EN 13480-5:2012/A2:2017

Metallic industrial piping - Part 5: Inspection and testing

Specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480 3 and EN 13480-6 (if applicable), and fabricated and installed in accordance with EN 13480-4.

Metallische industrielle Rohrleitungen - Teil 5: Prüfung

Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle

Kovinski industrijski cevovodi - 5. del: Pregled in preskušanje - Dopolnilo A2

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2017
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 5 - Inspection and testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-5:2012/A2:2017 - Metallic industrial piping - Part 5: Inspection and testing

Relations

• Replaced By: EN 13480-5:2017 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 05-Jul-2017
• Amends: EN 13480-5:2012 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-5:2012/A2:2017
01-maj-2017
Kovinski industrijski cevovodi - 5. del: Pregled in preskušanje - Dopolnilo A2
Metallic industrial piping - Part 5: Inspection and testing
Metallische industrielle Rohrleitungen - Teil 5: Prüfung
Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle
Ta slovenski standard je istoveten z: EN 13480-5:2012/A2:2017
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-5:2012/A2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-5:2012/A2:2017

---------------------- Page: 2 ----------------------

SIST EN 13480-5:2012/A2:2017


EN 13480-5:2012/A2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2017
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Metallic industrial piping - Part 5: Inspection and testing
Tuyauteries industrielles métalliques - Partie 5: Metallische industrielle Rohrleitungen - Teil 5: Prüfung
Inspection et contrôle
This amendment A2 modifies the European Standard EN 13480-5:2012; it was approved by CEN on 16 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-5:2012/A2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-5:2012/A2:2017
EN 13480-5:2012/A2:2017 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2. 4
2 Modification to 7.2.4 . 4
3 Modification to 7.2.5 . 7
4 Modification to 8.4.3 . 7
5 Modification to 8.4.4.3 . 8
6 Modification to Bibliography . 8

2

---------------------- Page: 4 ----------------------

SIST EN 13480-5:2012/A2:2017
EN 13480-5:2012/A2:2017 (E)
European foreword
This document (EN 13480-5:2012/A2:2017) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017, and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of EN 13480-
5
...