 295-7.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steinzeugrohrsysteme für Abwasserleitungen und -kanäle - Teil 2: Bewertung der Konformität und ProbenahmeSystèmes de tuyaux et accessoires en grès pour les réseaux de branchement et d’assainissement - Partie 2: Evaluation de la conformité et échantillonnageVitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling93.030Zunanji sistemi za odpadno vodoExternal sewage systems91.140.80Drenažni sistemiDrainage systems23.040.50Cevi in fitingi iz drugih materialovPipes and fittings of other materialsICS:Ta slovenski standard je istoveten z:EN 295-2:2013SIST EN 295-2:2013en,fr,de01-maj-2013SIST EN 295-2:2013SLOVENSKI
STANDARDSIST EN 295-2:1996/A1:2000SIST EN 295-2:1996SIST EN 295-10:20051DGRPHãþD
SIST EN 295-2:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 295-2
February 2013 ICS 93.030 Supersedes EN 295-10:2005, EN 295-2:1991English Version
Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
Systèmes de tuyaux et accessoires en grès pour les réseaux de branchement et d'assainissement - Partie 2: Evaluation de la conformité et échantillonnage
Steinzeugrohrsysteme für Abwasserleitungen und -kanäle -Teil 2: Bewertung der Konformität und Probenahme This European Standard was approved by CEN on 1 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 295-2:2013: ESIST EN 295-2:2013
EN 295-2:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Abbreviations . 5 5 Evaluation of conformity. 5 5.1 General . 5 5.2 Initial type testing (ITT) and type testing (TT) . 6 5.2.1 General . 6 5.2.2 Sampling procedure . 6 5.2.3 Test reports . 11 5.3 Factory production control (FPC) . 12 5.3.1 General . 12 5.3.2 Requirements . 12 5.3.3 Equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.