EN ISO 14245:2010

Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)

ISO 14245:2005 specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service.

Gasflaschen - Spezifikation und Prüfung von Flaschenventilen für Flüssiggas (LPG) - Selbstschließend (ISO 14245:2006)

Diese Internationale Norm legt Anforderungen an Auslegung, Spezifikation und Baumusterprüfung von selbstschließenden
Flaschenventilen für Flüssiggas (LPG, en: Liquified Petroleum Gas), speziell zur Verwendung
mit LPG-Gasflaschen mit einem geometrischen Volumen von 0,5 l bis einschließlich 150 l fest. Sie enthält
Verweisungen auf zugehöriges Zubehör für den Betrieb in der Gas- und Flüssigphase.
ANMERKUNG Anhang B enthält Empfehlungen für Produktionsprüfungen und -inspektionen.
Diese Internationale Norm gilt nicht für in Fahrzeugen fest eingebaute Einrichtungen.

Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture automatique (ISO 14245:2006)

L'ISO 14245:2005 spécifie les exigences de conception, les spécifications et les essais de type des valves à fermeture automatique spécifiquement installées sur les bouteilles de GPL transportables et rechargeables, d'une capacité en eau de 0,5 l à 150 l. Elle comprend des références aux équipements associés pour le service en phase gazeuse ou liquide.

Plinske jeklenke - Specifikacija in preskušanje ventilov za jeklenke za utekočinjeni naftni plin (UNP) - Samozaporni ventili (ISO 14245:2006)

Ta mednarodni standard določa zahteve za načrtovanje, specifikacijo in tipsko preskušanje namenskih samozapornih ventilov za jeklenke za utekočinjeni naftni plin (UNG) za izrecno uporabo s prenosnimi jeklenkami za utekočinjeni naftni plin za večkratno polnjenje s prostornino od 0,5 l do 150 l. Vključuje sklice na povezano opremo za oskrbo s paro ali tekočinami.

General Information

• Status: Withdrawn
• Publication Date: 01-Jun-2010
• Withdrawal Date: 17-Sep-2019
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• ICS: 23.060.20 - Ball and plug valves
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Sep-2019
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN ISO 14245:2010 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)

Relations

• Replaces: EN 13152:2001/A1:2003 - Specification and testing of LPG cylinder valves - Self closing
• Effective Date: 08-Jun-2010
• Replaces: EN 13152:2001 - Specification and testing of LPG cylinder valves - Self closing
• Effective Date: 25-Feb-2009
• Replaced By: EN ISO 14245:2019 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2019)
• Effective Date: 25-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14245:2010
01-oktober-2010
1DGRPHãþD
SIST EN 13152:2002
SIST EN 13152:2002/A1:2003
3OLQVNHMHNOHQNH6SHFLILNDFLMDLQSUHVNXãDQMHYHQWLORY]DMHNOHQNH]DXWHNRþLQMHQL
QDIWQLSOLQ8136DPR]DSRUQLYHQWLOL,62
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO
14245:2006)
Gasflaschen - Spezifikation und Prüfung von Flaschenventilen für Flüssiggas (LPG) -
Selbstschließend (ISO 14245:2006)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture
automatique (ISO 14245:2006)
Ta slovenski standard je istoveten z: EN ISO 14245:2010
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN ISO 14245:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14245:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 14245:2010


EUROPEAN STANDARD
EN ISO 14245

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2010
ICS 23.020.30 Supersedes EN 13152:2001
English Version
Gas cylinders - Specifications and testing of LPG cylinder valves
- Self-closing (ISO 14245:2006)
Bouteilles à gaz - Spécifications et essais pour valves de Gasflaschen - Spezifikation und Prüfung von
bouteilles de GPL - Fermeture automatique (ISO Flaschenventilen für Flüssiggas (LPG) - Selbstschließend
14245:2006) (ISO 14245:2006)
This European Standard was approved by CEN on 20 May 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14245:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14245:2010
EN ISO 14245:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14245:2010
EN ISO 14245:2010 (E)
Foreword
The text of ISO 14245:2006 has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 14245:2010 by
Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories” the secretariat of
which is held by NSAI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn
at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13152:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14245:2006 has been approved by CEN as a EN ISO 14245:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14245:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 14245:2010

INTER
...