EN 12203:2003/prA1
(Amendment)Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
Type 1 amendment.
Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Schuh- und Lederpressen - Sicherheitsanforderungen
Machines pour la fabrication des chaussures et articles chaussants en cuir et matériaux similaires - Presses pour la fabrication de chaussures et articles en cuir - Prescriptions de sécurité
Stroji za izdelavo obutve, izdelkov iz usnja in njegovih imitacij - Stiskalnice za čevlje in usnje - Varnostne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12203:2004/kprA1:2009
01-april-2009
6WURML]DL]GHODYRREXWYHL]GHONRYL]XVQMDLQQMHJRYLKLPLWDFLM6WLVNDOQLFH]D
þHYOMHLQXVQMH9DUQRVWQH]DKWHYH
Footwear, leather and imitation leather goods manufacturing machines - Shoe and
leather presses - Safety requirements
Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Schuh- und
Lederpressen - Sicherheitsanforderungen
Machines pour la fabrication des chaussures et articles chaussants en cuir et matériaux
similaires - Presses pour la fabrication de chaussures et articles en cuir - Prescriptions
de sécurité
Ta slovenski standard je istoveten z: EN 12203:2003/prA1
ICS:
59.140.40 Stroji in oprema za Machines and equipment for
proizvodnjo usnja in krzna leather and fur production
61.060 Obuvala Footwear
SIST EN 12203:2004/kprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12203:2004/kprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 12203:2004/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 12203:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2009
ICS 59.140.40; 61.060
English Version
Footwear, leather and imitation leather goods manufacturing
machines - Shoe and leather presses - Safety requirements
Machines pour la fabrication des chaussures et articles Maschinen zur Herstellung von Schuhen, Leder- und
chaussants en cuir et matériaux similaires - Presses pour Kunstlederwaren - Schuh- und Lederpressen -
la fabrication de chaussures et articles en cuir - Exigences Sicherheitsanforderungen
de sécurité
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 201.
This draft amendment A1, if approved, will modify the European Standard EN 12203:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12203:2003/prA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12203:2004/kprA1:2009
EN 12203:2003/prA1:2009 (E)
Foreword
This document (EN 12203:2003/prA1:2009) has been prepared by Technical Committee CEN/TC 201
“Leather and imitation leather goods and footwear manufacturing machinery - Safety”, the secretariat of which
is held by UNI.
This document is currently submitted to the Unique Acceptance Procedure.
The first reason for amending the published standard EN 12203:2003 is the revision of the EU-Machinery
Directive 98/37/EC into 2006/42/EC, requiring the adaptation of published European Standards cited in the
Official Journal of the European Communities under that Directive.
Additionally at this occasion the normative references have been updated, while also some other limited rather
editorial improvements and corrections have been made.
2
---------------------- Page: 4 ----------------------
SIST EN 12203:2004/kprA1:2009
EN 12203:2003/prA1:2009 (E)
1 Modification to the Foreword
rd th
Replace the 3 and 4 paragraphs with the following:
"This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annexes ZA and ZB, which are integral parts of this
document."
Replace the last but one paragraph with the following: "Annexes A to O are normative."
2 Modification to the Introduction
Delete the existing text and replace it with the following:
"This document is a type C standard as stated in EN ISO 12100.
The machinery concerned and the extent to which hazards,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.