EN ISO 4210-7:2023

Cycles - Safety requirements for bicycles - Part 7: Wheel and rim test methods (ISO 4210-7:2023)

This document specifies wheel and rim test methods for ISO 4210‑2.

Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 7: Prüfverfahren für Laufräder und Felgen (ISO 4210-7:2023)

Dieses Dokument legt die Prüfverfahren für Laufräder und Felgen nach ISO 4210 2 fest.

Cycles - Exigences de sécurité pour les bicyclettes - Partie 7: Méthodes d'essai des roues et des jantes (ISO 4210-7:2023)

Kolesa - Varnostne zahteve za kolesa - 7. del: Preskusne metode za kolesa in obroče (ISO 4210-7:2023)

Ta dokument določa preskusne metode za kolesa in obroče za standard ISO 4210-2.

General Information

• Status: Published
• Publication Date: 24-Jan-2023
• ICS: 43.150 - Cycles
• Technical Committee: CEN/TC 333 - Cycles
• Drafting Committee: CEN/TC 333 - Cycles
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Jan-2023
• Completion Date: 25-Jan-2023
• Ref Project: SIST EN ISO 4210-7:2023 - Cycles - Safety requirements for bicycles - Part 7: Wheel and rim test methods (ISO 4210-7:2023)

Relations

• Replaces: EN ISO 4210-7:2014 - Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods (ISO 4210-7:2014)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4210-7:2023
01-april-2023
Nadomešča:
SIST EN ISO 4210-7:2014
Kolesa - Varnostne zahteve za kolesa - 7. del: Preskusne metode za kolesa in
obroče (ISO 4210-7:2023)
Cycles - Safety requirements for bicycles - Part 7: Wheel and rim test methods (ISO
4210-7:2023)
Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 7: Prüfverfahren
für Laufräder und Felgen (ISO 4210-7:2023)
Cycles - Exigences de sécurité pour les bicyclettes - Partie 7: Méthodes d'essai des
roues et des jantes (ISO 4210-7:2023)
Ta slovenski standard je istoveten z: EN ISO 4210-7:2023
ICS:
43.150 Kolesa Cycles
SIST EN ISO 4210-7:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4210-7:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 4210-7:2023


EN ISO 4210-7
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2023
EUROPÄISCHE NORM
ICS 43.150 Supersedes EN ISO 4210-7:2014
English Version

Cycles - Safety requirements for bicycles - Part 7: Wheel
and rim test methods (ISO 4210-7:2023)
Cycles - Exigences de sécurité pour les bicyclettes - Fahrräder - Sicherheitstechnische Anforderungen an
Partie 7: Méthodes d'essai des roues et des jantes (ISO Fahrräder - Teil 7: Prüfverfahren für Laufräder und
4210-7:2023) Felgen (ISO 4210-7:2023)
This European Standard was approved by CEN on 13 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4210-7:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4210-7:2023
EN ISO 4210-7:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4210-7:2023
EN ISO 4210-7:2023 (E)
European foreword
This document (EN ISO 4210-7:2023) has been prepared by Technical Committee ISO/TC 149 "Cycles"
in collaboration with Technical Committee CEN/TC 333 “Cycles” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4210-7:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4210-7:2023 has been approved by CEN as EN ISO 4210-7:2023 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 4210-7:2023

---------------------- Page:
...