Founding - Compacted (vermicular) graphite cast irons

This European Standard defines the grades and the corresponding requirements for compacted (vermicular) graphite cast irons.
This European Standard specifies 5 grades of compacted (vermicular) graphite cast iron by a classification based on mechanical properties measured on machined test pieces prepared from cast samples.
This European Standard does not cover technical delivery conditions for iron castings (see EN 1559-1 [1] and EN 1559-3 [2]).

Gießereiwesen - Gusseisen mit Vermiculargraphit

Diese Europäische Norm definiert die Sorten für und die entsprechenden Anforderungen an Guss¬eisen mit Vermiculargraphit.
Diese Europäische Norm legt fünf Sorten von Gusseisen mit Vermiculargraphit fest, deren Klassifi¬zierung auf den mechanischen Eigenschaften basiert, die an bearbeiteten Proben aus gegosse¬nen Probestücken gemessen wurden.
Diese Europäische Norm behandelt nicht die technischen Lieferbedingungen für Guss¬eisen (siehe EN 1559 1 [1] und EN 1559 3 [2]).

Fonderie - Fontes à graphite vermiculaire (compacté)

La présente Norme européenne définit les nuances de fonte à graphite vermiculaire (compacté) et les exigences correspondantes.
La présente Norme européenne spécifie 5 nuances de fonte à graphite vermiculaire (compacté) par le biais d’une classification basée sur les propriétés mécaniques, mesurées sur des éprouvettes usinées à partir d’échantillons coulés.
La présente Norme européenne ne couvre pas les conditions techniques de fourniture des pièces moulées en fonte (voir EN 1559-1 [1] et EN 1559-3 [2]).

Livarstvo - Železove litine s kompaktnim (vermikularnim) grafitom

Ta evropski standard določa razrede in ustrezne zahteve za železove litine s kompaktnim (vermikularnim) grafitom.
Ta evropski standard določa pet razredov železove litine s kompaktnim (vermikularnim) grafitom v skladu s klasifikacijo, ki temelji na mehanskih lastnostih, izmerjenih na strojno obdelanih preskusnih kosih iz litih vzorcev.

General Information

Status
Withdrawn
Publication Date
22-Nov-2011
Withdrawal Date
19-Dec-2023
Current Stage

Relations

Buy Standard

Standard
EN 16079:2012
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 16079:2010
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Livarstvo - Železove litine s kompaktnim (vermikularnim) grafitomGießereiwesen - Gusseisen mit VermiculargraphitFonderie - Fontes à graphite vermiculaire (compacté)Founding - Compacted (vermicular) graphite cast irons77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 16079:2011SIST EN 16079:2012en,fr,de01-februar-2012SIST EN 16079:2012SLOVENSKI
STANDARD



SIST EN 16079:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16079
November 2011 ICS 77.080.10 English Version
Founding - Compacted (vermicular) graphite cast irons
Fonderie - Fontes à graphite vermiculaire (compacté)
Gießereiwesen - Gusseisen mit Vermiculargraphit This European Standard was approved by CEN on 1 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16079:2011: ESIST EN 16079:2012



EN 16079:2011 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Designation .65Order information .66Manufacture .67Requirements .67.1General .67.2Test pieces machined from cast samples .77.3Test pieces machined from samples cut from a casting .77.4Hardness .87.5Graphite structure.88Sampling .88.1General .88.2Cast samples .98.3Samples cut from a casting . 109Test methods .
...

SLOVENSKI STANDARD
oSIST prEN 16079:2010
01-maj-2010
Livarstvo – Železove litine s kompaktnim (vermikularnim) grafitom
Founding - Compacted (vermicular) graphite cast irons
Gießereiwesen - Gusseisen mit Vermiculargraphit
Fonderie - Fontes à graphite vermiculaire (compacté)
Ta slovenski standard je istoveten z: prEN 16079
ICS:
77.080.10 Železo Irons
oSIST prEN 16079:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16079:2010

---------------------- Page: 2 ----------------------
oSIST prEN 16079:2010


EUROPEAN STANDARD
DRAFT
prEN 16079
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2010
ICS 77.080.10
English Version
Founding - Compacted (vermicular) graphite cast irons
Fonderie - Fontes à graphite vermiculaire (compacté) Gießereiwesen - Gusseisen mit Vermiculargraphit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 190.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16079:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16079:2010
prEN 16079:2010 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Designation .6
5 Order information .6
6 Manufacture .6
7 Requirements .6
8 Sampling .8
9 Test methods . 14
10 Retests . 16
11 Inspection documentation . 17
Annex A (informative) Additional information on properties and typical applications of
compacted (vermicular) graphite cast irons .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.