iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1744-1:1998

(Main)

Tests for chemical properties of aggregates - Part 1: Chemical analysis

Tests for chemical properties of aggregates - Part 1: Chemical analysis

This European Standard specifies procedures for the chemical analysis of aggregates. It specifies the reference procedures and, in certain cases, an alternative method which can be considered as giving equivalent results. If other methods are used it is necessary to show that they give results equivalentto those given by the reference methods. In cases of dispute, only the referenceprocedures shall be used. Unless otherwise stated, the test methods specified inthis European Standard may be used for factory production control, for audit tests or for type tests.

Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 1: Chemische Analyse

Diese Europäische Norm legt Verfahren für die chemische Analyse von Gesteins- körnungen fest. Sie beschreibt die Referenzverfahren und in einigen Fällen Alternativverfahren, deren Ergebnisse denen des Referenzverfahrens entsprechen. Werden andere Verfahren angewendet, so ist nachzuweisen, daß ihre Ergebnisse denen der Referenzverfahren entsprechen. Im Streitfall sollten die Referenzverfahren angewendet werden.

Essais pour déterminer les propriétés chimiques des granulats - Partie 1: Analyse chimique

La présente norme européenne prescrit les modes opératoires concernant l'analyse chimique des granulats. Elle décrit les modes opératoires de référence, et, dans certains cas, une méthode alternative qui peut être considérée comme donnant des résultats équivalents. Si d'autres méthodes sont utilisées, il est nécessaire de montrer qu'elles donnent des résultats équivalents à ceux obtenus suivant les méthodes de référence. En cas de contestation, seuls les modes opératoires de référence devraient être utilisés.

Preskusi kemičnih lastnosti agregatov - 1. del: Kemijska analiza

General Information

Status
Withdrawn
Publication Date
17-Mar-1998
Withdrawal Date
17-Nov-2009
ICS
71.040.40 - Chemical analysis
Technical Committee
CEN/TC 154 - Aggregates
Drafting Committee
CEN/TC 154/SC 6 - Test methods
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Nov-2009
Completion Date
18-Nov-2009
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/125 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on aggregates
M/BC/CEN/87/12 - Standardization request in the field of Construction products - masonry
Ref Project
SIST EN 1744-1:1999 - Tests for chemical properties of aggregates - Part 1: Chemical analysis

Relations

Replaced By
EN 1744-1:2009 - Tests for chemical properties of aggregates - Part 1: Chemical analysis
Effective Date
21-Nov-2009

Buy Standard

EN 1744-1:1999EN 1744-1:1999
PreviousNext
Standard
EN 1744-1:1999
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 1: Chemische AnalyseEssais pour déterminer les propriétés chimiques des granulats - Partie 1: Analyse chimiqueTests for chemical properties of aggregates - Part 1: Chemical analysis91.100.15Mineralni materiali in izdelkiMineral materials and products71.040.40Kemijska analizaChemical analysisICS:Ta slovenski standard je istoveten z:EN 1744-1:1998SIST EN 1744-1:1999en01-junij-1999SIST EN 1744-1:1999SLOVENSKI
STANDARD



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999



SIST EN 1744-1:1999
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17674:2021(Main)
Bio-based products- Use of stable isotope ratios of Carbon, Hydrogen, Oxygen and Nitrogen as tools for verification of the origin of bio-based feedstock and characteristics of production processes - Overview of relevant existing applications
SIST-TP CEN/TR 17674:2021

The stable isotope ratios of carbon, hydrogen, oxygen and nitrogen can be used to obtain information about the origin of bio-based feedstock and characteristics of production processes of bio-based products. However, no or limited attention for the use of the elements nitrogen and sulphur is given in this document due to the fact that these applications are not yet available.
This Technical Report provides an overview of existing applications of isotope ratio analysis of carbon, hydrogen, oxygen and nitrogen that are relevant to the analysis of bio-based feedstocks, products and production processes

  • Technical report
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6141:2015/A1:2020(Amendment)
Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)
SIST EN ISO 6141:2015/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6145-1:2019(Main)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
SIST EN ISO 6145-1:2019

