EN ISO 16929:2021

Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2021)

This document defines a test method used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for the evaluation of the industrial compostability of plastics as outlined in ISO 17088.
The test method laid down in this document is also used to determine the influence of the test material on the composting process and the quality of the compost obtained. This test method cannot be used to determine the aerobic biodegradability of a test material.
NOTE       Other methods are available for this test (for example, see ISO 14851, ISO 14852 or ISO 14855-1 and ISO 14855-2).

Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter festgelegten Bedingungen der Kompostierung mittels einer Technikumsmaßstab-Prüfung (ISO 16929:2021)

Dieses Dokument legt ein Prüfverfahren zur Bestimmung des Zersetzungsgrads von Kunststoffmaterialien unter festgelegten Bedingungen in einer aeroben Kompostierprüfung im Technikumsmaßstab fest. Es ist Teil eines Gesamtschemas zur Bewertung der industriellen Kompostierbarkeit von Kunststoffen, wie in ISO 17088 dargelegt.
Das in diesem Dokument festgelegte Prüfverfahren dient auch zur Bestimmung des Einflusses der Prüf-substanz auf den Kompostierungsprozess und die Qualität des erhaltenen Komposts. Dieses Prüfverfahren kann nicht zur Bestimmung der aeroben Bioabbaubarkeit einer Prüfsubstanz ange-wendet werden.
ANMERKUNG Für diese Prüfung stehen andere Verfahren zur Verfügung (siehe z. B. ISO 14851, ISO 14852 oder ISO 14855 1 und ISO 14855 2).

Plastiques - Détermination du degré de désintégration des matériaux plastiques dans des conditions de compostage définies lors d'un essai à échelle pilote (ISO 16929:2021)

Le présent document définie une méthode d'essai utilisée pour déterminer le degré de désintégration des matériaux plastiques lors d'un essai de compostage aérobie à échelle pilote dans des conditions définies. Elle fait partie d'un programme global pour l'évaluation de l'aptitude des plastiques au compostage, comme indiqué dans l'ISO 17088.
La méthode d'essai exposée dans le présent document peut également être utilisée pour déterminer l'influence du matériau d'essai sur le processus de compostage et la qualité du compost obtenu. Cette méthode d'essai ne peut être utilisée pour déterminer la biodégradabilité aérobie d'un matériau d'essai.
NOTE       Il existe d'autres méthodes pour cet essai (voir par exemple l'ISO 14851, l'ISO 14852 ou l'ISO 14855-1 et l'ISO 14855-2).

Polimerni materiali - Ugotavljanje stopnje razpada polimernih materialov pri določenih pogojih kompostiranja v pilotnem merilu (ISO 16929:2021)

General Information

• Status: Published
• Publication Date: 30-Mar-2021
• Withdrawal Date: 29-Sep-2021
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 31-Mar-2021
• Completion Date: 31-Mar-2021
• Ref Project: SIST EN ISO 16929:2021 - Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2021)

Relations

• Replaces: EN ISO 16929:2019 - Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2019)
• Effective Date: 07-Apr-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2021
Nadomešča:
SIST EN ISO 16929:2020
Polimerni materiali - Ugotavljanje stopnje razpada polimernih materialov pri
določenih pogojih kompostiranja v pilotnem merilu (ISO 16929:2021)
Plastics - Determination of the degree of disintegration of plastic materials under defined
composting conditions in a pilot-scale test (ISO 16929:2021)
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter
festgelegten Bedingungen der Kompostierung mittels einer Technikumsmaßstab-Prüfung
(ISO 16929:2021)
Plastiques - Détermination du degré de désintégration des matériaux plastiques dans
des conditions de compostage définies lors d'un essai à échelle pilote (ISO 16929:2021)
Ta slovenski standard je istoveten z: EN ISO 16929:2021
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16929
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 16929:2019
English Version
Plastics - Determination of the degree of disintegration of
plastic materials under defined composting conditions in a
pilot-scale test (ISO 16929:2021)
Plastiques - Détermination du degré de désintégration Kunststoffe - Bestimmung des Zersetzungsgrades von
des matériaux plastiques dans des conditions de Kunststoffmaterialien unter festgelegten Bedingungen
compostage définies lors d'un essai à échelle pilote der Kompostierung mittels einer Technikumsmaßstab-
(ISO 16929:2021) Prüfung (ISO 16929:2021)
This European Standard was approved by CEN on 13 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16929:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 16929:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2021, and conflicting national standards
shall be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16929:2019.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16929:2021 has been approved by CEN as EN ISO 16929:2021 without any modification.

INTERNATIONAL ISO
STANDARD 16929
Fourth edition
2021-03
Plastics — Determination of the
degree of disintegration of plastic
materials under defined composting
conditions in a pilot-scale test
Plastiques — Détermination du degré de désintégration des
matériaux plastiques dans des conditions de compostage définies lors
d'un essai à échelle pilote
Reference number
ISO 16929:2021(E)
©
ISO 2021
ISO 16929:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 16929:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test procedure . 3
6.1 Actions before and during incubation . 4
6.1.1 Start-up of the test . 4
6.1.2 Turning . 5
6.1.3 Termination of the test . 5
6.2 Analysis and process control . 6
6.2.1 Start-up of the test . 6
6.2.2 During the test . 7
6.2.3 Termination of the test . 8
7 Calculation . 9
8 Validity of the test . 9
9 Test report . 9
Bibliography .11
ISO 16929:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 14,
Environmental aspects, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 249, Plastics, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 16929:2019), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— in 6.1.1, the minimum amount of biowaste has been changed to 15 kg from 30 kg due to the smaller
size of composting bins;
— in 6.2.2.3, a separate temperature profile has been added to cover tests including also production of
compost for ecotoxicity tests.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

ISO 16929:2021(E)
Introduction
The biological treatment of biodegradable plastic materials includes aerobic composting in well-
operated, municipal or industrial biological waste treatment facilities. Determining the degree of
disintegration of plastic materials in a pilot-scale plant is an important step within a test scheme to
evaluate the industrial compostability of such materials.
To claim industrial compostability, a material not only has to disintegrate in a composting system, it
also has to biodegrade in a composting system (as can be shown by standard test methods) and has to
complete its biodegradation during the end-use of the compost. Furthermore, the compost has to meet
the relevant quality criteria, including low content of regulated metals, no ecotoxicity, and no obviously
distinguishable residues.
INTERNATIONAL STANDARD ISO 16929:2021(E)
Plastics — Determination of the degree of disintegration of
plastic materials under defined composting
...