Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods

This European Standard specifies the requirements for container shells for mobile waste containers with a capacity up to 1 700 l covered by EN 840-1 to EN 840-4.
This European Standard specifies the general performance characteristics of such shells as well as the test methods, and gives recommendations for installation.

Abfallbehälterschränke für fahrbare Abfallsammelbehälter mit einem Nennvolumen bis 1 700 l - Anforderungen an die Ausführung und Prüfverfahren

Diese Europäische Norm legt die Anforderungen an Abfallbehälterschränke für fahrbare Abfallsammelbehälter mit einem Nennvolumen bis 1700 l nach EN 840-1 bis EN 840-4 fest.
Diese Europäische Norm legt die allgemeinen Leistungsmerkmale für derartige Schränke sowie die Prüfverfahren fest und gibt Empfehlungen für die Aufstellung.

Abris pour conteneurs roulants à déchets de capacité inférieure ou égale à 1 700 l - Exigences de performance et méthodes d'essai

La présente Norme européenne spécifie les exigences relatives aux abris pour conteneurs roulants à déchets de capacité inférieure ou égale à 1 700 l relevant de l’EN 840-1 à l’EN 840-4.
La présente Norme européenne indique les caractéristiques générales de performance de ces abris ainsi que les méthodes d’essai applicables et donne des recommandations concernant leur installation.

Ohišja premičnih zabojnikov za odpadke s prostornino do 1700 l – Izvedbene zahteve in preskusne metode

General Information

Status
Published
Publication Date
12-Sep-2006
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Due Date
15-Jul-2021
Completion Date
15-Jul-2021

Buy Standard

Standard
EN 15132:2007
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods,]YHGEHQHAbris pour conteneurs roulants a déchets de capacité inférieure ou égale a 1 700 l - Exigences de performance et méthodes d'essaiAbfallbehälterschränke für fahrbare Abfallsammelbehälter mit einem Nennvolumen bis 1 700 l - Anforderungen an die Ausführung und PrüfverfahrenTa slovenski standard je istoveten z:EN 15132:2006SIST EN 15132:2007en;fr;de13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:SLOVENSKI

STANDARDSIST EN 15132:200701-april-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15132September 2006ICS 13.030.40 English VersionContainer shells for mobile waste containers with a capacity upto 1 700 l - Performance requirements and test methodsAbris pour conteneurs roulants à déchets de capacitéinférieure ou égale à 1 700 l - Exigences de performance etméthodes d'essaisAbfallbehälterschränke für fahrbare Abfallsammelbehältermit einem Nennvolumen bis 1 700 l - Anforderungen an dieAusführung und PrüfverfahrenThis European Standard was approved by CEN on 6 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15132:2006: E

EN 15132:2006 (E) 2 Contents Page Foreword..............................................................................................................................................................3 1 Scope......................................................................................................................................................4 2 Normative references............................................................................................................................4 3 Terms and definitions...........................................................................................................................4 4 General requirements............................................................................................................................5 5 Tests........................................................................................................................................................5 6 Test report............................................................................................................................................10 7 Data sheet.............................................................................................................................................10 8 Marking and user information............................................................................................................10 9 Additional recommendations.............................................................................................................10 Annex A (normative)

Weathering test.............................................................................................................12 Bibliography......................................................................................................................................................13

EN 15132:2006 (E) 3 Foreword This document (EN 15132:2006) has been prepared by Technical Committee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2007, and conflicting national standards shall be withdrawn at the latest by March 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EN 15132:2006 (E) 4

1 Scope This European Standard specifies the requirements for container shells for mobile waste containers with a capacity up to 1 700 l covered by EN 840-1 to EN 840-4. This European Standard specifies the general performance characteristics of such shells as well as the test methods, and gives recommendations for installation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 105-B02, Textiles - Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) EN ISO 877, Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) EN ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps (ISO 4892-2:2006) EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227:2006) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 mobile waste container appropriately designed container fitted with wheels intended to temporarily store waste

3.2 container shell equipment used as street furniture for housing mobile waste container

3.3 ground level level where the user is standing while filling the container shell

3.4 loading height vertical distance between the base of the container shell and the bottom of the shell’s filling aperture(s)

3.5 total height vertical distance between the ground level and the highest point of the container shell

3.6 clearance empty area from the container shell walls to the waste container

EN 15132:2006 (E) 5 4 General requirements Any construction material of the container shell shall allow the conformity of the shell with the tests of this European Standard. If different construction materials are used, they shall prevent any reciprocal incompatibility (i.e. chemical interaction) that could damage them. All parts of the container shell with which the user may be in contact shall prevent any risk of injury: obvious aggressivity of external surfaces, sharp edges (edges with a radius more than 1,4 mm are considered as sharp edges), pinching risks etc. Self locking doors and hatches shall allow the opening from inside. The interior of the container shell shall not be able to retain wastes or cause obstruction for cleaning and disinfecting. It shall also be designed in order to resist damage from interior impacts due to handling of containers into the container shell. Installation conditions may require sealing devices. The bottom edge of the shell’s door(s) shall be at least 30 mm above the ground level on which the waste containers are moved. Loading height shall not exceed 1,70 m. The container shell shall be designed so that the hatches (if present) shall not remain opened after use. To locate the waste container in the container shell, a minimum clearance shall be respected between container shell and the dimensions of waste containers to be used as defined in the relevant parts 1 to 4 of EN 840. For 4-wheeled containers, this clearance shall be minimum 150 mm. For 2-wheeled containers, the clearance shall be minimum 15 mm. Upper free space shall allow the tilting of the container according to the instructions of the manufacturer. The clearance shall be considered between the maximum dimensions of used waste containers and the closest wall, face of the container shell, other waste container in case of multiple container shell etc. 5 Tests 5.1 General Results from the test shall be noted in the test report. 5.2 Stability test 5.2.1 Requirement The aim of the stability test is to check the resistance of the container shell to resist without tipping over to efforts from the wind or any other action. By test according to 5.2.2 the container shell shall resist to an effort of 2,5 kN without tipping over. Deformation or beginning of ruptures are not allowed on sealing devices when present or any other part of the container shell.

EN 15132:2006 (E) 6 5.2.2 Procedure The equipment shall consist of the following:  a device that allows a pulling effort with a rate of less than 1 kN/s;  a textile strap of 100 mm wide to transmit the force without causing any marking;  a flat surface to accommodate the whole base of the container shell. The container shell shall be placed on the flat surface. If it is the case, the container shell shall be fastened in a way to be representative of the sealing manufacturer’s instructions. The pulling effort shall be progressively put into effect up to a predetermined value, at a height of two third of the total height of the container shell. The test shall be carried out on the most penalising face. In any doubt, the test should be carried out in several positions. 5.3 Resistance of the functionality of the door(s) 5.

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.