EN 12697-21:2003

Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens

This European Standard describes a test method for measuring the indentation of mastic asphalt when it is penetrated at a given temperature, load and for a fixed time period by a standardised cylindrical indentor pin with a circular flat-ended base. This European Standard applies to mastic asphalt with aggregates of maximum nominal size less or equal to 16 mm.

Asphalt - Prüfverfahren für Heißasphalt - Teil 21: Eindringversuch an Platten

Die vorliegende Europäische Norm beschreibt ein Prüfverfahren zur Messung der Eindringtiefe in Guss-asphalt, wenn bei einer festgelegten Temperatur, einer festgelegten Beanspruchung und für eine bestimmte Zeit ein genormter zylindrischer Prüfstempel mit einer kreisrunden flachen Grundfläche in diesen Asphalt eindringt. Diese Europäische Norm gilt für Gussasphalt mit einer maximalen Nennkorngröße von 16 mm oder weniger.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 21: Essai d'indentation de plaques

La présente Norme européenne décrit une méthode de mesure de l'indentation d'un asphalte coulé lorsqu'il est soumis à la pénétration d'un poinçon normalisé cylindrique avec un embout plat circulaire, à des valeurs données de température et de charge et pour un temps d'application fixé. Cette Norme européenne s'applique à des asphaltes coulés dont la dimension nominale maximale est inférieure ou égale à 16 mm.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 21. del: Preskus z vtiskanjem na plošče

General Information

• Status: Withdrawn
• Publication Date: 25-Nov-2003
• Withdrawal Date: 10-Apr-2012
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Apr-2012
• Completion Date: 11-Apr-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: SIST EN 12697-21:2004 - Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens

Relations

• Replaced By: EN 12697-21:2012 - Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
• Effective Date: 28-May-2011
• Corrected By: EN 12697-21:2003/AC:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 21: Eindringversuch an PlattenMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 21: Essai d'indentation de plaquesBituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-21:2003SIST EN 12697-21:2004en01-junij-2004SIST EN 12697-21:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-21November 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part21: Indentation using plate specimensMélanges bitumineux - Méthodes d'essai pour enrobés àchaud - Partie 21: Essai d'indentation de plaguesAsphalt - Prüfverfahren für Heißasphalt - Teil 21:Eindringversuch an PlattenThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-21:2003 ESIST EN 12697-21:2004
...