EN 16123:2013
(Main)Characterization of waste - Guidance on selection and application of screening methods
Characterization of waste - Guidance on selection and application of screening methods
This European Standard gives guidance on the selection and application of screening methods for waste characterisation. The aim of this document is to set up criteria as to when the different kinds of screening methods may be applied for the analysis of a certain parameter in waste and which steps are required to prove their suitability.
This document does not recommend any particular screening method, but confirms the principles of its selection and application.
Charakterisierung von Abfall - Anleitung für Auswahl und Anwendung von Screening-Verfahren
Diese Europäische Norm gibt eine Anleitung für die Auswahl und Anwendung von Screening-Verfahren für die Charakterisierung von Abfällen. Die Zielsetzung dieses Dokumentes ist es, Kriterien festzulegen, wann die verschiedenen Screening-Verfahren für die Analyse eines bestimmten Parameters bei Abfällen angewendet werden können und welche Schritte zum Nachweis ihrer Eignung erforderlich sind.
Dieses Dokument schlägt kein besonderes Screening-Verfahren vor, es legt jedoch die Grundsätze ihrer Auswahl und Anwendung fest.
Caractérisation des déchets - Lignes directrices relatives au choix et à l'application des méthodes de dépistage
La présente Norme européenne fournit des recommandations relatives au choix et à l’application des méthodes de dépistage pour la caractérisation des déchets. Le but du présent document est de fixer des critères portant sur les différents types de méthodes de dépistage susceptibles d’être appliquées pour l’analyse d’un paramètre donné relatif à un déchet, et de préciser quelles étapes sont nécessaires pour en démontrer l’adéquation.
Le présent document ne recommande aucune méthode de dépistage en particulier mais il en confirme les principes de choix et de mise en œuvre.
Karakterizacija odpadkov - Navodilo za izbiro in uporabo rešetalnih metod
Ta evropski standard vsebuje navodilo za izbiro in uporabo rešetalnih metod za karakterizacijo odpadkov. Cilj dokumenta je postavitev kriterijev, kdaj naj se različne vrste rešetalnih metod uporabijo za analizo določenih parametrov pri odpadkih in kateri koraki so potrebni za dokazilo njihove ustreznosti. Ta dokument ne priporoča nobene določene rešetalne metode, potrjuje pa načela njene izbire in uporabe.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Karakterizacija odpadkov - Navodilo za izbiro in uporabo rešetalnih metodCharakterisierung von Abfall - Leitfaden für Auswahl und Anwendung von Screening-VerfahrenCaractérisation des déchets - Lignes directrices relatives au choix et à l'application des méthodes de dépistageCharacterization of waste - Guidance on selection and application of screening methods13.030.01Odpadki na splošnoWastes in generalICS:Ta slovenski standard je istoveten z:EN 16123:2013SIST EN 16123:2013en,fr,de01-julij-2013SIST EN 16123:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16123
February 2013 ICS 13.030.01 English Version
Characterization of waste - Guidance on selection and application of screening methods
Caractérisation des déchets - Lignes directrices relatives au choix et à l'application des méthodes de dépistage
Charakterisierung von Abfall - Anleitung für Auswahl und Anwendung von Screening-Verfahren This European Standard was approved by CEN on 7 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16123:2013: ESIST EN 16123:2013
Decision making process . 14 SIST EN 16123:2013
Example of documentation aid/check list . 15 Annex C (informative)
Statistical tool for individual comparability – Equality of results from reference method and screening method: Mean value t-test for real samples . 18 C.1 General . 18 C.2 Test on outliers . 18 C.3 Homogeneity of variances . 18 C.4 Mean value t-test . 19 Bibliography . 21
Screening methods are of increasing interest in processes such as entrance control because, in addition to standardized methods, they allow fast verification of the documented waste characteristics. SIST EN 16123:2013
This document does not recommend any particular screening method, but confirms the principles of its selection and application. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16192,
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 reference method method which is performed in accordance with national or international Standards and is not necessarily comparable with screening methods 3.2 on-site verification third level of inspection according to the Landfill Directive and the Landfill Decision to ensure that the waste accepted at a landfill is the same as described in the accompanying documents and that it is in accordance with the basic characterisation and/or compliance testing 3.3 screening application of any analytical semi-quantitative method for exploratory analysis 3.4 screening method method which is used (often on-site) to quickly explore a given area or test a set of samples and obtain data on sample characteristics [SOURCE: ISO 12404, modified] 4 Principles This standard defines the whole process from the selection of the screening method, applicability, fit-for-purpose testing, fulfilment of the acceptance criteria, quality control, and documentation of the measurement results. SIST EN 16123:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.