This document gives a brief overview of each of the dynamic techniques which are described in detail in the subsequent parts of ISO 6145. This document provides basic information to support an informed choice for one or another method for the preparation of calibration gas mixtures. It also describes how these methods can be linked to national measurement standards to establish metrological traceability for the composition of the prepared gas mixtures.
Since all techniques are dynamic and rely on flow rates, this document describes the calibration process by measurement of each individual flow rate generated by the device.
Methods are also provided for assessing the composition of the generated gas mixtures by comparison with an already validated calibration gas mixture.
This document provides general requirements for the use and operation of dynamic methods for gas mixture preparation. It also includes the necessary expressions for calculating the calibration gas composition and its associated uncertainty.
Gas mixtures obtained by these dynamic methods can be used to calibrate or control gas analysers.
The storage of dynamically prepared gas mixtures into bags or cylinders is beyond the scope of this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17256:2019(Main)
Animal feeding stuffs: Methods of sampling and analysis - Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS
SIST EN 17256:2019

This document describes a method for the determination of individual ergot alkaloids and tropane alkaloids in unprocessed cereals and cereal-based compound feeds by high performance liquid chromatography with tandem mass spectrometry (LC-MS/MS).
This method has been successfully validated by collaborative trial in the following matrices: rye, barley, wheat, complete feed for bovine, porcine and poultry. Validation in buckwheat produced acceptable results, but the relative standard reproducibility was higher for most analytes in comparison with the other matrices. This may be related to the matrix. The validated range of the method is approximately 10 to 250 µg/kg for individual alkaloids. Determination of concentrations above 250 µg/kg is possible by applying a higher spiking level and dilution of the sample extract, but this has not been validated in the collaborative trial.
The method is applicable for the determination, by means of one-point standard addition to the sample, of ergocornine in the tested range of 12 µg/kg to 221 µg/kg, ergocorninine in the tested range of 9 µg/kg to 196 µg/kg, ergocristine in the tested range of 14 µg/kg to 312 µg/kg, ergocristinine in the tested range of 12 µg/kg to 258 µg/kg, α-ergocryptine in the tested range of 10 µg/kg to 184 µg/kg, α-ergocryptinine in the tested range of 8 µg/kg to 171 µg/kg, ergometrine in the tested range of 12 µg/kg to 174 µg/kg, ergometrinine in the tested range of 3 µg/kg to 172 µg/kg, ergosine in the tested range of 12 µg/kg to 226 µg/kg, ergosinine in the tested range of 9 µg/kg to 273 µg/kg, ergotamine in the tested range of 11 µg/kg to 443 µg/kg, ergotaminine in the tested range of 10 µg/kg to 273 µg/kg, atropine in the tested range of 16 µg/kg to 252 µg/kg and scopolamine in the tested range of 15 µg/kg to 246 µg/kg.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17294:2019(Main)
Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
SIST EN 17294:2019

This document specifies a method for the determination of organic acids in animal feeding stuffs by Ion Chromatography with conductivity detection (IC-CD).
The method is intended to be used for the determination of formic acid, lactic acid, propionic acid, citric acid, fumaric acid and malic acid as active substances in feed additives, premixtures, feed materials, compound feed and water and for acetic acid in a limited manner in the same matrices. This method determines the total extractable concentration of the above mentioned organic acids and their salts.
It is advisable that the user of this standard determines the working range of the method for each organic acid. The lower limit of the working range depends on the matrix and the interferences encountered. It is advisable that a working range between 10 mg/l and 100 mg/l is achievable.
The method was successfully tested in an inter-laboratory study in concentrations between 0,02 % up to 27 % of the above mentioned organic acids.
NOTE   Limitation occurs during simultaneous determination of high concentration of lactic acid and low concentration of acetic acid. If the ratio of concentration of lactic acid to acetic acid exceeds factor 20, the determination of acetic acid is not guaranteed.
On the basis of the referred working range, sample weight and extraction volume, limits of quantification (LOQ), as calculated (Table 1) can be achievable.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17421:2019(Main)
Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
SIST-TP CEN/TR 17421:2019

This document gives guidance to those involved in designing, executing and evaluating interlaboratory comparison studies for multi-analyte methods of analysis, developed by CEN/TC 327 “Animal feeding stuffs: Methods of sampling and analysis” and its working groups.
For the validation of multi-analyte methods their particularities must be considered which might necessitate deviations from the prescribed validation protocols. This study provides information whether the method is fit for its purpose and which performance can be expected in practical work while at the same time keeping the necessary effort for the study organizer and the participating laboratories minimal.
Next to the abovementioned aspects regarding interlaboratory comparison studies, this document also gives guidance on the preceding steps, viz. in-house validation and preparation of the method protocol. Guidance is also given on the transferability of the method protocol and the familiarization with the method protocol through a training study, elements that – depending on the specific method – could be included in the design of the study.

