EN ISO 11114-1:2012/A1:2017
(Amendment)Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe (ISO 11114-1:2012/Amd.1:2017)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-1:2012/Amd 1:2017)
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del: Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2012/Amd 1:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11114-1:2012/A1:2017
01-maj-2017
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2012/Amd 1:2017)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gasflaschen - Kompatibilität von Flaschen- und Ventil-Werkstoffen mit Gasinhalten - Teil
1: Metallische Werkstoffe (ISO 11114-1:2012/Amd 1:2017)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-
1:2012/Amd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 11114-1:2012/A1:2017
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN ISO 11114-1:2012/A1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Compatibility of cylinder and valve
materials with gas contents - Part 1: Metallic materials -
Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Bouteilles à gaz - Compatibilité des matériaux des Gasflaschen - Kompatibilität von Flaschen- und Ventil-
bouteilles et des robinets avec les contenus gazeux - Werkstoffen mit Gasinhalten - Teil 1: Metallische
Partie 1: Matériaux métalliques - Amendement 1 (ISO Werkstoffe (ISO 11114-1:2012/Amd 1:2017)
11114-1:2012/Amd 1:2017)
This amendment A1 modifies the European Standard EN ISO 11114-1:2012; it was approved by CEN on 14 November 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11114-1:2012/A1:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1:2017 (E)
European foreword
This document (EN ISO 11114-1:2012/A1:2017) has been prepared by Technical Committee
ISO/TC 58 “Gas cylinders” in collaboration with Technical Committee CEN/TC 23 “Transportable gas
cylinders” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 11114-1:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and
conflicting national standards shall be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.