EN 12387:2005/prA1

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

Type 1 amendment.

Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Schuhreperaturmaschinen - Sicherheitsanforderungen

Machines pour la fabrication des chaussures et articles chaussants en cuir et matériaux similaires - Equipement modulaire de réparation de chaussures - Prescriptions de sécurité

Stroji za izdelavo obutve, izdelkov iz usnja in njegovih imitacij - Modularna oprema za popravilo čevljev - Varnostne zahteve

General Information

• Status: Not Published
• ICS: 59.140.40 - Machines and equipment for leather and fur production
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 201 - Leather and imitation leather goods and footwear manufacturing machinery - Safety
• Drafting Committee: CEN/TC 201/WG 6 - Modular shoe repairing equipment
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 15-Jun-2009
• Completion Date: 15-Jun-2009
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12387:2005/kprA1:2009 - Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

Relations

• Merged Into: EN 12387:2005+A1:2009 - Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
• Effective Date: 18-Jan-2023
• Amends: EN 12387:2005 - Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2009
6WURML]DL]GHODYRREXWYHL]GHONRYL]XVQMDLQQMHJRYLKLPLWDFLM0RGXODUQDRSUHPD
]DSRSUDYLORþHYOMHY9DUQRVWQH]DKWHYH
Footwear, leather and imitation leather goods manufacturing machines - Modular shoe
repair equipment - Safety requirements
Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren -
Schuhreperaturmaschinen - Sicherheitsanforderungen
Machines pour la fabrication des chaussures et articles chaussants en cuir et matériaux
similaires - Equipement modulaire de réparation de chaussures - Prescriptions de
sécurité
Ta slovenski standard je istoveten z: EN 12387:2005/prA1
ICS:
59.140.40 Stroji in oprema za Machines and equipment for
proizvodnjo usnja in krzna leather and fur production
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 12387:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2009
ICS 59.140.40; 61.060
English Version
Footwear, leather and imitation leather goods manufacturing
machines - Modular shoe repair equipment - Safety
requirements
Machines pour la fabrication de chaussures et d'articles Maschinen zur Herstellung von Schuhen, Leder- und
chaussants en cuir et matériaux similaires - Equipement Kunstlederwaren - Schuhreperaturmaschinen -
modulaire de réparation de chaussures - Prescriptions de Sicherheitsanforderungen
sécurité
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 201.
This draft amendment A1, if approved, will modify the European Standard EN 12387:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12387:2005/prA1:2009: E
worldwide for CEN national Members.

Foreword
This document (EN 12387:2005/prA1:2009) has been prepared by Technical Committee CEN/TC 201
“Leather and imitation leather goods and footwear manufacturing machinery - Safety”, the secretariat of which
is held by UNI.
This document is currently submitted to the Unique Acceptance Procedure.
The first reason for amending the published standard EN 12387:2005 is the revision of the EU-Machinery
Directive 98/37/EC into 2006/42/EC, requiring the adaptation of published European Standards cited in the
Official Journal of the European Communities under that Directive.
Additionally at this occasion the normative references have been updated, while also some other limited
improvements and corrections have been made.
1 Modification to the Foreword
th
Replace the existing 4 paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
2 Modification to the Introduction
st
In the 1 paragraph replace "EN ISO 12100-1:2003" with "EN ISO 12100-1".

3 Modification to 1.6
Replace the text with the following: "This document is not applicable to shoe repair machines which are
manufactured before the date of its publication as EN.".

4 Modification to Clause 2
Replace reference EN 418 with the following: "EN ISO 13850, Safety of machinery – Emergency stop -
Principles for design (ISO 13850:2006)".
Replace reference EN 563 with the following: "EN ISO 13732-1, Ergonomics of the thermal environment –
Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-
1:2006)".
Replace "EN 574:1996" with "EN 574".
Replace reference EN 954-1 with the following: "EN ISO 13849-1, Safety of machinery – Safety-related parts
of control systems – Part 1: General principles for design (ISO 13849-1:2006)".
Delete reference EN 1050.
Replace "EN ISO 11688-1:1998" with "EN ISO 11688-1".
Replace "EN ISO 14122-1:2001" with "EN ISO 14122-1".
Replace "EN 60204-1:1997" with "EN 60204-1:2006". In the title replace "(IEC 60204-1:1997)" with "(IEC
60204-1:2005 (modified))"
Add the following reference: "EN 60335-2-69:2003, Household and similar electrical appliances – Safety –
Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and
commercial use (IEC 60335-2-69:2002, modified).".
Replace "EN 61310-1:1995" with "EN 61310-1" and in the title replace "(IEC 61310-1:1995)" with "(IEC
61310-1:2007)".
5 Modification to Clause 4
Replace the heading of this clause and the heading of Table 1 with the following: "List of significant hazards".
st
Delete the 1 sentence in 4.2 and make it a second sentence in the note.
nd
Delete the 2 sentence in 4.2.
6 Modification to 5.2.1.2
st
Replace the 1 paragraph with the following: "Unless required otherwise by 5.3 hazardous movements of
machinery parts, tools and work pieces shall be safeguarded by:"

7 Modification to 5.2.1.3
nd
Add the following text as 2 paragraph: "Fixing systems of fixed guards and fixed covers shall remain
attached to these parts or to the machine when the parts are removed."

8 Modification to 5.2.2.1
In the introductory sentence replace "EN 60204-1:1997" with "EN 60204-1".
In the last indent replace "12.3" with "11.3".

9 Modification to 5.2.3
Replace "EN 563" with "EN ISO 13732-1".

10 Modification to 5.2.6.1
st
In the 1 indent replace "EN 60204-1:1997" with "EN 60204-1:2006".

11 Modification to 5.2.6.2
Replace the text with the following: "The safety related parts of the control system shall as a minimum
conform to performance level "b" as defined in EN ISO 13849-1."
12 Modification to 5.3.1.13
Replace "EN 418" with "EN ISO 13850".

13 Modification to 5.3.2.1.a)
Replace "EN 574:1996" with "EN 574".

14 Modifcation to 5.3.2.3
Replace "EN 418" with "EN ISO 13850".

15 Modification to Clause 6
Delete the last sentence of the introduction.
Replace Table 2 with the following:
"
Table 2 — Methods of testing
Clause Subject Verification method Reference to rel. standard
Common requirements for all shoe repair machines
5.2
Mechanical equipment
5.2.1
5.2.1.1 Transmission machinery and drive mechanism
- fixed enclosing guards EN ISO 12100-2:2003, Clause
Measurement of gaps and
EN 294:1992, Tables 1, 3, 4
distances, visual inspection
EN 349
EN 953:1997, Clause 8
5.2.1.2 Moving machinery parts, tools, work pieces
- fixed enclosing guards EN ISO 12100-2:2003, Clause
Measurement of gaps and
- fixed covers
EN 294:1992, Tables 1, 3, 4
distances, visual inspection
EN 953:1997, Clause 8
Annex A of this standard
5.2.1.3 Safety distances, gaps Measurement of distances and
EN 294:1992, Tables 1, 3, 4
gaps
5.2.1.4 Force and pressure limitation Measurement of force
5.2.1.4 of this standard
calculation of pressure
5.2.1.5 Ope
...