Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)

This part of ISO 14528 specifies the requirements for the physical and chemical properties of melamineformaldehyde
powder moulding compounds (MF-PMCs) and compression- or injection-moulded test specimens
produced from them.
It is limited to those powder moulding compounds whose composition and properties are significantly different. It is
further limited to those moulding compounds which are of general technical and/or economic importance.
The properties which are used to characterize the moulding compounds, the test methods and the test conditions
are selected from those given in ISO 14528-2.
The moulding compounds are divided into types according to their composition and properties. The various types
are designated using the designation system defined in ISO 14528-1.

Kunststoffe - Rieselfähige Melamin-Formaldehyd-Formmassen (MF-PMC) - Teil 3: Anforderungen an ausgewählte Formmassen (ISO 14528-3:1999)

In diesem Teil von ISO 14528 werden die Anforderungen an physikalische und chemische Eigenschaften von rieselfähigen Melamin-Formaldehyd-Formmassen (MF-PMC) und daraus formgepreßten oder spritzgegossenen Probekörpern festgelegt. Die Auswahl ist auf solche Formmassen begrenzt, deren Zusammensetzung und Eigenschaften sich deutlich unterscheiden. Außerdem ist die Auswahl auf die Formmassen begrenzt, die von allgemeinerer technischer und/oder wirtschaftlicher Bedeutung sind.

Plastiques - Poudres à mouler à base de mélamine-formaldéhyde (MF-PMC) - Partie 3: Exigences relatives à certaines poudres à mouler (ISO 14528-3:1999)

La présente partie de l'ISO 14528 spécifie les caractéristiques physiques et chimiques des poudres à mouler à
base de mélamine-formaldéhyde (MF-PMC) et des éprouvettes moulées par injection ou par compression,
produites à partir de ces poudres.
Elle se limite aux poudres à mouler dont la composition et les propriétés diffèrent de manière significative. En
outre, elle ne concerne que les poudres à mouler dont l'importance technique et/ou économique est assez
générale.
Les propriétés qui sont utilisées pour caractériser les poudres à mouler, ainsi que les méthodes et conditions
d'essai, sont choisies parmi celles indiquées dans l'ISO 14528-2.
Les poudres à mouler sont réparties en différents types selon leur composition et leurs propriétés. Ces divers types
sont désignés en utilisant le système de désignation défini dans l'ISO 14528-1.

Polimerni materiali - Melamin-formaldehidne praškaste zmesi za oblikovanje (MF- PMCS) - 3. del: Zahteve za izbrane zmesi za oblikovanje (ISO 14528-3:1999)

General Information

Status
Published
Publication Date
14-Nov-1999
Withdrawal Date
30-May-2000
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Nov-1999
Completion Date
15-Nov-1999

Buy Standard

Standard
EN ISO 14528-3:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polimerni materiali - Melamin-formaldehidne praškaste zmesi za oblikovanje (MF- PMCS) - 3. del: Zahteve za izbrane zmesi za oblikovanje (ISO 14528-3:1999)Kunststoffe - Rieselfähige Melamin-Formaldehyd-Formmassen (MF-PMC) - Teil 3: Anforderungen an ausgewählte Formmassen (ISO 14528-3:1999)Plastiques - Poudres a mouler a base de mélamine-formaldéhyde (MF-PMC) - Partie 3: Exigences relatives a certaines poudres a mouler (ISO 14528-3:1999)Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)83.080.10DuromeriThermosetting materialsICS:Ta slovenski standard je istoveten z:EN ISO 14528-3:1999SIST EN ISO 14528-3:2000en01-december-2000SIST EN ISO 14528-3:2000SLOVENSKI
STANDARD



SIST EN ISO 14528-3:2000



SIST EN ISO 14528-3:2000



SIST EN ISO 14528-3:2000



SIST EN ISO 14528-3:2000



SIST EN ISO 14528-3:2000



ReferencenumberISO14528-3:1999(E)©ISO1999INTERNATIONALSTANDARDISO14528-3Firstedition1999-11-15Plastics—Melamine-formaldehydepowdermouldingcompounds(MF-PMCs)—Part3:RequirementsforselectedmouldingcompoundsPlastiques—Poudresàmouleràbasedemélamine-formaldéhyde(MF-PMC)—Partie3:ExigencesrelativesàcertainespoudresàmoulerSIST EN ISO 14528-3:2000



ISO14528-3:1999(E)©ISO1999Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227341079E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO1999–AllrightsreservedPDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.SIST EN ISO 14528-3:2000



ISO14528-3:1999(E)©ISO1999–AllrightsreservediiiForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO14528maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO14528-3waspreparedbyTechnicalCommitteeISO/TC61,Plastics,SubcommitteeSC12,Thermosettingmaterials.Afteratransitionperiodof,atthemost,fouryears,thethreepartsofISO14528(seebelow),togetherwiththethreepartsofISO14527,willreplaceISO2112:1990,ofwhichtheyconstituteatechnicalrevision.ISO14528consistsofthefollowingparts,underthegeneraltitlePlastics—Melamine-formaldehydepowdermouldingcompounds(MF-PMCs):Part1:DesignationsystemandbasisforspecificationsPart2:PreparationoftestspecimensanddeterminationofpropertiesPart3:RequirementsforselectedmouldingcompoundsAnnexAofthispartofISO14528isforinformationonly.SIST EN ISO 14528-3:2000



SIST EN ISO 14528-3:2000



INTERNATIONALSTANDARDISO14528-3:1999(E)©ISO1999–Allrightsreserved1Plastics—Melamine-formaldehydepowdermouldingcompounds(MF-PMCs)—Part3:Requirementsforselectedmouldingcompounds1ScopeThispartofISO14528specifiestherequirementsforthephysicalandchemicalpropertiesofmelamine-formaldehydepowdermouldingcompounds(MF-PMCs)andcompression-orinjection-mouldedtestspecimensproducedfromthem.Itislimitedtothosepowdermouldingcompoundswhosecompositionandpropertiesaresignificantlydifferent.Itisfurtherlimitedtothosemouldingcompoundswhichareofgeneraltechnicaland/oreconomicimportance.Thepropertieswhichareusedtocharacterizethemouldingcompounds,thetestmethodsandthetestconditionsareselectedfromthoseg
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.