EN ISO 8318:2002
(Main)Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
This International Standard specifies two methods for carrying out a sinusoidal vibration test on a complete, filled
transport package or unit load using a variable frequency. These tests may be used to assess the performance of a
package or an unit load in terms of its strength or the protection that it offers to its contents when it is subjected to
vertical vibration. Each may be performed either as a single test to investigate the effects of vertical vibration or as
part of a sequence of tests designed to measure the ability of a package or unit load to withstand a distribution
system that includes a vibration hazard.
Verpackung - Versandfertige Packstücke und Ladeeinheiten - Schwingprüfung mit variabler sinusförmiger Frequenz (ISO 8318:2000)
In dieser Internationalen Norm werden zwei Verfahren zur Durchführung einer Prüfung mit Sinusschwin-gungen und variabler Frequenz an versandfertigen Packstücken oder Ladeeinheiten festgelegt. Beide Prüfungen dienen dazu, die Festigkeit von Packstücken und Ladeeinheiten oder den Schutz zu beurteilen, den sie dem Packstoff bieten, wenn vertikale Schwingbeanspruchungen auftreten. Sie dürfen entweder als Einzel-prüfungen durchgeführt werden, um die Auswirkungen der Schwingbeanspruchung zu untersuchen oder als Teil einer Prüffolge zur Ermittlung der Widerstandsfähigkeit einer Verpackung oder Ladeeinheit im Rahmen eines bestimmten Verteilungssystems (Transportkette), das vertikale Schwingbeanspruchungen einschließt.
Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essais de vibration sinusoïdale à fréquence variable (ISO 8318:2000)
La présente Norme internationale spécifie deux méthodes d'essai de vibration sinusoïdale sur un emballage
d'expédition complet et plein ou une charge unitaire en utilisant une fréquence variable. De tels essais peuvent être
utilisés pour évaluer les caractéristiques d'un emballage ou d'une charge unitaire en fonction de sa résistance ou
de la protection qu'il offre à son contenu lorsqu'il est soumis à une vibration verticale. Chacun de ces essais peut
être effectué comme essai simple dans le but d'examiner les effets d'une vibration verticale, ou il peut faire partie
d'une série d'essais destinés à mesurer la résistance d'un emballage ou d'une charge unitaire dans un système de
distribution qui comprend un risque de vibration.
Embalaža - Celovita, napolnjena transportna embalaža - Vibracijski preskusi s spremenljivo sinusno frekvenco (ISO 8318:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8318:2003
01-januar-2003
1DGRPHãþD
SIST EN 28318:1998
Embalaža - Celovita, napolnjena transportna embalaža - Vibracijski preskusi s
spremenljivo sinusno frekvenco (ISO 8318:2000)
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration
tests using a variable frequency (ISO 8318:2000)
Verpackung - Versandfertige Packstücke und Ladeeinheiten - Schwingprüfung mit
variabler sinusförmiger Frequenz (ISO 8318:2000)
Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essais
de vibration sinusoidale a fréquence variable (ISO 8318:2000)
Ta slovenski standard je istoveten z: EN ISO 8318:2002
ICS:
55.180.40 Celovita, napolnjena Complete, filled transport
transportna embalaža packages
SIST EN ISO 8318:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8318:2003
---------------------- Page: 2 ----------------------
SIST EN ISO 8318:2003
EUROPEAN STANDARD
EN ISO 8318
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2002
ICS 55.180.40 Supersedes EN 28318:1992
English version
Packaging - Complete, filled transport packages and unit loads -
Sinusoidal vibration tests using a variable frequency (ISO
8318:2000)
Emballages - Emballages d'expédition complets et pleins Verpackung - Versandfertige Packstücke und
et charges unitaires - Essais de vibration sinusoïdale à Ladeeinheiten - Schwingprüfung mit variabler sinusförmiger
fréquence variable (ISO 8318:2000) Frequenz (ISO 8318:2000)
This European Standard was approved by CEN on 30 August 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8318:2002 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8318:2003
EN ISO 8318:2002 (E)
Foreword
The text of the International Standard from Technical Committee ISO/TC 122 "Packaging" of the
International Organization for Standardization (ISO) has been taken over as a European
Standard by Technical Committee CEN/TC 261 "Packaging", the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2003, and conflicting national
standards shall be withdrawn at the latest by March 2003.
This document supersedes EN 28318:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 8318:2000 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8318:2003
EN ISO 8318:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD appli
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.