EN ISO 7823-2:2003

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)

ISO 7823-2:2003 specifies requirements for flat poly(methyl methacrylate) (PMMA) sheets extruded from colourless or coloured, transparent, translucent or opaque materials.
The thickness range of the sheets covered by this part of ISO 7823 is 1,5 mm to 20 mm.

Kunststoffe - Tafeln aus Polymethylmethacrylat - Typen, Maße und Eigenschaften - Teil 2: Extrudierte Tafeln (ISO 7823-2:2003)

Dieser Teil der ISO 7823 legt die Anforderungen an flache, extrudierte Polymethylmethacrylat (PMMA-)Tafeln aus farblosen und eingefärbten, durchsichtigen, durchscheinenden und undurchsichtigen Lieferformen dieses Materials, wie in 3.1 definiert, fest.
Der Dickenbereich der in diesem Teil der ISO 7823 behandelten Tafeln beträgt 1,5 mm bis 20 mm.

Plastiques - Plaques en poly(méthacrylate de méthyle) - Types, dimensions et caractéristiques - Partie 2: Plaques extrudées (ISO 7823-2:2003)

L'ISO 7823-2:2003 fixe des exigences relatives aux plaques extrudées en poly(méthacrylate de méthyle) (PMMA) planes, incolores ou colorées, transparentes, translucides ou opaques.
La plage de l'épaisseur des plaques relevant de cette partie de l'ISO 7823 est comprise entre 1,5 mm et 20 mm.

Polimerni materiali – Plošče iz polimetilmetakrilata – Vrste, mere in značilnosti – 2. del: Ekstrudirane plošče (ISO 7823-2:2003)

General Information

• Status: Published
• Publication Date: 31-May-2003
• Withdrawal Date: 30-Dec-2003
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 6 - Thermoplastics films, foils and sheets
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jun-2003
• Completion Date: 01-Jun-2003
• Ref Project: SIST EN ISO 7823-2:2003 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)

Relations

• Replaces: EN ISO 7823-2:1996 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7823-2:2003
01-december-2003
1DGRPHãþD
SIST EN ISO 7823-2:1999
3ROLPHUQLPDWHULDOL±3ORãþHL]SROLPHWLOPHWDNULODWD±9UVWHPHUHLQ]QDþLOQRVWL±
GHO(NVWUXGLUDQHSORãþH,62
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics -
Part 2: Extruded sheets (ISO 7823-2:2003)
Kunststoffe - Tafeln aus Polymethylmethacrylat - Typen, Maße und Eigenschaften - Teil
2: Extrudierte Tafeln (ISO 7823-2:2003)
Plastiques - Plaques en poly(méthacrylate de méthyle) - Types, dimensions et
caractéristiques - Partie 2: Plaques extrudées (ISO 7823-2:2003)
Ta slovenski standard je istoveten z: EN ISO 7823-2:2003
ICS:
83.140.10 Filmi in folije Films and sheets
SIST EN ISO 7823-2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7823-2:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 7823-2:2003
EUROPEAN STANDARD
EN ISO 7823-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2003
ICS 83.140.10 Supersedes EN ISO 7823-2:1996
English version
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions
and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)
Plastiques - Plaques en poly(méthacrylate de méthyle) - Kunststoffe - Tafeln aus Polymethylmethacrylat - Typen,
Types, dimensions et caractéristiques - Partie 2: Plaques Maße und Eigenschaften - Teil 2: Extrudierte Tafeln (ISO
extrudées (ISO 7823-2:2003) 7823-2:2003)
This European Standard was approved by CEN on 5 May 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7823-2:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7823-2:2003
EN ISO 7823-2:2003 (E)
CORRECTED  2003-09-24
Foreword
This document (EN ISO 7823-2:2003) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2003, and conflicting national
standards shall be withdrawn at the latest by December 2003.
This document supersedes EN ISO 7823-2:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 7823-2:2003 has been approved by CEN as EN ISO 7823-2:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 7823-2:2003
EN ISO 7823-2:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 62 1999 Plastics — Determination of
...