  • Technical report
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17298:2019(Main)
Animal feeding stuffs - Methods of sampling and analysis - Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC)
SIST EN 17298:2019

This document specifies a method for the determination of benzoic acid and sorbic acid in animal feeding stuffs by high-performance liquid chromatography method with ultraviolet detection (HPLC-UV).
The method is intended to be used for the determination of benzoic acid and sorbic acid as active substances in feed additives, premixtures, feed materials and compound feed and for benzoic acid in water. This method determines the total extractable concentration of these organic acids and their salts.
It is advisable that the working range of the method is determined for each organic acid by the user of this standard. The lower limit of the working range depends on the matrix and the interferences encountered. It is advisable that a working range between 5 mg/l and 100 mg/l is accessible.
The method was successfully tested in an inter-laboratory study in concentrations between 0,02 % up to 9,0 %.
On the basis of the referred working range, sample weight and extraction volume, limits of quantification (LOQ), as calculated (Table 1) on the basis of a wavelength of 230 nm, can be achievable.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6145-7:2018(Main)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
SIST EN ISO 6145-7:2019

ISO 6145 is a series of documents dealing with various dynamic methods used for the preparation of calibration gas mixtures. This document specifies a method for continuous preparation of calibration gas mixtures, from nominally pure gases or gas mixtures by use of thermal mass-flow controllers. The method is applicable to preparation of mixtures of non-reacting species, i.e. those which do not react with any material of construction of the flow path in the thermal mass-flow controller or the ancillary equipment.
If this method is employed for preparation of calibration gas mixtures the optimum performance is as follows: the relative expanded measurement uncertainty U, obtained by multiplying the standard uncertainty by a coverage factor k = 2, is not greater than 2 %.
If pre-mixed gases are used instead of pure gases, mole fractions below 10−6 can be obtained. The measurement of mass flow is not absolute and the flow controller requires independent calibration.
The merits of the method are that a large quantity of the calibration gas mixture can be prepared on a continuous basis and that multi-component mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.
NOTE       Gas blending systems, based upon thermal mass-flow controllers, and some including the facility of computerization and automatic control, are commercially available.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16785-2:2018(Main)
Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method
SIST EN 16785-2:2018

This part of EN 16785 specifies a method of determining the bio-based content in products using the material balance applied to a representative product batch in a production unit.
This European Standard is applicable to any solid, liquid and gaseous bio-based product containing carbon, obtained by chemical synthesis, mixing or assembling, provided that:
-   for a product batch, the composition of the product and the bio-based content of each input, output and loss  in the production unit are known; and
-   the bio-based content of the product is verifiable by analysis.
This method incorporates only the physical parts of the input and output stream as present in the final product, and does not incorporate material inputs for the energy to be used during the production process.
This method is not needed for the determination of the bio-based content in natural products wholly derived from biomass.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6145-6:2017(Main)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
SIST EN ISO 6145-6:2017

ISO 6145-6:2017 specifies a method for the dynamic preparation of calibration gas mixtures containing at least two gases (usually one of them is a complementary gas) from pure gases or gas pre-mixtures using critical flow orifices systems.
The method applies principally to the preparation of mixtures of non-reactive gases that do not react with any of the materials forming the gas circuit inside the critical flow orifices system or auxiliary equipment. It has the merit of allowing multi-component mixtures to be prepared as readily as binary mixtures if an appropriate number of critical flow orifices are used.
By selecting appropriate combinations of critical flow orifices, a dilution ratio of 1 × 104 is achievable.
Although it is more particularly applicable to the preparation of gas mixtures at atmospheric pressure, the method also offers the possibility of preparing calibration gas mixtures at pressures greater than atmospheric. The upstream pressure will need to be at least two times higher than downstream pressure.
The range of flow rates covered by this document extends from 1 ml/min to 10 l/min.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day