EN 652:2011

Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking

Elastische Bodenbeläge - Polyvinylchlorid-Bodenbeläge mit einem Rücken auf Korkbasis - Spezifikation

Diese Europäische Norm legt die allgemeinen Eigenschaften von Bodenbelägen auf der Basis aus Polyvinylchlorid und dessen Modifikationen mit einem Rücken auf Korkbasis fest, die sowohl in Form von Platten als auch als Rollen geliefert werden.
Um den Verbraucher bei seiner Auswahl zu unterstützen, enthält diese Norm ein Klassifizierungssystem (siehe EN 685) auf Basis der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre. Die Norm legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Revêtements de sol à base de polychlorure de vinyle sur support à base de liège - Spécifications

La présente Norme européenne prescrit les caractéristiques des revêtements de sol à base de polychlorure
de vinyle et ses modifications, sur support à base de liège, sous forme de dalles ou de rouleaux.
Pour aider le consommateur à faire son choix, la présente norme inclut un système de classification (voir
l’EN 685) basé sur l'intensité d'utilisation, indiquant l'endroit où le revêtement de sol rendrait un service
satisfaisant. Elle spécifie également des exigences relatives au marquage.

Netekstilne talne obloge - Polivinilkloridne talne obloge s hrbtiščem na osnovi plute - Specifikacija

Ta evropski standard določa značilnosti talnih oblog na osnovi polivinilklorida in njegovih modifikacij s hrbtiščem na osnovi plute, dostavljenih v obliki plošč ali zvitka.
Da bi ta evropski standard potrošnike spodbujal k sprejemanju utemeljenih odločitev, vsebuje klasifikacijski sistem (glej EN 685), temelječ na intenzivnosti uporabe, ki kaže, kje bi se te talne obloge lahko zadovoljivo uporabljale. Določa tudi zahteve za označevanje.

General Information

• Status: Published
• Publication Date: 08-Mar-2011
• Withdrawal Date: 29-Sep-2011
• ICS: 91.180 - Interior finishing
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 7 - Resilient floor coverings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 15-Jun-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 652:2011 - Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification

Relations

• Replaces: EN 652:1996 - Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification
• Effective Date: 12-Mar-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN 652:1999
1HWHNVWLOQHWDOQHREORJH3ROLYLQLONORULGQHWDOQHREORJHVKUEWLãþHPQDRVQRYL
SOXWH6SHFLILNDFLMD
Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing -
Specification
Elastische Bodenbeläge - Polyvinylchlorid-Bodenbeläge mit einem Rücken auf Korkbasis
- Spezifikation
Revêtements de sol résilients - Revêtements de sol à base de polychlorure de vinyle sur
support à base de liège - Spécifications
Ta slovenski standard je istoveten z: EN 652:2011
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 652
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 97.150 Supersedes EN 652:1996
English Version
Resilient floor coverings - Polyvinyl chloride floor coverings with
cork-based backing - Specification
Revêtements de sol résilients - Revêtements de sol à base Elastische Bodenbeläge - Polyvinylchlorid-Bodenbeläge mit
de polychlorure de vinyle sur support à base de liège - einem Rücken auf Korkbasis - Spezifikation
Spécifications
This European Standard was approved by CEN on 6 February 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 652:2011: E
worldwide for CEN national Members.

Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirement . 5
4.1 General requirements . 5
4.2 Classification requirements. 5
4.2.1 Wear groups classification . 5
4.2.2 Level of use classification . 5
5 Marking . 10
Annex A (informative) Optional properties . 11
Annex B (informative) Additional methods of test. 12
Bibliography . 13

Foreword
This document (EN 652:2011) has been prepared by Technical Committee CEN/TC 134 “Floor coverings”, the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 652:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
1 Scope
This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and
modifications thereof with a cork-based backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see
EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service.
It also specifies requirements for marking
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 424, Resilient floor coverings — Determination of the effect of the simulated movement of a furniture leg
EN 425, Resilient and laminate floor coverings —Castor chair test
EN 426, Resilient floor coverings — Determination of width, length, straightness and flatness of sheet material
EN 427, Resilient floor coverings — Determination of the side length, squareness and straightness of tiles
EN 428, Resilient floor coverings — Determination of overall thickness
EN 429, Resilient floor coverings — Determination of the thickness of layers
EN 430, Resilient floor coverings — Determination of mass per unit area
EN 431, Resilient floor coverings — Determination of peel resistance
EN 433, Resilient floor coverings — Determination of residual indentation after static loading
EN 434, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
EN 436, Resilient floor coverings — Determination of density
EN 660-2, Resilient floor coverings — Determination of wear resistance — Part 2: Frick-Taber test
EN 684, Resilient floor coverings — Determination of seam strength
EN 685, Resilient, textile and laminate floor coverings — Classification
EN ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon
arc fading lamp test (ISO 105-B02:1994, incl
...