EN 16116-2:2013

Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons

This European Standard specifies the minimum requirements for ergonomic and structural integrity of steps and handrails used together to give staff access to freight wagons. It does not cover ladders, top platforms and top gangways.
It defines in particular the required spaces necessary for handling of screw couplings with side buffers, for shunter handrails, for shunter’s stand, for steps and handrails.
This European Standard also defines their dimensions, positions, limits for durability and functionality.
It also defines the general requirements for the access to tail lights for freight wagons.

Bahnanwendungen - Konstruktionsanforderungen an Tritte, Handgriffe und zugehörige Zugänge für das Personal - Teil 2: Güterwagen

Diese Europäische Norm legt die Mindestanforderungen für Ergonomie und Strukturfestigkeit von Tritten und Handgriffen fest, die gemeinsam verwendet werden, um dem Zugpersonal Zugang zu Güterwagen zu ermöglichen. Leitern, obenliegende Arbeitsbühnen und Laufstege liegen nicht im Anwendungsbereich dieser Norm.
Sie legt insbesondere die Freiräume fest, die für den Gebrauch von Schraubenkupplungen mit Seitenpuffern, für Kupplergriffe, für den Rangiererstand, für Tritte und für Handgriffe erforderlich sind.
Diese Europäische Norm legt ebenfalls deren Abmessungen, Positionen sowie die Grenzen für die Haltbarkeit und Funktionalität fest.
Sie legt auch die allgemeinen Anforderungen für den Zugang zu Schlusssignalen für Güterwagen fest.

Applications ferroviaires - Exigences pour la conception des marchepieds, mains courantes et accès destinés au personnel - Partie 2 : Wagons

La présente Norme européenne spécifie les exigences minimales d’intégrité ergonomique et structurelle des marchepieds et des mains courantes utilisés ensemble pour permettre l’accès du personnel aux wagons. Elle ne couvre pas les échelles, les quais supérieurs et les passerelles supérieures.
Elle définit notamment les espaces nécessaires à prévoir pour manoeuvrer les attelages à vis entre tampons latéraux, pour les mains courantes de manoeuvre, pour la plate-forme de manoeuvre, pour les marchepieds et pour les mains courantes.
La présente Norme définit également leurs dimensions, leurs positions et les limites associées à leur résistance et leur fonctionnement.
Elle définit aussi les exigences générales relatives à l’accès aux signaux de queue de train pour les wagons.

Železniške naprave - Izvedbene zahteve za stopnice, ograje in dostop za osebje - 2. del: Tovorni vagoni

General Information

• Status: Withdrawn
• Publication Date: 17-Sep-2013
• Withdrawal Date: 20-Jul-2021
• ICS: 45.060.20 - Trailing stock
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/WG 26 - Freight wagons
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Jul-2021
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 16116-2:2014 - Railway applications - Design requirements for steps, handrails and associated staff access - Part 2: Freight wagons

Relations

• Replaced By: EN 16116-2:2021 - Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Izvedbene zahteve za stopnice, ograje in dostop za osebje - 2. del: Tovorni vagoniBahnanwendungen - Konstruktionsanforderungen an Tritte, Handgriffe und damit in Zusammenhang stehende Zugänge für das Personal an GüterwagenApplications ferroviaires - Exigences pour la conception des marchepieds, mains courantes et accès du personnel - Partie 2: WagonsRailway applications - Design requirements for steps, handrails and associated staff access - Part 2: Freight wagons45.060.20Železniški vagoniTrailing stockICS:Ta slovenski standard je istoveten z:EN 16116-2:2013SIST EN 16116-2:2014en,fr,de01-april-2014SIST EN 16116-2:2014SLOVENSKI
STANDARD



SIST EN 16116-2:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16116-2
September 2013 ICS 45.060.20 English Version
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
Applications ferroviaires - Exigences pour la conception desmarchepieds, mains courantes et accès du personnel - Partie 2: Wagons
Bahnanwendungen - Konstruktionsanforderungen an Tritte, Handgriffe und zugehörige Zugänge für das Personal - Teil 2: Güterwagen This European Standard was approved by CEN on 29 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16116-2:2013: ESIST EN 16116-2:2014



EN 16116-2:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Steps and handrails . 6 4.1 General requirements . 6 4.2 Steps . 6 4.2.1 General . 6 4.2.2 Shunter's step . 7 4.2.3 Other steps .10 4.3 Handrails .10 4.3.1 General .10 4.3.2 Shunter handrail .
...