iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 18846:2016

(Main)

Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)

Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)

ISO 18846:2016 specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole.

Biogene Festbrennstoffe - Bestimmung des Gehaltes an Feingut in Mengen von Pellets (ISO 18846:2016)

Biocombustibles solides - Détermination de la teneur en fines dans des échantillons de granulés (ISO 18846:2016)

L'ISO 18846 :2016 spécifie une méthode de détermination de la quantité de matériau passant à travers un tamis ayant des perforations rondes de 3,15 mm de diamètre.

Trdna biogoriva - Določevanje drobirja v količini peletov (ISO 18846:2016)

Ta mednarodni standard določa metodo ugotavljanja drobirja v količini peletov s pomočjo ročnega sejanja in s sejalno odprtino premera 3,15 mm.

General Information

Status
Published
Publication Date
06-Sep-2016
Withdrawal Date
30-Mar-2017
ICS
27.190 - Biological sources and alternative sources of energy
75.160.10 - Solid fuels
75.160.40 - Biofuels
Technical Committee
CEN/TC 335 - Solid biofuels
Drafting Committee
CEN/TC 335 - Solid biofuels
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
07-Sep-2016
Completion Date
07-Sep-2016
Ref Project
SIST EN ISO 18846:2016 - Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)

Buy Standard

EN ISO 18846:2016EN ISO 18846:2016
PreviousNext
Standard
EN ISO 18846:2016
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18846:2016
01-november-2016
7UGQDELRJRULYD'RORþHYDQMHGURELUMDYNROLþLQLSHOHWRY ,62
Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
Biogene Festbrennstoffe - Bestimmung des Gehaltes an Feingut in Mengen von Pellets
(ISO 18846:2016)
Biocombustibles solides - Dosage de la teneur en particules fines dans les quantités de
granulés (ISO 18846:2016)
Ta slovenski standard je istoveten z: EN ISO 18846:2016
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 18846:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18846:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 18846:2016


EN ISO 18846
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2016
EUROPÄISCHE NORM
ICS 27.190; 75.160.10
English Version

Solid biofuels - Determination of fines content in quantities
of pellets (ISO 18846:2016)
Biocombustibles solides - Détermination de la teneur Biogene Festbrennstoffe - Bestimmung des Gehaltes an
en fines dans des échantillons de granulés (ISO Feingut in Mengen von Pellets (ISO 18846:2016)
18846:2016)
This European Standard was approved by CEN on 7 August 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18846:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18846:2016
EN ISO 18846:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18846:2016
EN ISO 18846:2016 (E)
European foreword
This document (EN ISO 18846:2016) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall
be withdrawn at the latest by March 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18846:2016 has been approved by CEN as EN ISO 18846:2016 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 18846:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 18846:2016
INTERNATIONAL ISO
STANDARD 18846
First edition
2016-09-01
Solid biofuels — Determination of
fines content in samples of pellets
Biocombustibles solides — Détermination de la teneur en fines dans
des échantillons de granulés
Reference number
ISO 18846:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19743:2017(Main)
Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017)
SIST EN ISO 19743:2017

ISO 19743:2017 specifies a method for the determination of content of heavy extraneous materials larger than 3,15 mm by the use of sink-and-float separation combined with elutriation. This document is applicable to woody biomass in accordance with ISO 17225‑1:2014, Table 1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18125:2017(Main)
Solid biofuels - Determination of calorific value (ISO 18125:2017)
SIST EN ISO 18125:2017

ISO 18125:2017 specifies a method for the determination of the gross calorific value of a solid biofuel at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid.
The result obtained is the gross calorific value of the analysis sample at constant volume with all the water of the combustion products as liquid water. In practice, biofuels are burned at constant (atmospheric) pressure and the water is either not condensed (removed as vapour with the flue gases) or condensed. Under both conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. The net calorific value at constant volume may also be used; formulae are given for calculating both values.
General principles and procedures for the calibrations and the biofuel experiments are presented in the main text, whereas those pertaining to the use of a particular type of calorimetric instrument are described in Annexes A to C. Annex D contains checklists for performing calibration and fuel experiments using specified types of calorimeters. Annex E gives examples to illustrate some of the calculations.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14780:2017(Main)
Solid biofuels - Sample preparation (ISO 14780:2017)
SIST EN ISO 14780:2017

ISO 14780:2017 defines methods for reducing combined samples (or increments) to laboratory samples and laboratory samples to sub-samples and general analysis samples and is applicable to solid biofuels.
The methods defined in this document can be used for sample preparation, for example, when the samples are to be tested for calorific value, moisture content, ash content, bulk density, durability, particle size distribution, ash melting behaviour, chemical composition, and impurities.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18135:2017(Main)
Solid Biofuels - Sampling (ISO 18135:2017)
SIST EN ISO 18135:2017

ISO 18135:2017 describes methods for preparing sampling plans and certificates, as well as taking samples of solid biofuels, for example, from the place where the raw materials grow, from production plant, from deliveries, e.g. lorry loads, or from stock. It includes both manual and mechanical methods, and is applicable to solid biofuels that are either:
-      fine (particle sizes up to about 10 mm) and regularly shaped particulate materials that can be sampled using a scoop or pipe, for example, sawdust, olive stones and wood pellets;
-      coarse or irregularly shaped particulate materials (particle sizes up to about 200 mm) that can be sampled using a fork or shovel, for example, wood chips and nut shells, forest residue chips, and straw;
-      baled materials, for example, baled straw or grass;
-      large pieces (particle sizes above 200 mm) that are either picked manually or automatically;
-      vegetable waste, fibrous waste from virgin pulp production and from production of paper from pulp that has been dewatered;
-      thermally treated and densified biomass materials;
-      roundwood.
ISO 18135:2017 is not applicable to airborne dust from solid biofuels. It may be possible to use this document for other solid biofuels.
The methods described in this document may be used, for example, when the samples are to be tested for moisture content, ash content, calorific value, bulk density, durability, particle size distribution, ash melting behaviour and chemical composition.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18847:2016(Main)
Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
SIST EN ISO 18847:2016

ISO 18847:2016 specifies the method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination have to be standardized to enable comparative determinations to be made.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16994:2016(Main)
Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016)
SIST EN ISO 16994:2016

ISO 16994:2016 describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. It specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in ISO 16994:2016, provided that a validation is carried out as specified and that the performance characteristics are similar to those of the method described in ISO 16994:2016.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16993:2016(Main)
Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
SIST EN ISO 16993:2016

ISO 16993:2016 gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be applied to certain determined values for solid biofuels prior to their calculation to other bases.
In Annex A, tools for integrity checks of analytical results are given. In Annex B, conversion factors for calculation into other units are given. Annex C is a guideline for the use of validation parameters as can be found in ISO/TC 238 analytical standards.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-2:2016(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
SIST EN ISO 17827-2:2016

ISO 17827-2:2016 specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This part of ISO 17827 applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2016(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
SIST EN ISO 17830:2016

ISO 17830:2016 aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-1:2016(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
SIST EN ISO 17827-1:2016

ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day