EN ISO 3037:2013

Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)

ISO 3037:2013 specifies an unwaxed edge method for the determination of the edgewise crush resistance of corrugated fibreboard. It is applicable to all corrugated fibreboard grades.

Wellpappe - Bestimmung des Kantenstauchwiderstandes (Verfahren für ungewachste Kanten) (ISO 3037:2013)

Diese Internationale Norm legt ein Verfahren für die Bestimmung des Kantenstauchwiderstandes mit ungewachsten Kanten von Wellpappe fest. Es ist anwendbar für alle Wellpappe-Klassen.

Carton ondulé - Détermination de la résistance à la compression sur chant (méthode sans enduction de cire) (ISO 3037:2013)

L'ISO 3037:2013 spécifie une méthode sans enduction de cire pour déterminer la résistance à la compression sur chant du carton ondulé. Elle est applicable à toutes les qualités de carton ondulé.

Valoviti karton - Določanje robne odpornosti (metoda ECT) (ISO 3037:2013)

Ta mednarodni standard določa metodo ECT za določanje robne odpornosti valovitega kartona. Uporablja se za vse kategorije valovitega kartona.

General Information

• Status: Withdrawn
• Publication Date: 06-Aug-2013
• Withdrawal Date: 06-Dec-2022
• ICS: 85.060 - Paper and board
• ICS: 85.080.30 - Cardboard
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Dec-2022
• Ref Project: SIST EN ISO 3037:2013 - Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)

Relations

• Replaces: EN ISO 3037:2007 - Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007)
• Effective Date: 14-Aug-2013
• Replaced By: EN ISO 3037:2022 - Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
• Effective Date: 15-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3037:2013
01-december-2013
1DGRPHãþD
SIST EN ISO 3037:2007
9DORYLWLNDUWRQ'RORþDQMHUREQHRGSRUQRVWLPHWRGD(&7,62
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge
method) (ISO 3037:2013)
Wellpappe - Bestimmung des Kantenstauchwiderstandes (Verfahren für ungewachste
Kanten) (ISO 3037:2013)
Carton ondulé - Détermination de la résistance à la compression sur chant (méthode
sans enduction de cire) (ISO 3037:2013)
Ta slovenski standard je istoveten z: EN ISO 3037:2013
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 3037:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3037:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 3037:2013


EUROPEAN STANDARD
EN ISO 3037

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 85.080.30 Supersedes EN ISO 3037:2007
English Version
Corrugated fibreboard - Determination of edgewise crush
resistance (unwaxed edge method) (ISO 3037:2013)
Carton ondulé - Détermination de la résistance à la Wellpappe - Bestimmung des Kantenstauchwiderstandes
compression sur chant (méthode sans enduction de cire) (Verfahren für ungewachste Kanten) (ISO 3037:2013)
(ISO 3037:2013)
This European Standard was approved by CEN on 15 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3037:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3037:2013
EN ISO 3037:2013 (E)
Contents
Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3037:2013
EN ISO 3037:2013 (E)
Foreword
This document (EN ISO 3037:2013) has been prepared by Technical Committee ISO/TC 6 “Paper, board and
pulps” in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3037:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3037:2013 has been approved by CEN as EN ISO 3037:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 3037:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 3037:2013
INTERNATIONAL ISO
STANDARD 3037
Fifth edition
2013-08-01
Corrugated fibreboard —
Determination of edgewise crush
resistance (unwaxed edge method)
Carton ondulé — Déterminati
...